2008 Okuma MA-400HA
2 listings (surplusrecord.com)
CNC Horizontal Machining Centers (HMC)
Okuma MA-400HA
19 Okuma MA-400HA listings have come through the used market we track: 9 marketplaces, built 2003–2008 where given; 13 machines once repeats are merged.
22 inX-axis travel
24 inY-axis travel
24.61 inZ-axis travel
CAT 40Spindle taper
What the maker publishes about the current Okuma MA-400HA
Okuma Japan files the MA-400HA under horizontal machining centers; its product page holds a basic table of six figures. Parts mount on a square pallet of 400 x 400 mm, and ø600 x 710 mm is given as the largest workpiece the machine accepts. The table gives a spindle speed of 8,000 min⁻¹. The main motor's ratings are 15 kW for spells of up to 10 minutes and 11 kW for running without a break. Tool storage is listed at 30 tools. Measured across the front, the machine is 2,414 mm wide; it runs 4,532 mm from front to back and rises to 2,759 mm, so its depth is close to twice its width.
Source: Okuma, October 27, 2026.
Okuma MA-400HA specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Spindle and speed
Max spindle speedSpindle speed
8,000 min-1
Spindle motor powerMain motor (10 min/continuous)
15/11 kW (10 min/continuous)
Table, turret and tools
Pallet size
400×400 mm
Tool capacityTool storage
30
Dimensions and weight
Floor spaceMachine size (W×D×H)
2,414×4,532×2,759 mmwidth x depth x height
Further figures the manufacturer publishes
Max workpiece size
ø600×710 mm
- manufacturer specification page, fetched October 27, 2026.
What fits an Okuma MA-400HA
Each of these follows from a published specification above, which is named beside it.
Pallets and fixturing
Fixtures, tombstones and spare pallets are cut for a pallet of this size and do not transfer to another machine. On a horizontal they are a large share of what is being sold, so count them before quoting.
Derived from Pallet size: 400×400 mm
What to check on an Okuma MA-400HA
- Spindle. The manufacturer gives a spindle speed of 8,000 min-1. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 15/11 kW (10 min/continuous) of spindle power. Take a heavy cut and watch the load meter.
- Tool changer. The manufacturer gives the tool capacity as 30. Cycle every pocket and watch for a hesitation.
- Pallet changer. The manufacturer gives a pallet size of 400×400 mm. Run a full pallet change, and count the pallets and fixtures that come with the machine.
- Rigging and floor. The manufacturer gives a floor space of 2,414×4,532×2,759 mm (width x depth x height). Confirm the rigging route and the floor will take that.
Okuma MA-400HA listing history
Where it was listed
equipt.com
5 listings, 2003–2007
exapro.com
3 listings, 2005–2006
machinetools.com
3 listings, 2004
surplusrecord.com
3 listings, 2003–2008
cncmachines.com
1 listing, 2003
gaec.com
1 listing, 2007
machnet.com
1 listing, 2004
usedcnc.com
1 listing, 2006
vigert.com
1 listing, 2007
Filed under CNC Horizontal Machining Centers (HMC) (10) and CNC Vertical Machining Centers (VMC) (5).
Model years seen
2008 ×2, 2007 ×3, 2006 ×4, 2005 ×2, 2004 ×2, 2003 ×3.
What Okuma MA-400HA listings agree on
X-axis travel
22 in
Y-axis travel
24 in
Z-axis travel
24.61 in
Spindle speed
8,000 RPM
Spindle power
20 hp
Spindle taper
CAT 40
Tool capacity
60
Machine weight
25,080 lb
What affects the value of a used Okuma MA-400HA
- Build year. The units we tracked were built from 2003 to 2008, across 6 model years, most often 2006 (4 units).
- Against the published figures. The manufacturer gives max spindle speed 8,000 min-1, spindle motor power 15/11 kW (10 min/continuous), tool capacity 30 and pallet size 400×400 mm.
Looking for an Okuma MA-400HA for sale?
We have tracked 19 Okuma MA-400HA listings on 9 marketplaces (equipt.com, exapro.com, machinetools.com, surplusrecord.com, cncmachines.com, gaec.com, machnet.com, usedcnc.com and vigert.com), model years 2003 to 2008. We buy Okuma MA-400HA machines and do not sell them.
2008 · 2007 · 2007 · 2006 · 2006 · 2006 · 2005 · 2005 · 2004 · 2003 · 2003
Every Okuma MA-400HA we have tracked
2007 Okuma MA-400HA
2 listings (equipt.com, vigert.com)
2007 Okuma MA-400HA
2006 Okuma MA-400HA
Metal Cutting · 2 listings (equipt.com)
2006 Okuma MA-400HA
CNC Vertical Machining Centers (VMC)
2006 Okuma MA-400HA
2005 Okuma MA-400HA
CNC Vertical Machining Centers (VMC)
2005 Okuma MA-400HA
2004 Okuma MA-400HA
2 listings (machinetools.com, machnet.com)
2003 Okuma MA-400HA
Metal Cutting · 2 listings (equipt.com, surplusrecord.com)
2003 Okuma MA-400HA
CNC Vertical Machining Centers (VMC)
3 more listings, no year.
The Okuma MA-400HA among machining centers and mills
Browse all CNC Horizontal Machining Centers (HMC), or see every Okuma machine we track.
Models related to the Okuma MA-400HA
Okuma MA 500HII
Same series
Have an Okuma MA-400HA to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
