Mazak HCN-6000

What the maker publishes about the current Mazak HCN-6000

Mazak lists the HCN-6000 among its horizontal machining centers, fitted with a 2 pallet changer and 19.69" × 19.69" pallets, and it accepts workpieces up to Φ35.43" × 39.37". Its standard spindle takes CAT No.50 tooling and turns to 10000 rpm. The spindle motor gives 37 kW (50 HP) at 40%ED or 30 kW (40 HP) continuous, with torque of 350 N･m and 238 N･m respectively. A high torque spindle is an option, running to 7000 rpm with 442 N・m on a 30 minute rating. The magazine stores 43 tools, each up to Φ5" across (Φ10" when neighboring pockets are empty), 20" long from the gauge line and 66 lbs. X, Y and Z all travel 32", and the spindle center sits between 4" and 35" above the pallet top. Every axis rapids at 2362 IPM. In the configuration Mazak lists, the machine measures 122" × 268" in width and length, stands 133" high and weighs 34833 lbs.

Source: Mazak, October 24, 2026.

What the Mazak HCN-6000 is used for

Mazak's HCN series page, which lists the HCN-6000, describes linear roller guides on all three axes for heavy cutting and lists factory automation for anything from a single machine to a production line.

Source: Mazak, October 24, 2026.

Mazak HCN-6000 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 24, 2026.

What fits a Mazak HCN-6000

Each of these follows from a published specification above, which is named beside it.

What to check on a Mazak HCN-6000

• Spindle. The manufacturer gives a spindle speed of 10000 rpm (standard spindle). Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 37 kW (50 HP) (40%ED) or 30 kW (40 HP) (continuous rating) of spindle power. Take a heavy cut and watch the load meter.
• Spindle taper. The manufacturer gives a spindle taper of CAT No.50. Check it for fretting and that the drawbar holds a tool.
• Axes and way covers. The manufacturer gives X 32", Y 32" and Z 32" of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 2362 IPM (X, Y and Z each). Measure the backlash on each axis.
• Tool changer. The manufacturer gives the tool capacity as 43. Cycle every pocket and watch for a hesitation.
• Rigging and floor. The manufacturer gives a machine weight of 34833 lbs and a floor space of 122" × 268" (MAZATROL SmoothG version). Confirm the rigging route and the floor will take that.

Mazak HCN-6000 listing history

Where it was listed

Sellers also listed it as NEXUS HCN 6000, NEXUS-6000.

Filed under CNC Horizontal Machining Centers (HMC) (13) and CNC Horizontal Boring Mills (1).

Model years seen

2018, 2011 ×2, 2008 ×2, 2006 ×3, 2005 ×3, 2004 ×3.

What Mazak HCN-6000 listings agree on

What affects the value of a used Mazak HCN-6000

• Options. The units we tracked split on spindle speed (10,000 RPM on 8 machines, 7,000 RPM on 2 machines), spindle power (50 hp on 7 machines, 40 hp on 2 machines) and tool capacity (120 on 2 machines, 80 on 2 machines, 60 on 2 machines).
• Build year. The units we tracked were built from 2004 to 2018, across 6 model years.
• Against the published figures. The manufacturer gives max spindle speed 10000 rpm (standard spindle), spindle motor power 37 kW (50 HP) (40%ED) or 30 kW (40 HP) (continuous rating), tool capacity 43 and X-axis travel 32".

Looking for a Mazak HCN-6000 for sale?

We have tracked 16 Mazak HCN-6000 listings on 7 marketplaces (exapro.com, usedcnc.com, equipt.com, machinetools.com, machsys.com, surplusrecord.com and vigert.com), model years 2004 to 2018. We buy Mazak HCN-6000 machines and do not sell them.

2018 · 2011 · 2011 · 2008 · 2008 · 2006 · 2006 · 2005 · 2005 · 2004 · year not given

Every Mazak HCN-6000 we have tracked

The Mazak HCN-6000 among machining centers and mills

Browse all CNC Horizontal Machining Centers (HMC), or see every Mazak machine we track.

Models related to the Mazak HCN-6000