2023 Haas TM-1P
Metal Cutting
CNC Vertical Machining Centers (VMC)
Haas TM-1P
57 Haas TM-1P listings have come through the used market we track: 9 marketplaces, built 1999–2023 where given; 54 machines once repeats are merged.
30 inX-axis travel
12 inY-axis travel
16 inZ-axis travel
7.5 hpSpindle power
What the maker publishes about the current Haas TM-1P
Haas groups the TM-1P in its TM-P Series, the toolroom mills that carry a carousel changer with 10 pockets, and it is a three-axis model with 30.00 in of X travel. Y and Z each travel 16.00 in. The spindle runs up to 6000 rpm through a belt drive, rated at 7.5 hp. Torque reaches 33.0 ft-lbf when the spindle turns 1200 rpm. Holders are 40-taper, of CT or BT type. Pocket limits on the carousel are 3.5 in of diameter and 12.0 lb per tool. Average tool change time is 5.70 s, and chip to chip it is 6.50 s. All three axes rapid at 400 ipm, which is also the maximum cutting feed. The table is 47.8 in by 10.5 in, carries 3 T-slots, and holds 350 lb. The spindle nose can be as low as 4.0 in or as high as 20.0 in over the table. Supply may be single- or three-phase, though Europe has no single-phase version.
Source: Haas Automation, September 27, 2026.
What the Haas TM-1P is used for
Haas points the TM-1P at schools, at companies taking their first step into CNC and at parts that need long travels; it says the mill can be run without knowing G-code, and it lists a conversational programming system.
Source: Haas Automation, October 14, 2026.
Haas TM-1P specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX Axis
762 mm (30.00 in)1
Y-axis travelY Axis
406 mm (16.00 in)1
Z-axis travelZ Axis
406 mm (16.00 in)1
Spindle and speed
Max spindle speedMax Speed
6000 rpm1
Spindle motor powerMax Rating
5.6 kW (7.5 hp)1
Spindle taperTaper
CT or BT 401
Rapid traverseRapids on X
10.2 m/min (400 ipm)1
Rapid traverseRapids on Y
10.2 m/min (400 ipm)1
Rapid traverseRapids on Z
10.2 m/min (400 ipm)1
Table, turret and tools
Max table loadMax Weight on Table (evenly distributed)
159 kg (350 lb)1
Tool capacityCapacity
101
Further figures the manufacturer publishes
Spindle nose to table (max, approx.)
508 mm (20.0 in)1
Spindle nose to table (min, approx.)
102 mm (4.0 in)1
Spindle max torque
45.0 Nm @ 1200 rpm (33.0 ft-lbf @ 1200 rpm)1
Spindle drive system
Direct Speed, Belt Drive1
Spindle bearing lubrication
Grease Packed1
Spindle cooling
Air Cooled1
Table length
1213 mm (47.8 in)1
Table width
267 mm (10.5 in)1
T-slot width
15.90 mm to 16.00 mm (0.626 in to 0.630 in)1
T-slot center distance
102 mm (4.00 in)1
Number of standard T-slots
31
Max cutting feedrate
10.2 m/min (400 ipm)1
Tool changer type
Carousel1
Max tool weight
5.4 kg (12.0 lb)1
Tool-to-tool time (avg)
5.70 s1
Chip-to-chip time (avg)
6.50 s1
Shipping weight
2014.0 kg (4440 lb)1
Y travel, earlier build (2021 model guide)
12 in2the TM-1P's Y travel in Haas's 2021 US model guide, an earlier build than the current page's; a machine is one build or the other
- manufacturer specification page, fetched October 14, 2026.
- manufacturer spec sheet (PDF), fetched October 16, 2026.
What fits a Haas TM-1P
Each of these follows from a published specification above, which is named beside it.
40-taper toolholders
This is a 40-taper spindle — the 7:24 steep taper that CAT-40, BT-40 and DIN 69871 (SK-40) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed. The manufacturer names BT (JIS/MAS 403) for this machine.
Derived from Spindle taper: CT or BT 40
What to check on a Haas TM-1P
- Spindle. The manufacturer gives a spindle speed of 6000 rpm. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 5.6 kW (7.5 hp) of spindle power and 45.0 Nm @ 1200 rpm (33.0 ft-lbf @ 1200 rpm) of spindle torque. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of CT or BT 40. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 762 mm (30.00 in), Y 406 mm (16.00 in) and Z 406 mm (16.00 in) of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 10.2 m/min (400 ipm). Measure the backlash on each axis.
- Tool changer. The manufacturer gives the tool capacity as 10. Cycle every pocket and watch for a hesitation.
- Tool-change time. The manufacturer gives a tool-to-tool time of 5.70 s and a chip-to-chip time of 6.50 s. Time a tool change against that.
- Table. The manufacturer gives a table load of 159 kg (350 lb). Check the table and its T-slots for damage.
