Sell your Okuma CADET 1997 today.
Okuma CADET Specifications
| Table Travels X Axis | Axis Travel X |
|---|---|
| Tool Changer Style | Automatic Tool Changer (ATC) |
| Spindle Nose To Tbl Surface | Spindle Nose To Table |
| X-Axis Feed Rate | X-Axis Feed Rate |
| Feed Rates | Cutting Feed Rate |
| All Axes | Axes |
| Rapid Traverse Rate (X,Y) | Rapid Traverse Rate X,Y |
| C-Axis | C Axis |
| Number Of Axis | Number Of Axis |
| Table Length | Table Length |
| Axis Travels | Axis Travel X |
| Axis Control | Axis Control |
| Length Between Centers | Distance Between Columns |
| Max Tool Weight | Max Tool Weight |
| Tool Capacity | Tool Capacity |
| Special Features | Features |
| Tool Diameter | Tool Dia. |
| Sell Your Used Equipment | Purchase Invoice |
| Palette Length | Palette Length |
| Air Requirement | Air Requirement |
| Tool Changing Time | Tool Change |
| Max Load | Max Load |
| Y-Axis (Cross Travel) | Y Axis Travel |
| Z – Axis Travel | Z-Axis Travel |
| Max Speed | Max Spindle Speed |
| Gear Head Spindle | Spindle Drive |
| Distance Between Columns | Width Between Columns |
| Jog Feed Rate | Jog Feed Rate |
| Y-Axis Movement | Y Axis Travel |
| X-Axis Rapid Traverse Rate | X-Axis Rapid Traverse Rate |
| Speed Range | Speed |
| Tool Taper | Tool Taper |
| Cutting Feedrate X/Y/Z Axis | Cutting Feedrate X/Y/Z Axis |
| Turning | Turning |
| Tool Stations | Tool Magazine |
| Tool Shank | Tool Holder |
| Automation Capability | Automation Capability |
| Additional Axis | Additional Axis |
| Apc | Apc |
| Additional Equipment | Additional Equipment |
| Coolant | Coolant |
| Automatic Tool Changer (Atc) | Automatic Tool Changer (ATC) |
| Outer Width | Outer Width |
| Spindle Center To Pallet Top | Spindle Center To Pallet Top |
| Pallet Top Surface To Floor Height | Pallet Top To Floor Height |
| Above The Bed | Above The Bed |
| Spindle Nose To Pallet Top | Spindle Nose To Pallet Top |
| Coolant Tank | Coolant Tank |
| Rapid Traverse (A/B Axis) | Rapid Traverse (A/B Axis) |
| Head (Z Axis) | Head (Z Axis) |
| Table Dimensions | Table Size-L |
| Shipping Dimensions | Shipping Dimensions |
| Distance From Spindle To Table | Spindle Nose To Table |
| Min-Max | Min-Max |
| C Axis Table Rotate | C Axis Table Rotate |
| Thru Spindle Coolant Pump | Coolant Through Spindle |
| Motor Power | Main Motor |
| Approximate Machine Weight | Approx. Weight |
| Rapid Traverse | Rapid Traverse |
| Z-Axis | Z-Axis |
| Number Of Tables | Number Of Tables |
| Dimenisons (Lxwxh) | Approximate Dimensions |
| Max. Tool Length | Max. Tool Length |
| Rapid Traverse Rate Y | Rapid Traverse Rate Y |
| X & Y Rapid Traverse | Rapid Traverse Rate X,Y |
| Travel | Travel |
| Y-Axis | Y Axis |
| Table Pallet Size | Table Capacity |
| Spindle End To Table Surface | Spindle Nose To Table |
| Y-Axis Feed Rate | Y-Axis Feed Rate |
| Rapid Traverse (X/Y Axis) | Rapid Traverse (X/Y Axis) |
| Z-Axis Ballscrew Dia./Pitch | Z Axis Feed |
| Saddle (Y Axis) | Saddle (Y Axis) |
| Apc Motor | Apc Motor |
| X-Y | X-Y |
| Maximum Tool Diameter | Max Tool Diameter |
| Spindle Torque | Spindle Torque |
| X-Axis Travel | X-Axis Travel |
| Main Motor | Main Motor |
| Table Index | Table Index |
