2020 Doosan VC 3600
Metal Cutting
CNC Vertical Machining Centers (VMC)
Doosan VC 3600
2 Doosan VC 3600 listings have come through the used market we track: 2 marketplaces, built 2018–2020.
20.5 inX-axis travel
12.6 inY-axis travel
12,000 RPMSpindle speed
25 hpSpindle power
What the maker publishes about the current Doosan VC 3600
The VC 3600 is a vertical machining center made by DN Solutions. It belongs to the maker's VC series, which DN Solutions describes as machines with a twin pallet configuration. Travel on the three linear axes is 520 mm in X, 360 mm in Y and 465 mm in Z, printed in inches as 20, 14 and 18. Every axis rapids at 48 m/min, the same as 1890 ipm. Top spindle speed is 12000 r/min. Peak torque at the spindle is 95 N·m, which the imperial table gives as 70 ft-lb. For tool holding, the page assigns the VC 3600 an ISO #40 taper. According to the dimensions rows, the machine stands 2657 mm high, runs 3044 mm in length and is 1900 mm wide. Its weight is listed as 5400 kg, or 11905 lb.
Source: DN Solutions, October 27, 2026.
What the Doosan VC 3600 is used for
DN Solutions lists the VC 3600 in its VC series of twin-pallet vertical machining centers, which keep cutting on one pallet while parts are changed on the other, for runs of many parts.
Source: DN Solutions, October 27, 2026.
Doosan VC 3600 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX-Axis Travel Distance
520 mm
Y-axis travelY-Axis Travel Distance
360 mm
Z-axis travelZ-Axis Travel Distance
465 mm
Spindle and speed
Max spindle speedMax. Spindle Speed
12000 r/min
Spindle taperTool Taper (highlight: VC 3600)
ISO #40
Rapid traverseX-/Y-/Z-Axis Rapid Traverse
48 m/minX, Y and Z axes each
Dimensions and weight
Machine weightWeight
5400 kg
Further figures the manufacturer publishes
Max. Spindle Torque
95 N·m
Length
3044 mm
Height
2657 mm
Width
1900 mm
- manufacturer specification page, fetched October 27, 2026.
What fits a Doosan VC 3600
Each of these follows from a published specification above, which is named beside it.
40-taper toolholders
This is a 40-taper spindle — the 7:24 steep taper that CAT-40, BT-40 and DIN 69871 (SK-40) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed.
Derived from Spindle taper: ISO #40
What to check on a Doosan VC 3600
- Spindle. The manufacturer gives a spindle speed of 12000 r/min. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 95 N·m of spindle torque. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of ISO #40. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 520 mm, Y 360 mm and Z 465 mm of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 48 m/min (X, Y and Z axes each). Measure the backlash on each axis.
- Rigging and floor. The manufacturer gives a machine weight of 5400 kg, a length of 3044 mm, a width of 1900 mm and a height of 2657 mm. Confirm the rigging route and the floor will take that.
Doosan VC 3600 listing history
Where it was listed
surplusrecord.com
1 listing, 2020
usedcnc.com
1 listing, 2018
Model years seen
2020, 2018.
What Doosan VC 3600 listings agree on
X-axis travel
20.5 in
Y-axis travel
12.6 in
Spindle speed
12,000 RPM
Spindle power
25 hp
Tool capacity
20
What affects the value of a used Doosan VC 3600
- Build year. The units we tracked were built from 2018 to 2020, across 2 model years.
- Against the published figures. The manufacturer gives max spindle speed 12000 r/min, X-axis travel 520 mm, Y-axis travel 360 mm and Z-axis travel 465 mm.
Looking for a Doosan VC 3600 for sale?
We have tracked 2 Doosan VC 3600 listings on 2 marketplaces (surplusrecord.com and usedcnc.com), model years 2018 to 2020. We buy Doosan VC 3600 machines and do not sell them.
Every Doosan VC 3600 we have tracked
2018 Doosan VC 3600
CNC Vertical Machining Centers (VMC)
The Doosan VC 3600 among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Doosan machine we track.
Models related to the Doosan VC 3600
Doosan VC 630/5AX
Same series
Have a Doosan VC 3600 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