Haas TM-1P listing history
Where it was listed
equipt.com
16 listings, 1999–2023
machinetools.com
10 listings, 1999–2023
revelationmachinery.com
9 listings, 2007–2021
cncmachines.com
8 listings, 2008–2023
surplusrecord.com
7 listings, 2009–2021
theequipmenthub.com
3 listings, 2012–2019
usedcnc.com
2 listings, 2013–2020
generationmachinetools.com
1 listing, 2016
premierequipment.com
1 listing, 2021
Filed under CNC Vertical Machining Centers (VMC) (16).
Model years seen
2023 ×3, 2021 ×4, 2020 ×5, 2019 ×8, 2018 ×5, 2017 ×3, 2016 ×2, 2014 ×4, 2013, 2012 ×7, 2011 ×2, 2010, 2009 ×3, 2008 ×2, 2007, 2006 ×2, 2005, 1999 ×2.
What Haas TM-1P listings agree on
X-axis travel
30 in
Y-axis travel
12 in
Z-axis travel
16 in
Table size
47.75 x 10.5 in
Spindle speed
6,000 RPM
Spindle power
7.5 hp
Spindle taper
CAT 40
Tool capacity
10 (9 machines); 20 (2 machines)
Control
Haas
What affects the value of a used Haas TM-1P
- Options. The units we tracked split on tool capacity (10 on 9 machines, 20 on 2 machines).
- Build year. The units we tracked were built from 1999 to 2023, across 18 model years, most often 2019 (8 units).
- Against the published figures. The manufacturer gives max spindle speed 6000 rpm, spindle motor power 5.6 kW (7.5 hp), tool capacity 10 and X-axis travel 762 mm (30.00 in).
Looking for a Haas TM-1P for sale?
We have tracked 57 Haas TM-1P listings on 9 marketplaces (equipt.com, machinetools.com, revelationmachinery.com, cncmachines.com, surplusrecord.com, theequipmenthub.com, usedcnc.com, generationmachinetools.com and premierequipment.com), model years 1999 to 2023. We buy Haas TM-1P machines and do not sell them.
2023 · 2023 · 2023 · 2021 · 2021 · 2021 · 2021 · 2020 · 2020 · 2020 · 2020 · 2020 · 2019 · 2019 · 2019 · 2019 · 2019 · 2019 · 2019 · 2018 · 2018 · 2018 · 2018 · 2017 · 2017 · 2017 · 2016 · 2016 · 2014 · 2014 · 2014 · 2014 · 2013 · 2012 · 2012 · 2012 · 2012 · 2012 · 2012 · 2011 · 2011 · 2010 · 2009 · 2009 · 2009 · 2008 · 2008 · 2007 · 2006 · 2006 · 2005 · 1999 · 1999
Every Haas TM-1P we have tracked
2023 Haas TM-1P
Tool capacity
20
2023 Haas TM-1P
Metal Cutting
2021 Haas TM-1P
Metal Cutting
2021 Haas TM-1P
Metal Cutting
2021 Haas TM-1P
Metal Cutting
2021 Haas TM-1P
Metal Cutting
2020 Haas TM-1P
Tool capacity
20
2020 Haas TM-1P
Metal Cutting
2020 Haas TM-1P
Tool capacity
10
2020 Haas TM-1P
Metal Cutting
2020 Haas TM-1P
Metal Cutting
2019 Haas TM-1P
Metal Cutting
2019 Haas TM-1P
Metal Cutting
2019 Haas TM-1P
Metal Cutting
2019 Haas TM-1P
2 listings (equipt.com)
Tool capacity
10
2019 Haas TM-1P
Metal Cutting
2019 Haas TM-1P
Metal Cutting
2019 Haas TM-1P
Metal Cutting
2018 Haas TM-1P
2 listings (equipt.com)
Tool capacity
10
2018 Haas TM-1P
Metal Cutting
2018 Haas TM-1P
Metal Cutting
2018 Haas TM-1P
Metal Cutting
2017 Haas TM-1P
Metal Cutting
29 more Haas TM-1P machines
2017 Haas TM-1P
Used
2017 Haas TM-1P
Used
2016 Haas TM-1P
Tool capacity 10
2016 Haas TM-1P
Used
2014 Haas TM-1P
Tool capacity 10
2014 Haas TM-1P
Used
2014 Haas TM-1P
Used
2014 Haas TM-1P
Used
2013 Haas TM-1P
Used
2012 Haas TM-1P
Tool capacity 10
2012 Haas TM-1P
Used
2012 Haas TM-1P
Used
2012 Haas TM-1P
Used
2012 Haas TM-1P
Used
2012 Haas TM-1P
Used
2011 Haas TM-1P
Tool capacity 10
2011 Haas TM-1P
Used
2010 Haas TM-1P
Used
2009 Haas TM-1P
Used
2009 Haas TM-1P
Used
2009 Haas TM-1P
Used
2008 Haas TM-1P
Used
2008 Haas TM-1P
Used
2007 Haas TM-1P
Used
2006 Haas TM-1P
Used
2006 Haas TM-1P
Tool capacity 10
2005 Haas TM-1P
Used
1999 Haas TM-1P
Used
1999 Haas TM-1P
Tool capacity 10
1 more listing, no year.
The Haas TM-1P among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Haas machine we track.
Haas TM-1P variants and related models
Have a Haas TM-1P to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
