Tos SN 50C

What the maker published about the Tos SN 50C

TRENS a.s. aimed its SN 50 C center lathe at one-off and small-batch turning, and its German page says repair shops can put it to work as well. Over the bed it swings 500 mm; over the slide, 270 mm; and in the gap, 700 mm across a usable gap length of 230 mm. Three bed lengths are given, 1000, 1500 and 2000 mm between centers, and the center height is 250 mm. Spindle speed spans 22 to 2000 min-1. Between centers the lathe is rated for 300 kg of work. Powered rapid traverse is fitted: 3000 mm per minute lengthwise and 1500 across, driven by a motor of its own. The cross slide stroke is 300 mm, while the tool slide moves 140 mm and takes tools up to 32 x 20 mm. A large working range and a wide choice of accessories and versions are the strengths TRENS lists.

Source: TRENS a.s., an archived copy of the maker's page from 2007, October 27, 2026.

What the Tos SN 50C is used for

TRENS gives the SN 50 C a long thread-cutting chart: 29 metric pitches from 0.5 to 40 mm, 38 Whitworth settings from 1 to 80 threads per inch, and 26 module and 31 diametral pitch settings; the spindle has a 52 mm bore, and work held from one end only may weigh up to 80 kg.

Source: TRENS a.s., an archived copy of the maker's page from 2007, October 27, 2026.

Tos SN 50C listing history

Where it was listed

Model years seen

1990.

Looking for a Tos SN 50C for sale?

We have tracked 1 Tos SN 50C listing on 1 marketplace (surplusrecord.com), model year 1990. We buy Tos SN 50C machines and do not sell them.

1990

Every Tos SN 50C we have tracked

The Tos SN 50C among lathes and turning centers

Browse all CNC Lathes, or see every Tos machine we track.

Models related to the Tos SN 50C