Machine Tool Exchange buys used CNC machines directly from shops, manufacturers, and machine owners across all 50 states. Whether you are clearing one machine off the floor after a job runs out, replacing an older fleet, right-sizing capacity, consolidating a facility, or settling a shop, we make a fast, fair, market-based offer and pay at pickup. One call, one quote, one check.
We are the buyer. We are not an auction. We are not a broker. We are not a listing service that takes a cut and makes you wait on third-party bids. You do not list your machine, pay a commission, or gamble on what an auction brings. You tell us what you have, we tell you what it is worth, and we write the check.
Call 800-822-9524 or submit your machine details to get a quote within 24-48 hours.
We Buy Used CNC Machines Directly From Sellers Nationwide
Machine Tool Exchange is a direct buyer of used CNC machines nationwide. MTE buys CNC lathes, machining centers (VMC and HMC), 5-axis machines, turning centers, grinders, EDM, mills, and gear and specialty machines, in any condition, any brand, a single machine or a full shop. We buy outright, handle rigging and freight, and pay at pickup.
When you decide to sell a used CNC machine, you have a few paths, and most of them cost you time or money. You can list it on a marketplace and pay a commission while you wait for someone to bid. You can run it through an auction and accept whatever the room brings on the day. You can post it on eBay or Facebook and field tire-kickers for weeks. Or you can sell it to a direct buyer who quotes it, buys it, and removes it. MTE is that direct buyer.
We purchase your machine outright. We do not buy on consignment, we do not list it for you, and we do not route you into an appraisal or a financing funnel. We make one offer, and when you accept it, we handle the rigging and freight at no cost to you and pay at pickup. Whether it is a single machine sitting idle in a back corner or a row of machining centers coming out during a plant changeover, you get one quote, one contact, and one pickup.
We buy nationwide, and we buy machines in every state of repair. Running in production, under power, sitting idle, or fully decommissioned, a CNC machine still carries value on the secondary market, and we make an offer on it. If you have something to move, call 800-822-9524 or tell us what you have.
What Is My CNC Machine Worth? Our Valuation Method
MTE values a used CNC machine on its brand, model, year, condition, spindle hours, included tooling, and current secondary-market demand, then returns a transparent, market-based cash offer within 24-48 hours. There is no fee, no commission, no listing cost, and no obligation, and the offer is a real number you can act on, not a lowball formula.
The most common question a seller asks is a fair one: what is my machine actually worth? The honest answer is that it depends on the details, and a credible buyer looks at the same things you would if you were on the other side of the deal. Here is what we weigh when we build your number.
- Brand and model. A used Mazak, Okuma, or DMG Mori carries a different floor than a lesser-known make, and within a brand the model and class set the range. We know what the recognized names are worth because we buy them constantly.
- Year and control generation. Newer machines and current control generations bring more, because they are what the next buyer wants to program and run.
- Condition and spindle hours. Way condition, spindle hours, whether the machine is cutting accurate parts, and how it has been maintained all move the number up or down.
- Included tooling and options. Live tooling, sub-spindles, rotaries, bar feeders, high-pressure or through-spindle coolant, probing, and tool packages add real value, so list what comes with the machine.
- Current secondary-market demand. What that exact class of machine is actually trading for right now, across the live used market, anchors the offer to reality.
We do not run your machine through a calculator and we do not pretend a tool can replace knowing the market. We do not charge an appraisal fee, take a listing fee, or skim a 5 percent commission off the back end. The number we quote is the number you receive. Quotes come back within 24 to 48 hours, and there is no pressure and no obligation to accept. To start, call 800-822-9524 or submit your machine details.
CNC Machines We Buy
MTE buys the full range of used CNC equipment. Below are the families we see and purchase most often, grouped by type. If your machine is not listed here, it does not mean we will not buy it. We also buy every other category of industrial machinery through our broader sell your machine program, so call 800-822-9524 and we will tell you.
Turning: Lathes, Turning Centers, and VTLs
CNC turning equipment holds strong resale value and moves quickly on the used market. We buy two-axis and multi-axis lathes, sub-spindle and Y-axis machines, mill-turn turning centers, and vertical turning lathes of every size. Live tooling, bar feeders, and sub-spindles all add to the number. You can sell your CNC lathe, sell your CNC turning center, or sell your VTL to us directly, single units or full turning cells.
Milling and Machining Centers: VMC, HMC, 5-Axis, and Mills
Vertical and horizontal machining centers are the backbone of most shops, and they are the machines we buy most. We purchase three-axis verticals, production horizontals with pallet pools, mold and die machines, and the high-demand five-axis machines that shops are upgrading into. Five-axis capability commands the highest dollars per unit, and demand keeps climbing. You can sell your VMC, sell your HMC, sell your CNC mill, or sell your 5-axis CNC machine, in any brand and any configuration.
Grinding
Precision grinding equipment carries strong value because the buyers who need it need it specifically. We buy surface, cylindrical, centerless, and CNC profile grinders. If you have grinding capacity coming off the floor, you can sell your CNC grinder to us alongside any related tooling and fixtures.
