2023 Okuma MB-5000HII
2 listings (equipt.com, surplusrecord.com)
CNC Horizontal Machining Centers (HMC)
Okuma MB-5000HII
7 Okuma MB-5000HII listings have come through the used market we track: 4 marketplaces, built 2020–2023; 4 machines once repeats are merged.
29.92 inX-axis travel
29.92 inY-axis travel
15,000 RPMSpindle speed
31.89 inZ-axis travel
What the maker publishes about the current Okuma MB-5000HII
In Okuma's MB-H Series of horizontal machining centers, the MB-5000HII sits with the MB-4000H and MB-10000H. Parts are held on a 500 x 500 mm rotary pallet, and X, Y and Z strokes of 760, 760 and 810 mm match the 760 x 760 x 810 mm machining volume the maker gives. In the OSP-P500 configuration the spindle covers a band between 50 and 15,000 rpm, while its high winding is rated at 26 kW. Okuma also names 12,000 and 20,000 min-1 spindles, and prints 30/22 and 33/26 kW motors in brackets as options. Rapid traverse on X, Y and Z is 60 m/min. A disk ATC handles tool changes; the base magazine has 48 pockets, and seven larger magazines are listed, from 64 pockets at the low end to 340 at the top. Okuma also points to redesigned in-machine covers for chip evacuation and to OSP Suite, which comes pre-loaded with apps.
Source: Okuma, October 27, 2026.
What the Okuma MB-5000HII is used for
For plants where floor space is tight, Okuma America's 2021 page names the MB-5000HII: against the model it replaced, Okuma says it takes up 20 percent less room and trims cycle times by up to a quarter through heavier cutting and automation, with short tool changes and fast acceleration.
Source: Okuma, an archived copy of the maker's page from 2021, October 28, 2026.
Okuma MB-5000HII listing history
Where it was listed
equipt.com
3 listings, 2022–2023
surplusrecord.com
2 listings, 2020–2023
machinetools.com
1 listing, 2020
revelationmachinery.com
1 listing, 2020
Filed under CNC Horizontal Machining Centers (HMC) (5) and CNC Vertical Machining Centers (VMC) (1).
Model years seen
2023 ×2, 2022 ×2, 2020 ×3.
What Okuma MB-5000HII listings agree on
X-axis travel
29.92 in
Y-axis travel
29.92 in
Z-axis travel
31.89 in
Spindle speed
15,000 RPM
Spindle power
35 hp
Spindle taper
CAT 40
Tool capacity
48
Looking for an Okuma MB-5000HII for sale?
We have tracked 7 Okuma MB-5000HII listings on 4 marketplaces (equipt.com, surplusrecord.com, machinetools.com and revelationmachinery.com), model years 2020 to 2023. We buy Okuma MB-5000HII machines and do not sell them.
Every Okuma MB-5000HII we have tracked
2022 Okuma MB-5000HII
2 listings (equipt.com)
2020 Okuma MB-5000HII
2020 Okuma MB-5000HII
Metal Cutting · 2 listings (machinetools.com, surplusrecord.com)
The Okuma MB-5000HII among machining centers and mills
Browse all CNC Horizontal Machining Centers (HMC), or see every Okuma machine we track.
Models related to the Okuma MB-5000HII
Okuma MB-4000H
Same series
Okuma MB-8000H
Same series
Have an Okuma MB-5000HII to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
