Sell your Okuma ES-L6 2008 today.
Okuma ES-L6 Specifications
| Z-Axis (Upper/Lower Turret) | 12.6" |
|---|---|
| Upper Turret Positions | 12 |
| Horsepower Of Rotary Tools | 10 HP |
| Sub Spindle Bar Capacity | 2" |
| Bar Capacity Right And Left Spindles | 2" |
| Chip Conveyor | Included |
| Max. Turning Diameter - Lower | 11.8" |
| Nose | R 2B |
| Max Machining Dia. | 11.8" |
| Cutting Feed Rate | 0.1 to 200 IPM |
| Approximate Overall Dimensions | 76" x 67" |
| Tailstock Quill Diameter | Programmable |
| Swing Over Bed | 17.72" |
| C-Axis (Spindle Rotation) | Included |
| Max. Work Piece Weight | Not specified |
| Max. Toll Diameter | Not specified |
| Shipping | Not specified |
| Control Model | OSP U10L CNC Control |
| Table Horse Power | Not specified |
| Spindle Bore Diameter 2 | 2.36" |
| Xb - Axis Travel | 6.1" |
| Upper Turret Tool Capacity | 12 |
| Main Motor (20 Min) | Not specified |
| Spindle Motor (HP) | 10 HP |
| Rapid Traverse Rates | X: 591 IPM, Z: 591 IPM |
| Axis Travel | X: 6.1", Z: 12.6" |
| Boards Included | Not specified |
| Z Axis Travel Lower | Not specified |
| Collet | Not specified |
| Main Motor | Not specified |
| Rapid Traverse Rate - Z Axis | 591 IPM |
| Spindle Bore Diameter 1 | Not specified |
| Rapid Traverse Rate Z | 591 IPM |
| Swing Over Compound Slide | 11.81" |
| Max. Turning Diameter (Xa) | Not specified |
| Travel X-Axis | 6.1" |
| Spindle Taper | Not specified |
| Number Of Tool Turrets | 1 |
| B - Axis Milling Spindle Taper | Not specified |
| Spindle Power 2 | Not specified |
| Bar Feeder Length | Not specified |
| Sub Spindle Motor (HP) | Not specified |
| Rapid Traverse Speed (Y-Axis) | Not specified |
| Range Of Spindle Speed Main/Sub | 133 - 6,000 RPM |
| Rapid Traverse Speed (Z-Axis) | 591 IPM |
| Axes | X, Z |
| Auto Tool Presetter | Not specified |
| Weight (Approx) | 6,170 LBS |
| Chuck Bore Diameter | Not specified |
| Spindle Bearing Inner Diameter | Not specified |
| Rapid Traverse Ya & Yb Axis | Not specified |
| Z-Axis (Upper/Lower) | 12.6" |
| Max Swing Over Carriage | 13.78" |
| Tool Presetter | Included |
| Max Bar Capacity Main Spindle | 2" |
| Current Type | 220/3/60 |
| Sub Spindle Speed | Not specified |
| Spindle Drive Motor | Not specified |
| Sub | Not specified |
| Rapid Traverse X-Axis | 591 IPM |
| Milling Spindle RPM | Not specified |
| Center | Not specified |
| X - Axis Upper/Lower Turret | 6.1" |
| Main Motors | Not specified |
| Maximum Swing Over Saddle | Not specified |
| Spindle Nose Sub | Not specified |
| X-Axis (Lower Turret) | Not specified |
| X - Axis Travel | 6.1" |
| Insulation Class | Not specified |
| Tailstock Type | Programmable |
| Max Machining Length | 11" |
| Turning Length | Not specified |
| RPM Range | 133 - 6,000 RPM |
| Features & Options (Varies By Configuration) | Expanded Auto Chamfer, Thread Feed Hold, Animation, Lap-4, User Task 2, NC Torque Limit, Hi-G Control, Inch/Metric Switch, MACMAN, Cycle Time Calculator, Cycle Time Reducer, PLC |
| X1 Axis Travel | Not specified |
| Swin Over Bed | 17.72" |
| Integration With Cad/Cam Systems | Not specified |
| Max Bar Capacity | 2" |
| Spindle Bore | 2.36" |
| Sub Spindle | Included |
| Distance Between Spindle Center Lines | 11.02" |
| Spindle Speed Sub Spindle | Not specified |
| Z-Axis Travel (Upper Slide) | Not specified |
| C2 - Axis Travel | Not specified |
| Rapid Traverse Rates Y1 | Not specified |
| Cross-Slide Travel (X Axis) Upper Turret | 6.1" |
| Diameter Above Transversing Slide | Not specified |
| Sccr Of Control Panel | Not specified |
| Spindle Bearings | Not specified |
| Tool Stations | Not specified |
| Location | Not specified |
