CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill)

Okuma MULTUS B400II-1500

2 Okuma MULTUS B400II-1500 listings have come through the used market we track: 2 marketplaces, built 2015 where given.

40 hpSpindle power

What the maker publishes about the current Okuma MULTUS B400II-1500

Okuma's MULTUS B400II joins lathe and machining center work in one machine, and the 1500 version puts 1,500 mm (59.06 in) between centers. With Y at zero it swings ø710 mm (27.95 in) over the saddle, a figure the brochure repeats for maximum machining diameter. A JIS A2-8 headstock runs from 38 to 3,800 min-1 on 22/15 kW (30/20 hp), the pair given for 50%ED and continuous duty; an A2-11 spindle reaching 2,800 min-1 on 30/22 kW is optional. Its H1 milling head covers 50 to 6,000 min-1 from 14/10 kW over 5 minutes and continuous, or 10,000 min-1 with the optional head, and takes HSK-A63 holders from a 20 tool changer. Strokes reach 690 mm on X, 230 mm on Y and 1,545 mm on Z. The NC tailstock pushes with 1.5 to 7 kN. In its 1500 form the machine stands 3,137 mm tall and needs 5,750 by 2,797 mm of floor with its tank and a hinged chip conveyor.

Source: Okuma, October 27, 2026.

What the Okuma MULTUS B400II-1500 is used for

Okuma's MULTUS B II brochure, which covers the B400II, shows a carrier, a vacuum rotor and a spiral bevel gear as sample work, and describes gear cutting on these machines through an optional gear machining add-on.

Source: Okuma, October 27, 2026.