CNC Horizontal Machining Centers (HMC)
Okuma MILLAC 800VH
12 Okuma MILLAC 800VH listings have come through the used market we track: 4 marketplaces, built 2007–2009 where given; 8 machines once repeats are merged.
40.16 inX-axis travel
40.16 inY-axis travel
40.16 inZ-axis travel
10,000 RPMSpindle speed
What the maker published about the Okuma MILLAC 800VH
The MILLAC 800VH from Okuma belongs to the MILLAC-VH Series: a multi-plane, 5-axis machining center that can finish several faces of a workpiece in one setup. Work is clamped on an 800 x 800 mm table rated for 1,000 kg. The maker prints one travel figure, 1,020 mm, against X, Y and Z together. Rapid moves on the linear axes reach 30 m/min, and the A and C axes swing at 3,600 deg/min. Spindle speeds run from 100 to 10,000 min-1, with power of 22/18.5 kW. Those numbers apply to a machine fitted with the OSP-P500 control. The frame rests on a box-type bed whose sliding surfaces are wide and rectangular, and the axes are driven by large ball screws held in pretensioned supports. The standard build includes a two-pallet changer of the rotary type. Okuma notes that cutting a part in one setup removes the setup errors that come with fixturing it again.
Source: Okuma, an archived copy of the maker's page from 2025, October 27, 2026.
What the Okuma MILLAC 800VH is used for
For multi-face parts, Okuma's 2006 page lets the MILLAC-800VH's head tilt to any angle across a 150-degree range, so a standard end mill or face mill can stand in for a ball end mill, which shortens cutting time and makes tools last longer.
Source: Okuma, an archived copy of the maker's page from 2006, October 28, 2026.
When the Okuma MILLAC 800VH was built
Okuma introduced the MILLAC-800VH no later than 2006; it appears as a five-axis MILLAC-VH model on the okuma.com page that the Internet Archive stored on October 23, 2006.
Source: Okuma, an archived copy of the maker's page from 2006, October 28, 2026.
Okuma MILLAC 800VH listing history
Where it was listed
machinetools.com
6 listings, 2007–2008
surplusrecord.com
3 listings, 2007–2008
equipt.com
2 listings, 2007–2008
exapro.com
1 listing, 2009
Filed under CNC Horizontal Machining Centers (HMC) (4), CNC Vertical Machining Centers (VMC) (4), CNC 5-Axis Machining Centers (1) and CNC Horizontal Machining Centers (1).
Model years seen
2009, 2008 ×4, 2007 ×6.
What Okuma MILLAC 800VH listings agree on
X-axis travel
40.16 in
Y-axis travel
40.16 in
Z-axis travel
40.16 in
Spindle speed
10,000 RPM
Spindle power
30 hp
Spindle taper
CAT 50
Tool capacity
80
Looking for an Okuma MILLAC 800VH for sale?
We have tracked 12 Okuma MILLAC 800VH listings on 4 marketplaces (machinetools.com, surplusrecord.com, equipt.com and exapro.com), model years 2007 to 2009. We buy Okuma MILLAC 800VH machines and do not sell them.
Every Okuma MILLAC 800VH we have tracked
2008 Okuma MILLAC 800VH
CNC 5-Axis Machining Centers · 2 listings (surplusrecord.com, machinetools.com)
2008 Okuma MILLAC 800VH (listed as MILLAC-800VH-5-AXIS)
2008 Okuma MILLAC 800VH
CNC Horizontal Machining Centers
2007 Okuma MILLAC 800VH (listed as 800 VH)
Metal Cutting
2007 Okuma MILLAC 800VH
4 listings (surplusrecord.com, machinetools.com)
2007 Okuma MILLAC 800VH (listed as MILLAC-800VH-5-AXIS)
1 more listing, no year.
The Okuma MILLAC 800VH among machining centers and mills
Browse all CNC Horizontal Machining Centers (HMC), or see every Okuma machine we track.
Models related to the Okuma MILLAC 800VH
Okuma MILLAC 852VII
Same series
Have an Okuma MILLAC 800VH to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
