Okuma MILLAC 852VII

What the maker published about the Okuma MILLAC 852VII

Okuma lists the MILLAC 852V II in its MILLAC-V Series of vertical machining centers. Its base and column carry ribs that Okuma places against chatter and twist, and box ways guide all three axes. Standard travels are 80.71 in on X, 33.46 in on Y and 29.53 in on Z, over an 86.61 x 33.46 in table that takes 5,511 lbs. Rapid traverse reaches 52 fpm on X, Y and Z. The standard spindle, turned through a variable speed gear head and carried in large-diameter bearings, runs from 20 to 4,000 rpm and is rated 25/20 hp. Okuma also lists optional figures in brackets: a 125.98 x 33.46 in table, X travel of 120.08 in with Y and Z unchanged, a load of 8,360 lbs, rapids of 39, 39 and 52 fpm, 35/25 hp of spindle power, and spindle ranges of 30 to 6,000, 50 to 12,000 or 50 to 15,000 rpm.

Source: Okuma, an archived copy of the maker's page from 2021, October 27, 2026.

What the Okuma MILLAC 852VII is used for

Okuma America's 2021 page aims the MILLAC 852V II at large, heavy workpieces, pointing to its long travels and a table made to carry heavy loads, with torque from a geared head for heavy cuts at low and high spindle speeds alike.

Source: Okuma, an archived copy of the maker's page from 2021, October 28, 2026.

Okuma MILLAC 852VII listing history

Where it was listed

Filed under CNC Vertical Machining Centers (VMC) (4).

Model years seen

2016 ×4, 2015, 2014.

What Okuma MILLAC 852VII listings agree on

Looking for an Okuma MILLAC 852VII for sale?

We have tracked 6 Okuma MILLAC 852VII listings on 5 marketplaces (usedcnc.com, exapro.com, machinetools.com, machnet.com and premierequipment.com), model years 2014 to 2016. We buy Okuma MILLAC 852VII machines and do not sell them.

2016 · 2016 · 2015 · 2014

Every Okuma MILLAC 852VII we have tracked

The Okuma MILLAC 852VII among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Okuma machine we track.

Models related to the Okuma MILLAC 852VII