2019 Haas DT-1
Metal Cutting
CNC Drilling & Tapping Centers
Haas DT-1
37 Haas DT-1 listings have come through the used market we track: 7 marketplaces, built 2010–2019 where given; 33 machines once repeats are merged.
20 inX-axis travel
16 inY-axis travel
15.5 inZ-axis travel
15 hpSpindle power
What the maker publishes about the current Haas DT-1
Drilling and tapping come first on the Haas DT-1, a compact machine in the Drill/Tap/Mill Series that also mills. A BT30 spindle with inline direct drive reaches 10000 rpm and 15.0 hp, and rigid tapping runs at up to 5000 rpm. Torque peaks at 46.0 ft-lbf at 1700 rpm. The 20+1 tool changer averages 1.75 s tool to tool and 2.00 s chip to chip. Each tool may measure up to 2.0 in across, 7.00 in long and 5.5 lb. Rapids of 2400 ipm apply on X, Y and Z, and feeds cut at up to 1200 ipm. Travel is 20.00 in by 16.00 in by 15.50 in. On the 26.0 in by 15.0 in table, the load limit is 250 lb at full rapid rates or 500 lb when rapids drop to 50%. The spindle nose sits 6.0 in to 21.5 in from the table.
Source: Haas Automation, Inc., September 27, 2026.
What the Haas DT-1 is used for
Haas makes the DT-1 a compact drill and tap machine on BT30 tooling that also mills, with a 10,000 rpm spindle for rigid tapping, a 20-pocket tool changer and 2400 ipm rapids to cut the time spent between cuts.
Source: Haas Automation, Inc., October 27, 2026.
Haas DT-1 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX Axis
508 mm (20.00 in)
Y-axis travelY Axis
406 mm (16.00 in)
Z-axis travelZ Axis
394 mm (15.50 in)
Spindle and speed
Max spindle speedMax Speed
10000 rpm
Spindle motor powerMax Rating
11.2 kW (15.0 hp)
Spindle taperTaper
BT30
Rapid traverseRapids on X
61.0 m/min (2400 ipm)
Rapid traverseRapids on Y
61.0 m/min (2400 ipm)
Rapid traverseRapids on Z
61.0 m/min (2400 ipm)
Table, turret and tools
Tool capacityCapacity
20+1
Further figures the manufacturer publishes
Spindle nose to table (max, approx.)
546 mm (21.5 in)
Spindle nose to table (min, approx.)
152 mm (6.0 in)
Spindle max torque
62.0 Nm @ 1700 rpm (46.0 ft-lbf @ 1700 rpm)
Spindle drive system
Inline Direct-Drive
Spindle bearing lubrication
Air / Oil Injection
Spindle cooling
Air Cooled
Table length
660 mm (26.0 in)
Table width
381 mm (15.0 in)
T-slot width
15.90 mm to 16.00 mm (0.626 in to 0.630 in)
T-slot center distance
125 mm (4.92 in)
Number of standard T-slots
3
Max weight on table at 100% rapids (evenly dist.)
113.4 kg (250 lb)
Max weight on table at 50% rapids (evenly dist.)
226.8 kg (500 lb)
Max cutting feedrate
30.5 m/min (1200 ipm)
Tool changer type
SMTC
Max tool length (from gage line)
178 mm (7.00 in)
Max tool weight
2.5 kg (5.5 lb)
Tool-to-tool time (avg)
1.75 s
Chip-to-chip time (avg)
2.00 s
Max tapping speed
5000 rpm
Shipping weight
2336.0 kg (5150 lb)
- manufacturer specification page, fetched October 14, 2026.
What fits a Haas DT-1
Each of these follows from a published specification above, which is named beside it.
30-taper toolholders
This is a 30-taper spindle — the 7:24 steep taper that CAT-30, BT-30 and DIN 69871 (SK-30) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed. The manufacturer names BT (JIS/MAS 403) for this machine.
Derived from Spindle taper: BT30
Haas DT-1 equipment and options
Standard on a new Haas DT-1
- Rigid tapping
Optional on a new Haas DT-1
- Through-spindle coolant
- Rotary table (4th axis)
- Robot or automatic loader
Source: Haas Automation, October 14, 2026.
What to check on a Haas DT-1
- Spindle. The manufacturer gives a spindle speed of 10000 rpm. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 11.2 kW (15.0 hp) of spindle power and 62.0 Nm @ 1700 rpm (46.0 ft-lbf @ 1700 rpm) of spindle torque. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of BT30. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 508 mm (20.00 in), Y 406 mm (16.00 in) and Z 394 mm (15.50 in) of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 61.0 m/min (2400 ipm). Measure the backlash on each axis.
- Tool changer. The manufacturer gives the tool capacity as 20+1. Cycle every pocket and watch for a hesitation.
- Tool-change time. The manufacturer gives a tool-to-tool time of 1.75 s and a chip-to-chip time of 2.00 s. Time a tool change against that.
