Haas VS-3

What the maker publishes about the current Haas VS-3

Haas groups the VS-3 with its Extra-Large VMCs: a bed-style vertical mill, 3-axis, with a 50-taper spindle. Travel along X is 150.00 in; Y and Z both travel 50.00 in. Its 153.0 in by 49.0 in table takes 10000 lb distributed evenly. Three blank tooling plates form its standard surface, and a T-slot table may replace them. Through its 2-speed gearbox the spindle turns up to 7500 rpm at a rated 30.0 hp, and maximum torque is 340.0 ft-lbf at 700 rpm. CT 50 or BT 50 holders fit the taper. Its side-mount tool storage has 50+1 places for tools of 30.0 lb at most and 16.00 in long at most; tool-to-tool time averages 6.00 s, chip to chip 15.00 s. Rapids on Y and Z run 600 ipm, while X rapids and cutting feed are 360 ipm. Ballscrews are 50 mm on every axis.

Source: Haas Automation, October 26, 2026.

What the Haas VS-3 is used for

Haas describes the VS-3 as a large, bed style vertical mill with long travels for heavy cutting, and says its fully supported X axis carries parts up to 10,000 lb.

Source: Haas Automation, October 26, 2026.

Haas VS-3 listing history

Where it was listed

Model years seen

2022 ×2, 2012, 2011 ×3, 2009 ×2.

What Haas VS-3 listings agree on

Looking for a Haas VS-3 for sale?

We have tracked 10 Haas VS-3 listings on 6 marketplaces (equipt.com, quickmachinerysales.com, cncmachines.com, machnet.com, revelationmachinery.com and surplusrecord.com), model years 2009 to 2022. We buy Haas VS-3 machines and do not sell them.

2022 · 2022 · 2012 · 2011 · 2011 · 2011 · 2009 · 2009

Every Haas VS-3 we have tracked

2 more listings, no year.

The Haas VS-3 among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Haas machine we track.

Other CNC Vertical Machining Centers (VMC) models in this directory