2024 Doosan SVM 4100
2 listings (usedmachinerysales.com)
CNC Vertical Machining Centers (VMC)
Doosan SVM 4100
6 Doosan SVM 4100 listings have come through the used market we track: 4 marketplaces, built 2022–2024; 4 machines once repeats are merged.
12,000 RPMSpindle speed
30Tool capacity
3,850 kgMachine weight
30.3 inX-axis travel
What the maker publishes about the current Doosan SVM 4100
DN Solutions builds the SVM 4100 as a vertical machining center in its SVM series, sized around a 410 mm Y axis. Travels measure 30 inch on X, 16 inch on Y and 20 inch on Z. The table is 36 inch by 16 inch and holds workpieces up to 1323 lb. Its direct-coupled spindle has a 12000 r/min top speed. It delivers 25 hp and 70 ft-lb of torque through an ISO #40 7/24 taper. All three axes rapid at 1417 ipm. Grease lubrication serves the axis roller guideways as standard equipment. An EOP function opens from a pop-up window on the main NC screen. DN Solutions aims the series at lightweight workpieces cut with high feed-axis acceleration and deceleration. The machine weighs 8488 lb. Its footprint runs 85 inch long by 89 inch wide, and it stands 105 inch tall.
Source: DN Solutions, September 27, 2026.
What the Doosan SVM 4100 is used for
DN Solutions aims the SVM 4100 at fast cutting of lightweight workpieces, where rapid spindle acceleration and braking shorten each cycle.
Source: DN Solutions, October 26, 2026.
Doosan SVM 4100 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX-Axis Travel Distance
30 inch
Y-axis travelY-Axis Travel Distance
16 inch
Z-axis travelZ-Axis Travel Distance
20 inch
Spindle and speed
Max spindle speedMax. spindle speed
12000 r/min
Spindle motor powerMax. Spindle Power
25 hp
Spindle taperTool Taper
ISO #40 7/24 TAPER
Rapid traverseX/Y/Z-Axis Rapid Traverse
1417 ipm
Table, turret and tools
Table sizeTable Length x Table Width
36 inch x 16 inch
Max table loadMaximum Workpiece weight
1323 lb
Dimensions and weight
Machine weightWeight
8488 lb
Floor spaceLength x Width x Height
85 inch x 89 inch x 105 inch
Further figures the manufacturer publishes
Max. Spindle Torque
70 ft-lb
- manufacturer specification page, fetched October 26, 2026.
What fits a Doosan SVM 4100
Each of these follows from a published specification above, which is named beside it.
40-taper toolholders
This is a 40-taper spindle — the 7:24 steep taper that CAT-40, BT-40 and DIN 69871 (SK-40) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed.
Derived from Spindle taper: ISO #40 7/24 TAPER
What to check on a Doosan SVM 4100
- Spindle. The manufacturer gives a spindle speed of 12000 r/min. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 25 hp of spindle power and 70 ft-lb of spindle torque. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of ISO #40 7/24 TAPER. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 30 inch, Y 16 inch and Z 20 inch of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 1417 ipm. Measure the backlash on each axis.
- Table. The manufacturer gives a table size of 36 inch x 16 inch and a table load of 1323 lb. Check the table and its T-slots for damage.
- Rigging and floor. The manufacturer gives a machine weight of 8488 lb and a floor space of 85 inch x 89 inch x 105 inch. Confirm the rigging route and the floor will take that.
Doosan SVM 4100 listing history
Where it was listed
equipt.com
2 listings, 2022–2023
usedmachinerysales.com
2 listings, 2024
exapro.com
1 listing, 2023
surplusrecord.com
1 listing, 2022
Filed under CNC Vertical Machining Centers (VMC) (6).
Model years seen
2024 ×2, 2023 ×2, 2022 ×2.
What Doosan SVM 4100 listings agree on
X-axis travel
30.3 in
Y-axis travel
16.1 in
Z-axis travel
20.1 in
Table size
920 x 410 mm
Spindle speed
12,000 RPM
Spindle power
25 hp
Tool capacity
30
Machine weight
3,850 kg
What affects the value of a used Doosan SVM 4100
- Build year. The units we tracked were built from 2022 to 2024, across 3 model years.
- Against the published figures. The manufacturer gives max spindle speed 12000 r/min, spindle motor power 25 hp, X-axis travel 30 inch and Y-axis travel 16 inch.
Looking for a Doosan SVM 4100 for sale?
We have tracked 6 Doosan SVM 4100 listings on 4 marketplaces (equipt.com, usedmachinerysales.com, exapro.com and surplusrecord.com), model years 2022 to 2024. We buy Doosan SVM 4100 machines and do not sell them.
Every Doosan SVM 4100 we have tracked
2023 Doosan SVM 4100
2023 Doosan SVM 4100
2022 Doosan SVM 4100
2 listings (surplusrecord.com, equipt.com)
The Doosan SVM 4100 among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Doosan machine we track.
Related CNC Vertical Machining Centers (VMC) models in this directory
Doosan DNM 4500
- Units tracked
- 23
- Years seen
- 2016–2024
Doosan DNM-4500S
- Units tracked
- 6
- Years seen
- 2016–2021
Doosan VC 3600
- Units tracked
- 2
- Years seen
- 2018–2020
- X-axis travel
- 520 mm1this model: 30 inch2
- Y-axis travel
- 360 mm1this model: 16 inch2
- Doosan VC 3600: manufacturer specification page, fetched October 27, 2026.
- Doosan SVM 4100: manufacturer specification page, fetched October 26, 2026.
Have a Doosan SVM 4100 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