| Maximum Turning Diameter | Max Turning Diameter |
| A-Axis Travel | A-Axis Travel |
| Workpiece Height | Workpiece Height |
| Weight On Table | Table Load |
| Item Details | Item Details |
| Max. Part Weight | Max. Part Weight |
| Approx. Weight | Approx. Weight |
| X, Y, Z Axis Thrusts | Axis Capability |
| Spindle Power | Spindle Power |
| Automatic Tool Changer Capacity (Atc) | Automatic Tool Changer Capacity (ATC) |
| Additional Machine Specs | Additional Features |
| Max. Tool Diameter | Max. Tool Diameter |
| X – Axis Travel | X – Axis Travel |
| Rapid Traverse Z | Rapid Traverse Z |
| Max. Tool Length/Weight | Max. Tool Length / Weight |
| Main Motor HP | Main Motor HP |
| Auto Mode (Z Axis) | Auto Mode (Z Axis) |
| Max Spindle Speed | Max Spindle Speed |
| Rapid X,Y & Z | Rapid Traverse |
| Z-Axis Rapid Traverse | Z-Axis Rapid Traverse |
| Live Milling Thru Spindle Coolant | Live Tooling Milling |
| Max Clearance Tabletop To Spindle Nose | Max Clearance Tabletop To Spindle Nose |
| Rapid Feedrate | Rapid Feedrate |
| Rapid Traverse X, Y, Z | Rapid Traverse |
| X - Axis Travel | X - Axis Travel |
| Load Capacity | Max. Table Load |
| # Tables | Number Of Tables |
| # Of Axis | Number Of Axis |
| Machine Size | Machine Dimensions |
| Control Options | Axis Control |
| Max Output | Max Output |
| Z Axis Rapid Traverse | Z Axis Rapid Traverse |
| Distance Floor To Table Top | Distance Floor To Table Top |
| # Poles | # Poles |
| Plate Diameter | Plate Diameter |
| Automatic Tool Changer | Automatic Tool Changer |
| First Hand | First Hand |
| Max Tool Length | Max Tool Length |
| Spindle Taper Hole | Spindle Taper Hole |
| Rapid Traverse X, Z, Y | Rapid Traverse |
| Turret Tools | Turret |
| Spindle Center Height From Floor | Spindle Center Height From Floor |
| Current | Current |
| Live Tooling Milling | Live Tooling Milling |
| Workholding | Workholding |
| Max Turning Dia | Max Turning Diameter |
| Tool Magazine | Tool Magazine |
| Approx. Dimensions | Approximate Dimensions |
| Rapid Traverse Rate | Rapid Traverse Rate |
| Pallet Top To Spindle Center | Pallet Top To Spindle Center |
| Hydraulic Unit Dimensions | Hydraulic Unit Dimensions |
| B Axis Table Tilt | B Axis Table Tilt |
| Travel X-Axis | Axis Travel X |
| Number Of Atc Positions | Number Of Atc Positions |
| Magazine Capacity | Magazine Capacity |
| Axis Z | Z-Axis |
| Y Travel | Y Axis Travel |
| Maximum Part Diameter | Maximum Part Diameter |
| Max. Spindle Speed | Max Spindle Speed |
| Pallet Type | Pallet Type |
| HP | Main Motor HP |
| Width Between Columns | Width Between Columns |
| Gantry Load Stations | Gantry Load Stations |
| Type | Type |
| Pallet Change Time | Pallet Change Time |
| A-Axis | A-Axis |
| Table Working Surface | Table Working Surface |
| Table Load | Table Load |
| Gearbox | Gearbox |
| Rotary Table Trunnion | Rotary Table Trunnion |
| Rotary Table Size | Rotary Table Size |
| Voltage | Voltage |
| Pallet Size | Pallet Size |
| Rapid Traverse Rate B | Rapid Traverse Rate B |
| Speed | Speed |
| Laser Power | Laser Power |
| Axis Capability | Axis Capability |
| Horsepower | Main Motor HP |
| Rapid Rate Z Axis | Rapid Traverse |
| No. Of Pallets | Number Of Tables |
