DMG MORI NL-2000/500

What the maker published about the DMG MORI NL-2000/500

Mori Seiki's NL2000/500 appears among the NL2000 CNC lathes, and its page gives no Y axis, no rotary tool speed and no second spindle. A workpiece may measure 356 mm across at most and run up to 510 mm in length, 275 mm being the standard diameter. The X axis has 260 mm of travel and the Z axis 590 mm. Its spindle speed range ends at 5,000 min-1, and the maker warns that some tools and clamping make that top speed unusable. On the turret, 12 tool places are standard, and a 10 place turret is the option. Rapid rates, chuck size and bar capacity are not given, nor are a control, a motor rating or a weight.

Source: Mori Seiki, an archived copy of the maker's page from 2004, October 27, 2026.

What the DMG MORI NL-2000/500 is used for

Mori Seiki's 2004 NL page counts 30 versions of the series on a small frame; the NL2000/500, with an 8-inch chuck and no suffix letter, takes chucked work of up to 356 mm diameter and 510 mm length.

Source: Mori Seiki, an archived copy of the maker's page from 2004, October 28, 2026.

When the DMG MORI NL-2000/500 was built

Mori Seiki had an English spec page up for the NL2000/500 by July 2004, so the lathe was in production by 2004.

Source: Mori Seiki, an archived copy of the maker's page from 2004, October 28, 2026.

DMG MORI NL-2000/500 listing history

Where it was listed

Model years seen

2008, 2007 ×3.

What DMG MORI NL-2000/500 listings agree on

Looking for a DMG MORI NL-2000/500 for sale?

We have tracked 4 DMG MORI NL-2000/500 listings on 4 marketplaces (equipt.com, exapro.com, revelationmachinery.com and surplusrecord.com), model years 2007 to 2008. We buy DMG MORI NL-2000/500 machines and do not sell them.

2008 · 2007 · 2007

Every DMG MORI NL-2000/500 we have tracked

The DMG MORI NL-2000/500 among lathes and turning centers

Browse all CNC Lathes, or see every DMG MORI machine we track.

DMG MORI NL-2000/500 variants and related models