Haas DT-1 listing history
Where it was listed
equipt.com
13 listings, 2010–2018
machinetools.com
8 listings, 2010–2018
surplusrecord.com
7 listings, 2010–2015
cncmachines.com
5 listings, 2010–2015
revelationmachinery.com
2 listings, 2011–2019
machinestation.us
1 listing
usedcnc.com
1 listing, 2014
Filed under CNC Drilling & Tapping Centers (12) and CNC Vertical Machining Centers (VMC) (1).
Model years seen
2019, 2018 ×2, 2016, 2015 ×4, 2014 ×4, 2013 ×5, 2012 ×6, 2011 ×7, 2010 ×5.
What Haas DT-1 listings agree on
X-axis travel
20 in
Y-axis travel
16 in
Z-axis travel
15.5 in
Table size
26 x 15 in
Spindle speed
12,000 RPM
Spindle power
15 hp
Spindle taper
BT 30
Tool capacity
20
Control
CNC (HAAS)
What affects the value of a used Haas DT-1
- Build year. The units we tracked were built from 2010 to 2019, across 9 model years, most often 2011 (7 units).
- Against the published figures. The manufacturer gives max spindle speed 10000 rpm, spindle motor power 11.2 kW (15.0 hp), tool capacity 20+1 and X-axis travel 508 mm (20.00 in).
Looking for a Haas DT-1 for sale?
We have tracked 37 Haas DT-1 listings on 7 marketplaces (equipt.com, machinetools.com, surplusrecord.com, cncmachines.com, revelationmachinery.com, machinestation.us and usedcnc.com), model years 2010 to 2019. We buy Haas DT-1 machines and do not sell them.
2019 · 2018 · 2018 · 2016 · 2015 · 2015 · 2015 · 2015 · 2014 · 2014 · 2014 · 2014 · 2013 · 2013 · 2013 · 2013 · 2012 · 2012 · 2012 · 2012 · 2012 · 2012 · 2011 · 2011 · 2011 · 2011 · 2011 · 2010 · 2010 · 2010 · 2010
Every Haas DT-1 we have tracked
2018 Haas DT-1
Metal Cutting
2018 Haas DT-1
2016 Haas DT-1
2015 Haas DT-1
Metal Cutting
2015 Haas DT-1
The spindle taper is BT-30, which is compatible with a wide array of tooling options.
2015 Haas DT-1
Metal Cutting
2015 Haas DT-1
Metal Cutting
2014 Haas DT-1
Metal Cutting
2014 Haas DT-1
2014 Haas DT-1
Metal Cutting
2014 Haas DT-1
Metal Cutting
2013 Haas DT-1
2 listings (equipt.com)
2013 Haas DT-1
Metal Cutting
2013 Haas DT-1
Metal Cutting
2013 Haas DT-1
Metal Cutting
2012 Haas DT-1
2012 Haas DT-1
Metal Cutting
2012 Haas DT-1
Metal Cutting
2012 Haas DT-1
2012 Haas DT-1
Metal Cutting
2012 Haas DT-1
Metal Cutting
2011 Haas DT-1
3 listings (equipt.com)
2011 Haas DT-1
Metal Cutting
7 more Haas DT-1 machines
2011 Haas DT-1
Used
2011 Haas DT-1
Used
2011 Haas DT-1
Used
2010 Haas DT-1
Used
2010 Haas DT-1
Used
2010 Haas DT-1
Used
2010 Haas DT-1
Used
2 more listings, no year.
The Haas DT-1 among machining centers and mills
Browse all CNC Drilling & Tapping Centers, or see every Haas machine we track.
Models related to the Haas DT-1
Haas DT-2
Same series
Other machining centers and mills in this directory
Haas VF-1
- Units tracked
- 83
- Years seen
- 1990–2026
- Max spindle speed
- 8100 rpm1this model: 10000 rpm2
- Spindle motor power
- 22.4 kW (30.0 hp)1this model: 11.2 kW (15.0 hp)2
Haas TM-1
- Units tracked
- 77
- Years seen
- 2001–2020
Haas TM-1P
- Units tracked
- 57
- Years seen
- 1999–2023
- X-axis travel
- 762 mm (30.00 in)3this model: 508 mm (20.00 in)2
- Max spindle speed
- 6000 rpm3this model: 10000 rpm2
Fanuc ROBODRILL D21LIB5
- Units tracked
- 19
- Years seen
- 2017–2021
Brother TC-32BN QT
- Units tracked
- 10
- Years seen
- 2007–2016
- X-axis travel
- 550 mm4this model: 508 mm (20.00 in)2
- Max spindle speed
- 12,000 min-1 (16,000 min-1 optional)4this model: 10000 rpm2
Brother TC-S2A
- Units tracked
- 8
- Years seen
- 1999–2008
- Haas VF-1: manufacturer specification page, fetched October 14, 2026.
- Haas DT-1: manufacturer specification page, fetched October 14, 2026.
- Haas TM-1P: manufacturer specification page, fetched October 14, 2026.
- Brother TC-32BN QT: manufacturer specification page, fetched October 27, 2026.
Have a Haas DT-1 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