| Bar Bore | Not specified |
| X2 Axis Travel | Not specified |
| Zb - Axis Travel | Not specified |
| Live Tool HP | Not specified |
| Live Milling Motor | Not specified |
| Type Of Nose | R 2B |
| X-Axis Travel | 6.1" |
| Xa Turret | Not specified |
| Sub Spindle - Chuck Size | Not specified |
| Primary | Not specified |
| Dimensions | 76" x 67" |
| Travels | X: 6.1", Z: 12.6" |
| Overall Dimensions | 76" x 67" |
| L X W | 76" x 67" |
| C-Axis Rotation | Included |
| Range | Not specified |
| Sub Spindle Motor | Not specified |
| Number Of Gear Ranges | Not specified |
| Bed Length Of Lower Slideway | Not specified |
| Additional Features | Not specified |
| # Axis | 2 |
| Travel (X) | 6.1" |
| Horsepower Head 1 | Not specified |
| Head 2 | Not specified |
| C – Axis Travel | Included |
| Main Spindle Speeds | 133 - 6,000 RPM |
| Rapid Traverse (X/Y/Z) | X: 591 IPM, Z: 591 IPM |
| Za Axis Travel | Not specified |
| Rapid Traverse Z Axis | 591 IPM |
| Z-Axis | 12.6" |
| No. Positions On Upper Turret | 12 |
| Spindle Horsepower | 10 HP |
| Sub Spindle Chuck | Not specified |
| Longitudinal Travel (Z Axis) | 12.6" |
| Second Spindle HP | Not specified |
| Rapid Traverse X | 591 IPM |
| Z Axis | 12.6" |
| Center Diameter | Not specified |
| Machine Dimensions | 76" x 67" |
| W - Axis Travel (Right Spindle) | Not specified |
| Spdl Dia At Front Bearing | Not specified |
| Quill Travel | Not specified |
| Feedrate X | Not specified |
| Live Stations For Rotary Tools | Not specified |
| X-Axis (Cross Travel Of Upper Turret) | 6.1" |
| Motor Phase | 3 |
| Tails Stock Quill Diameter | Programmable |
| Stroke | Not specified |
| Above The Bed | 17.72" |
| Machine Weight | 6,170 LBS |
| Od Tool Shank Size | Not specified |
| Spindle Bore (First/Second) | 2.36" |
| Tailstock | Programmable |
| Number Of Axis | 2 |
| Tooling | Not specified |
| Equipment Dimensions (Approx.) | Not specified |
| Sub Spindle Speeds | Not specified |
| X1 / X2 Travel | Not specified |
| Live Tooling Speed Range | Not specified |
| Z - Axis Travel Z1 | Not specified |
| Mfr | Okuma |
| Pickoff | Not specified |
| X - Axis Upper | 6.1" |
| Spindle Bearing Diameter | Not specified |
| Spindle Bar Capacity (Main Spindle) | 2" |
| Number Of Tool Holders | Not specified |
| No. Stations On Turret | 12 |
| Approximate Machine Dimensions | 76" x 67" |
| Travels Xa & Xb | 6.1" |
| C1-Axis (Indexing Positions Of Main Spindle) | Not specified |
| Tailstock Quill Dia | Programmable |
| Controller | OSP U10L CNC Control |
| Sub-Spindle Rapid Traverse | Not specified |
| C2-Axis (Indexing Positions Of Sub Spindle) | Not specified |
| Approx Machine Weight | 6,170 LBS |
| Rapid Traverse (Z) | 591 IPM |
| X Axis Rapid Traverse | 591 IPM |
| Z - Axis Lower | Not specified |
| Quill Stroke | Not specified |
| Sub-Spindle Torque | Not specified |
| Rapid Traverse Rate - X1 | Not specified |
| Tailstock Travel | Not specified |
| B - Axis Travel Sub Spindle | Not specified |
| Second Spindle Bore | Not specified |
| Loader Maximum Size | Not specified |
| Rapid Traverse Rate X-Axis | 591 IPM |
| Main Bore Diameter | Not specified |
| Weight Of Components | Not specified |
| Max Work Length | 11" |
| Tailstock Spindle Travel | Not specified |
| Bar Stock Capacity | 2" |
| Rapid Traverse Rates Z | 591 IPM |
| Approx. Weight | 6,170 LBS |
| Steady Rest Size | Not specified |
| Main Spindle Nose | Not specified |
| Distance Between Spindle | 11.02" |
| X - Axis Thrust | Not specified |
| Saddle | Not specified |
| Sub-Spindle Speeds | Not specified |
| Additional Equipment | Not specified |
| Milling Spindle HP | Not specified |
| Turret 1 | 12 |
