2013 Toshiba BTH-130
CNC Horizontal Machining Centers (HMC)
CNC Horizontal Machining Centers (HMC)
Toshiba BTH-130
4 Toshiba BTH-130 listings have come through the used market we track: 2 marketplaces, built 2012–2013 where given.
What the maker publishes about the current Toshiba BTH-130
Shibaura Machine, formerly Toshiba Machine, lists the BTH-130.R24 as a horizontal boring machine with a 130 mm (5.1 in) spindle. Travel is 3,000 mm in X, 2,300 mm in Y and 1,500 mm in Z, plus a 700 mm W stroke. The table measures 2,000 by 2,400 mm (79 by 94 in) and carries 20,000 kg (44,000 lb); a hydrostatic table rated for 40,000 kg (88,000 lb) is listed as an option. The spindle turns up to 4,000 rpm, the magazine holds 60 tools, and the control is a FANUC 31i-B Plus. A high speed spindle head rated 60/50 hp and turning 6 to 4,000 rpm is listed. The B axis indexes continuously, and the page ties that to milling cylindrical and end surfaces without an independent NC rotary table. A pendant handwheel unit moves the X, Y, Z, W and B axes. Scale feedback on the X, Y and Z axes and the B axis is an option, as are a two-pallet changer rated for 15,000 kg, a Renishaw radio touch probe with a calibration block, and a Renishaw tool setting probe. The page notes that some specifications change when the pallet changer is selected.
Source: Shibaura Machine, October 14, 2026.
What the Toshiba BTH-130 is used for
Shibaura Machine aims the BTH-130.R24 at horizontal boring of large workpieces that also take machining center work in the same setup. Its table indexes on a continuous B axis, so cylindrical and end faces are cut in one cycle, and it carries loads up to 20,000 kg.
Source: Shibaura Machine, September 16, 2026.
Toshiba BTH-130 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX Stroke inch(mm)
118 in (3,000 mm)BTH-130.R24 configuration
Y-axis travelY Stroke inch(mm)
90.5 in (2,300 mm)BTH-130.R24 configuration
Z-axis travelZ Stroke inch(mm)
60 in (1,500 mm)BTH-130.R24 configuration
W-axis travelW Stroke inch(mm)
27.5 in (700 mm)BTH-130.R24 configuration
Spindle and speed
Max spindle speedSpindle (rpm)
4,000 rpm
Spindle diameterSpindle Dia. inch(mm)
5.1 in (130 mm)
Table, turret and tools
Table sizeTABLE size inch(mm) width x length
79 x 94 in (2,000 x 2,400 mm)BTH-130.R24 configuration
Max table loadMax. load lbs (kg)
44,000 lb (20,000 kg)BTH-130.R24 configuration
Tool capacityATC Tool Pod
60 tools
Control
Control
FANUC 31i-B Plus
Further figures the manufacturer publishes
Hydro-Static Table load capacity 88,000 lbs. (40,000 Kgs.) (Optional)
88,000 lb (40,000 kg) hydro-static table (OPTIONAL)
High-speed Spindle (6 ~ 4000 RPM)
AC 60/50 HP, 6 ~ 4,000 rpm (OPTIONAL head)
- manufacturer specification page, fetched September 16, 2026.
What fits a Toshiba BTH-130
Each of these follows from a published specification above, which is named beside it.
Boring bars and tooling
The spindle figure opposite sets the boring-bar class this machine works with, and it is the number a buyer of a boring mill asks for first. Bars, facing heads and angle heads are separate assets and are counted separately.
Derived from Spindle diameter: 5.1 in (130 mm)
What to check on a Toshiba BTH-130
- Control generation. The manufacturer specifies FANUC 31i-B Plus for this model. Units we have tracked run 2012 to 2013; an early one may carry an older control or a retrofit.
- Spindle. The manufacturer gives a spindle speed of 4,000 rpm. Run the spindle to top speed and listen for bearing noise.
- Tool changer. The manufacturer gives the tool capacity as 60 tools. Cycle every pocket and watch for a hesitation.
- Table. The manufacturer gives a table size of 79 x 94 in (2,000 x 2,400 mm) (BTH-130.R24 configuration) and a table load of 44,000 lb (20,000 kg) (BTH-130.R24 configuration). Check the table and its T-slots for damage.
Toshiba BTH-130 control
- Control FANUC 31i-B Plus
Toshiba BTH-130 listing history
Where it was listed
machinetools.com
3 listings, 2013
equipt.com
1 listing, 2012
Sellers also filed it under CNC Boring Mills (1) and CNC Horizontal Boring Mills (1).
Model years seen
2013, 2012.
What affects the value of a used Toshiba BTH-130
- Control. The manufacturer specifies FANUC 31i-B Plus.
- Build year. The units we tracked were built from 2012 to 2013, across 2 model years.
- Against the published figures. The manufacturer gives max spindle speed 4,000 rpm, tool capacity 60 tools, X-axis travel 118 in (3,000 mm) (BTH-130.R24 configuration) and Y-axis travel 90.5 in (2,300 mm) (BTH-130.R24 configuration).
Looking for a Toshiba BTH-130 for sale?
We have tracked 4 Toshiba BTH-130 listings on 2 marketplaces (machinetools.com and equipt.com), model years 2012 to 2013. We buy Toshiba BTH-130 machines and do not sell them.
Every Toshiba BTH-130 we have tracked
2012 Toshiba BTH-130
CNC Horizontal Machining Centers (HMC)
2 more listings, no year.
The Toshiba BTH-130 among machining centers and mills
Browse all CNC Horizontal Machining Centers (HMC), or see every Toshiba machine we track.
Models related to the Toshiba BTH-130
Toshiba BTH-110R 18
Same series
Toshiba BTH 130 R24
Variant
Have a Toshiba BTH-130 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
