Brother TC-R2B

What the maker publishes about the current Brother TC-R2B

On the TC-R2B, a CNC tapping center from Brother, the column traverses while the work sits on a two-face table, and Brother's page now files the model under discontinued products. Strokes come to 420 mm across X, 320 mm across Y and 305 mm down Z. Two spindle versions are listed, one reaching 10,000 min-1 and one 16,000 min-1, and the magazine carries 14 tools. All three axes rapid at 50 m/min. Brother ties the QT table to nonstop machining, and says both the jig areas and the weight the table takes were increased. Control comes from Brother's own NC unit, developed together with the machine itself.

Source: Brother Industries, Ltd., October 27, 2026.

Brother TC-R2B specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What to check on a Brother TC-R2B

• Control generation. The manufacturer specifies Brother's original NC controller for this model. Units we have tracked run 2010 to 2012; an early one may carry an older control or a retrofit.
• Spindle. The manufacturer gives a spindle speed of 10,000 / 16,000 min-1 (two spindle versions). Run the spindle to top speed and listen for bearing noise.
• Axes and way covers. The manufacturer gives X 420 mm, Y 320 mm and Z 305 mm of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 50 x 50 x 50 m/min. Measure the backlash on each axis.
• Tool changer. The manufacturer gives the tool capacity as 14. Cycle every pocket and watch for a hesitation.
• Rigging and floor. The manufacturer gives a floor space of 1,456 x 2,644 mm. Confirm the rigging route and the floor will take that.

Brother TC-R2B control

• Control Brother's original NC controller

Brother TC-R2B listing history

Where it was listed

Sellers also filed it under CNC Vertical Machining Centers (VMC) (1).

Model years seen

2012 ×2, 2010.

What Brother TC-R2B listings agree on

What affects the value of a used Brother TC-R2B

• Control. The manufacturer specifies Brother's original NC controller.
• Build year. The units we tracked were built from 2010 to 2012, across 2 model years, most often 2012 (2 units).
• Against the published figures. The manufacturer gives max spindle speed 10,000 / 16,000 min-1 (two spindle versions), tool capacity 14, X-axis travel 420 mm and Y-axis travel 320 mm.

Looking for a Brother TC-R2B for sale?

We have tracked 4 Brother TC-R2B listings on 3 marketplaces (machinetools.com, equipt.com and exapro.com), model years 2010 to 2012. We buy Brother TC-R2B machines and do not sell them.

2012 · 2012 · 2010

Every Brother TC-R2B we have tracked

1 more listing, no year.

The Brother TC-R2B among machining centers and mills

Browse all CNC Drilling & Tapping Centers, or see every Brother machine we track.

Related CNC Drilling & Tapping Centers models in this directory

1. Brother SPEEDIO R650X2: manufacturer specification page, fetched October 27, 2026.
2. Brother TC-R2B: manufacturer specification page, fetched October 27, 2026.