| Y Axis Travel | Y Axis Travel |
| Spindle Motor HP | Spindle Power |
| Throat Distance | Throat Distance |
| Length X Width X Height | Approximate Dimensions |
| Max Cutting Length | Max Cutting Length |
| Spindle Nose To Table (Min.- Max.) | Spindle Nose To Tbl Surface |
| Machine Dimensions | Machine Dimensions |
| X And Y Feed Rates | X And Y Feed Rates |
| Cross" Y | Y Axis Travel |
| Quill Diameter | Quill Diameter |
| Table Load Capacity | Table Load |
| Chip Conveyor | Chip Conveyor |
| Rapid Traverse X-Axis | Rapid Traverse X-Axis |
| X Axis Travel | X Axis Travel |
| Table Capacity | Table Capacity |
| Rapid Traverse Rate (All Axes) | Rapid Traverse Rate (All Axes) |
| Axis Travel X | Axis Travel X |
| Laser Type | Laser Type |
| Max Spindle Speeds | Max Spindle Speed |
| Dynamic Fixture Offset | Dynamic Fixture Offset |
| Rapid Traverse X | Rapid Traverse X |
| Y Axis | Y Axis |
| X Travel | X Travel |
| Floor Space (W X D) | Floor Space |
| Precision And Accuracy | Precision And Accuracy |
| Rapid X Rate | Rapid Traverse |
| Efficiency | Efficiency |
| RPM | RPM |
| X-Axis Movement | X-Axis Movement |
| Bore-Thru | Bore-Thru |
| Max. Tool Length / Weight | Max. Tool Length / Weight |
| X-Axis | X-Axis |
| Spindle Nose Diameter | Spindle Nose Diameter |
| Palette Width | Palette Width |
| W - Axis Travel | W Axis Travel |
| Rapid Y Rate | Rapid Traverse Rate Y |
| Tool Change | Tool Change |
| Auto Mode (X And Y Axes) | Auto Mode (X And Y Axes) |
| Floor Space | Floor Space |
| Air Required | Air Requirement |
| Table Longitudinal Travel | Table Travels X Axis |
| Pallet Load Capacity | Max. Table Load |
| Max. Table Load | Max. Table Load |
| 4Th Axis | 4Th Axis |
| Longitudinal" X | Table Travels X Axis |
| Rapid Traverse Rate X | Rapid Traverse Rate X |
| Z Axis Feed | Z Axis Feed |
Do you have a Okuma CADET to sell?
We are actively seeking a 1997 Okuma CADET for our growing inventory of pre-owned metal cutting equipment. Superior Machine Tools purchases CNC machinery directly from sellers across the United States, and Okuma models like the CADET are exactly the kind of well-maintained equipment our buyers are looking for. Selling a used Okuma CADET doesn't have to be complicated. We pay fair market value based on current demand for Okuma metal cutting equipment, and we close transactions quickly — often within days of an initial inquiry.
There is no need to coordinate buyers, list on multiple marketplaces, or negotiate piecemeal. We make a single offer that reflects the current value of your machine. Once an offer is accepted, our logistics team handles the rest. We arrange professional rigging and removal, manage all transportation, and ensure the Okuma CADET is moved off your floor with minimal disruption to your operations.
Whether you are upgrading to newer equipment, consolidating a facility, or liquidating an entire shop, we have the experience to make the process simple. If you have a 1997 Okuma CADET you are considering selling, contact Superior Machine Tools today for a fast, no-obligation quote. We respond promptly, pay competitively, and remove the equipment on a timeline that works for you.
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.