2014 Makino V33I-5XB
CNC 5-Axis Machining Centers · 2 listings (surplusrecord.com, equipt.com)
CNC 5-Axis Machining Centers
Makino V33I-5XB
3 Makino V33I-5XB listings have come through the used market we track: 3 marketplaces, built 2014 where given; 2 machines once repeats are merged.
25.6 inX-axis travel
12.7 inY-axis travel
13.7 inZ-axis travel
20,000 RPMSpindle speed
What the maker publishes about the current Makino V33I-5XB
Makino put a tilting trunnion table on the V33i-5XB so that die and mold shops can mill 3D shapes with the five axes interpolating together, or fix the two rotary axes and cut in 3+2 fashion. The table is a 200 mm pallet that tilts through 130 degrees, from minus 20 to plus 110, and turns a full 360 degrees, carrying up to 30 kg on parts as large as 250 mm across and 135 mm high, with some limits. Linear strokes come to 650 mm (X), 325 mm (Y) and 350 mm (Z), with 20 m/min rapids and cutting feed up to 787 in/min. Standard speed is 20,000 rpm, with 30,000 and 40,000 rpm spindles optional; the magazine starts at 25 pockets, with 40 and 60 as options, for tools 80 mm in diameter and 7 kg. Besides core cooling of the ballscrews and spindle, the page names a hydraulic Nano Slideway circuit on X and a separate oilmatic unit for holding machine temperatures.
Source: Makino, October 27, 2026.
What the Makino V33I-5XB is used for
Makino's page points the V33i-5XB at die and mold work: 3D shapes milled on five axes at once, parts reached on several sides in one setup, and undercuts and awkward features reached with short tools.
Source: Makino, October 27, 2026.
Makino V33I-5XB specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX
650 mm
Y-axis travelY
325 mm
Z-axis travelZ
350 mm
Spindle and speed
Max spindle speedSpindle RPM
20,000 rpmstandard; 30,000 and 40,000 optional
Rapid traverseRapid Traverse
20 m/min
Table, turret and tools
Max table loadMaximum Payload
30 kg
Pallet sizePallet
Ø200 mm
Tool capacityATC Capacity
25 (40, 60 opt)
Further figures the manufacturer publishes
A-Axis
130° (-20° ~ + 110°)
C-Axis
360°
Cutting Feedrate
787 in/min
Maximum Workpiece
Ø250 × 135 mmwith limitations
Tool to Tool
4.8 sec
Maximum Tool Diameter
80 mm
Maximum Tool Weight
7 kg
- manufacturer specification page, fetched October 27, 2026.
What fits a Makino V33I-5XB
Each of these follows from a published specification above, which is named beside it.
Pallets and fixturing
Fixtures, tombstones and spare pallets are cut for a pallet of this size and do not transfer to another machine. On a horizontal they are a large share of what is being sold, so count them before quoting.
Derived from Pallet size: Ø200 mm
What to check on a Makino V33I-5XB
- Spindle. The manufacturer gives a spindle speed of 20,000 rpm (standard; 30,000 and 40,000 optional). Run the spindle to top speed and listen for bearing noise.
- Axes and way covers. The manufacturer gives X 650 mm, Y 325 mm and Z 350 mm of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 20 m/min. Measure the backlash on each axis.
- Tool changer. The manufacturer gives the tool capacity as 25 (40, 60 opt). Cycle every pocket and watch for a hesitation.
- Pallet changer. The manufacturer gives a pallet size of Ø200 mm. Run a full pallet change, and count the pallets and fixtures that come with the machine.
- Table. The manufacturer gives a table load of 30 kg. Check the table and its T-slots for damage.
Makino V33I-5XB listing history
Where it was listed
equipt.com
1 listing, 2014
machinetools.com
1 listing
surplusrecord.com
1 listing, 2014
Model years seen
2014 ×2.
What Makino V33I-5XB listings agree on
X-axis travel
25.6 in
Y-axis travel
12.7 in
Z-axis travel
13.7 in
Spindle speed
20,000 RPM
Looking for a Makino V33I-5XB for sale?
We have tracked 3 Makino V33I-5XB listings on 3 marketplaces (equipt.com, machinetools.com and surplusrecord.com), model year 2014. We buy Makino V33I-5XB machines and do not sell them.
Every Makino V33I-5XB we have tracked
1 more listing, no year.
The Makino V33I-5XB among machining centers and mills
Browse all CNC 5-Axis Machining Centers, or see every Makino machine we track.
Makino V33I-5XB variants and related models
Makino V33I GRAPHITE
Variant
Makino V22
Same series
- Tool capacity
- 30 (60 opt)3this model: 25 (40, 60 opt)2
- Max table load
- 100 kg3this model: 30 kg2
Makino V80S
Same series
- Makino V33I: manufacturer specification page, fetched October 27, 2026.
- Makino V33I-5XB: manufacturer specification page, fetched October 27, 2026.
- Makino V22: manufacturer specification page, fetched October 27, 2026.
Have a Makino V33I-5XB to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
