Mazak SLANT TURN 50N
Manufacturer specifications, what it is built to do, the years we have seen them listed, what tooling fits, and what to check on one. MTE also buys them outright.
What the Mazak SLANT TURN 50N is
The Mazak SLANT TURN 50N is a CNC turning center — a machine for turning round parts between a chuck and, where fitted, a tailstock — shafts, flanges, housings and bar work.
Mazak SLANT TURN 50N specifications
Further specifications those listings report
2 independent dealer listings were used, cross-checked against each other, and are recorded in our sourcing record.
What years the Mazak SLANT TURN 50N was built
Across the units we have tracked, build years run from 1994 to 2012. Observed across 25 marketplaces, not a manufacturer build record.
Mazak SLANT TURN 50N machines on the market now
We track listings across 25 used-machinery marketplaces, and every competitor in this market is one of them, so this is a view none of them can produce for themselves. Right now there are 10 units of this exact designation on the market, drawn from 3 independent sources, spanning model years 1994 to 2012. A seller is competing with those units, which is why condition, tooling and control generation decide the number.
We count only listings whose model is spelled as this machine’s own designation. Near spellings that may be a different variant are excluded rather than counted, so this is a floor on what is out there, not a total.
What to check on a Mazak SLANT TURN 50N
The same list whichever side of the deal you are on.
- Control generation. The specification we hold for this model does not name its control. The control is often the single biggest swing on two otherwise identical machines, because it decides which buyers can use it at all.
- Spindle hours and condition. Most controls show run hours on a maintenance or diagnostics screen. It is the first number anyone asks for, so find it before the conversation rather than during it.
- Tooling and accessories. Holders, chucks, steady rests, probing and automation attachments travel with the machine, and they are worth real money separately from it.
- Turret condition and index time. A turret that has been crashed is the expensive repair on a lathe, and index time is the first thing a buyer times.
- Live tooling and the sub-spindle, if fitted. Whether the rotary tools still drive, and whether the second spindle synchronizes, separates two very different machines that share a model number.
- The tailstock and steady rests. They travel with the machine and they are counted.
- Power and rigging access. How the machine comes out of the building is a real cost, and it is one MTE absorbs, so an accessible machine is worth more to us.
Machines buyers cross-shop with the Mazak SLANT TURN 50N
Other CNC turning centers in this directory. We publish no max turning diameter for this machine, so these are ordered by how often people search for them rather than by size.
Mazak QT-250
- Swing over bed
- 24.04 in / 610 mm
- Max turning diameter
- 13.780 in / 350 mm
- Max turning length
- 18.733 in / 475 mm (20 in bed); 39.108 in / 995 mm (40 in bed); 58.858 in / 1495 mm (60 in bed)
- Chuck size
- 10″
Okuma L-1420
- Max turning diameter
- 14.17 in / 366 mm
- Max turning length
- 26.06 in (662 mm) on the 650 bed / 49.68 in (1262 mm) on the 1250 bed
DMG MORI SL-35B/1500
- Swing over bed
- 23.6 in.
- Max turning diameter
- 16.5 in.
Dealer-sourced figures, not manufacturer published.
The rest of the CNC turning centers in this directory: DMG MORI NLX 2500SY · DMG MORI SL-603CMC/2000 · DMG MORI SL-65C · Doosan PUMA 400LC · Mazak HQR-250MSY-850U · Mazak QTN-200MSY-II · Mazak QTU-350 MY · Okuma IMPACT LU-15 · Okuma LB-300
Browse the whole CNC Lathes catalog, or see everything we buy from Mazak.
Have a Mazak SLANT TURN 50N to sell?
We are the buyer, not a broker. No listing fee, no commission, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, we handle rigging and freight, and we pay at pickup.