| Main Spindle Motor | Not specified |
| Max Bar Capacity Sub Spindle | Not specified |
| X - Axis Travel Lower | Not specified |
| Hole Thru Spindle | Not specified |
| # Tool Positions | 12 |
| Zb Travel | Not specified |
| Rapid Traverse Speeds X-Axis | 591 IPM |
| Milling Speed Upper / Lower | Not specified |
| Lower Turret Positions | Not specified |
| Max Turning Dia. Lower | 11.8" |
| Axis Movement | X, Z |
| Live Tooling Motor | Not specified |
| Turret Type L | Not specified |
| Turret Configuration 2 | Not specified |
| Construction | Heavy Duty Slant Bed |
| Second | Not specified |
| Dimensions & Weight | 76" x 67", 67" |
| Approximate Dimensions | 76" x 67" |
| Number Of Rotating Tools | Not specified |
| Engine Power | Not specified |
| Ways | Not specified |
| Sub-Spindle Travel | Not specified |
| Max. Bar Capacity | 2" |
| Spindle HP Power | 10 HP |
| Spindle Attachment Type | Not specified |
| Number Of Tool Stations | Not specified |
| Age (Circa) | 2008 |
| X Rapid Feed Rate | 591 IPM |
| Spindle Motor | 10 HP |
| Rapid Traverse Rates | Y1: Not specified, Y2: Not specified, Y3: Not specified |
| Longitudinal Travel (Z Axis) Upper Turret | 12.6" |
| Spindle Bore - Left & Right | 2.36" |
| B-Axis Travel (Sub-Spindle) | Not specified |
| Tool Shank Size | Not specified |
| X-Axis | 6.1" |
| Tail Stock Taper | Programmable |
| Indexing | Included |
| C - Axis Travel 1 | Included, 2: Included |
| Rotation Speed | 133 - 6,000 RPM |
| Max Diameter Bar Capacity | 2" |
| Rotary Tool Positions | 10 HP |
| Number Of Spindles | 1 |
| Arrival Date | Not specified |
| Electrical Power | 220/3/60 |
| Frequency | Not specified |
| X-Axis Travel (Lower Slide) | Not specified |
| Max Turning Diameter Upper Turret | Not specified |
| Feed Range (Infinit | Not specified |
Do you have a Okuma ES-L6 to sell?
<p>We are actively seeking a 2008 Okuma ES-L6 CNC Machine. This robust metal cutting machine is designed for precision and efficiency, featuring a maximum swing over bed of 17.72 inches and a maximum turning diameter of 11.8 inches. With a maximum turning length of 11 inches, the ES-L6 is ideal for a variety of machining applications, ensuring high-quality results for your production needs.</p> <p>The Okuma ES-L6 boasts impressive specifications that enhance its performance. With a cross travel (X-axis) of 6.10 inches and longitudinal travel (Z-axis) of 12.6 inches, this machine provides ample workspace for complex projects.
The spindle speed range of 133 to 6000 RPM, powered by a 10 HP spindle drive motor, allows for versatile machining capabilities. Additionally, the machine features a turret with 12 positions, facilitating quick tool changes and maximizing productivity. Weighing approximately 6170 lbs and measuring 76 x 67 inches, the ES-L6 is a solid addition to any workshop.</p> <p>Sellers often part with machines like the Okuma ES-L6 due to various reasons such as upgrading to newer technology, downsizing operations, or facility closures. As businesses evolve, they may find that their existing equipment no longer meets their production demands or space requirements.
At Superior Machine Tools, we are dedicated to buying machines nationwide, helping sellers transition smoothly while ensuring they receive fair value for their equipment.</p> <p>We offer fast payments and handle all logistics, making the selling process as seamless as possible. If you have a 2008 Okuma ES-L6 or similar CNC machine that you are looking to sell, we invite you to reach out to us today. Our team is ready to assist you and provide a hassle-free experience in selling your machinery.</p>
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.