CNC 5-Axis Machining Centers

Mazak VORTEX 1400/160-II

4 Mazak VORTEX 1400/160-II listings have come through the used market we track: 3 marketplaces, built 2006 where given; 2 machines once repeats are merged.

55.12 inY-axis travel

24.02 inZ-axis travel

10,000 RPMSpindle speed

50 hpSpindle power

Get an offer Call 517-514-5190

What the maker publishes about the current Mazak VORTEX 1400/160-II

Mazak's VORTEX 1400/160-II is the double column version in the VORTEX II line of simultaneous 5-axis vertical machining centers, a series whose spindle tilts. Its two rotary axes each swing ±40°. A 157.48" × 49.21" table carries up to 15432 lbs spread evenly. Strokes measure 165" on X, 55" on Y and 24" on Z. The gap between spindle nose and table runs from 8" to 32". The spindle takes CAT No.50 tooling and peaks at 10000 rpm. Motor ratings are 37 kW (50 HP) for 30 minutes and 30 kW (40 HP) continuous, with torque figures of 86.3 and 70.1 ft-lbs. The changer stores 30 tools; each may be Φ5" across, or Φ8" with neighboring pockets left empty, 15" long from the gauge line and 44 lbs. Rapid rates are 787 IPM on X and Z and 1260 IPM on Y. Under the MAZAK FX heading the machine measures 471" × 183" in width and length; it stands 160" high and weighs 81571 lbs.

Source: Mazak, October 27, 2026.

What the Mazak VORTEX 1400/160-II is used for

Mazak Corporation's 2014 page for the VORTEX 1400/160-II gives it a large table for big multi-surface workpieces of the sort often seen in aerospace, a tilt-rotary spindle that swings 40 degrees each way, and lists auto and truck, construction and farm, consumer electronics, contract and energy work among its uses.

Source: Mazak, an archived copy of the maker's page from 2014, October 28, 2026.