EDM
Electrical discharge machines hold their value with the toolmakers and mold shops that rely on them. We buy both wire and sinker EDM. You can sell your EDM machine or sell your wire EDM to MTE, running or idle, single units or a full department.
Have a CNC machine to sell? Get a quote now or call 800-822-9524.
How Selling Your CNC Machine to MTE Works
Selling a CNC machine to Machine Tool Exchange is a three-step process: tell us what you have, get a market-based quote within 24-48 hours, and we handle the rigging and freight and pay at pickup. There is no listing, no auction wait, and no commission.
Step 1: Tell Us What You Have
Call 800-822-9524 or fill out the form. Give us the make, model, year, and condition. Photos, spindle hours, and a note on the control type and any tooling or options speed up the quote and tend to raise the number, but they are not required to get started. Selling more than one machine? A simple list with models and quantities is enough to begin.
Step 2: Get a Quote Within 24-48 Hours
Our purchasing team values your machine against current secondary-market data along with its model, year, condition, spindle hours, and included tooling. Because we are in the used market every day, we can build an accurate, transparent number quickly. No lowball formulas, no pressure, no obligation, and no fee to find out what your machine is worth.
Step 3: We Handle Rigging, Freight, and Pay at Pickup
Accept the quote and MTE takes it from there. We arrange and pay for rigging, crating, and freight nationwide, and we pay at pickup. We coordinate the removal around your schedule so the machine comes off the floor with no logistics cost or hassle to you, whether it is one lathe or a row of machining centers.
No listing your machine and waiting months. No auction gamble. No 5 percent commission. No tire-kickers. One quote, one pickup, one payment.
Ready to sell? Call 800-822-9524 or start your quote for a number within 24-48 hours.
Why Sell Your CNC Machine to MTE Instead of a Marketplace or Auction
Sellers choose MTE over a marketplace or auction because MTE is the direct buyer, not a middleman. We purchase your CNC machine outright with no listing fee and no commission, we make one market-based offer instead of waiting on third-party bids, and we cover rigging and freight nationwide with payment at pickup.
When you weigh where to sell a used CNC machine, the difference comes down to who actually buys it and what it costs you to find out. Here is how MTE compares to the other paths.
- Direct buyer, not a listing marketplace. A marketplace lists your machine, charges to promote it, and takes a commission while you wait for someone else to make an offer. MTE makes the offer. We buy outright, with no listing fee, no paid promotion, and no percentage off the back end.
- One quote, not an auction. An auction sells your machine for whatever the room brings on the day, after the platform takes its cut. MTE writes the check directly, so you know your number before you commit, not after.
- A stated method, not a vague "fair offer." Thin competitors promise a fair price and never say how they reach it. We tell you exactly what we weigh: brand, model, year, condition, spindle hours, tooling, and current demand.
- Logistics handled, not your problem. We arrange and pay for rigging, crating, and freight nationwide. Many sellers learn too late that a "buyer" expects them to handle the heavy lifting. We do not.
- Any brand, any type, any condition. Running, idle, under power, or non-running, a single machine or a full shop, we make an offer. Selling a CNC machine to MTE is not contingent on the machine being perfect.
- Nationwide, with fast payment. We buy in all 50 states and pay at pickup. No net-30 invoicing, no waiting on an auction result, no chasing a marketplace buyer who never wires the funds.
If you are deciding where to sell a used CNC machine, the simplest path is the one that ends with a check. Call 800-822-9524 or tell us what you have.
About the Buyer
Jason Puuri is the owner of Machine Tool Exchange and its parent company, Superior Machine Tools, based in Lansing, Michigan, founded in 2012. He leads MTE's used-CNC acquisition work and handles final equipment valuations and closing conversations directly with sellers. His focus is the secondary market for industrial CNC machine tools: what lathes, machining centers, five-axis machines, turning centers, grinders, and EDM are actually worth, how shop upgrades and plant changeovers move that equipment, and how to get a fair number into a seller's hands quickly.
Under Jason's direction, MTE buys CNC machines outright from shops and manufacturers nationwide, handles the logistics, and pays at pickup. When you sell to MTE, you work with the person who sets the price and writes the check, not a broker passing you along or a bidding platform that lists your machine and waits.
Reach Jason's purchasing team at 800-822-9524 or through the sell your CNC machine form.
Frequently Asked Questions
Who buys used CNC machines?
Machine Tool Exchange is a direct buyer of used CNC machines nationwide: lathes, machining centers (VMC and HMC), 5-axis machines, turning centers, grinders, EDM, mills, boring mills, and gear and specialty machines, any brand, any condition, a single machine or a full shop. We buy outright and pay at pickup.
How much is my used CNC machine worth, and how does MTE decide what to pay?
MTE makes a market-based offer using the machine's brand, model, year, condition, spindle hours, included tooling, and current secondary-market demand. The offer is transparent, with no lowball formula, no fee, and no obligation.
How fast can I get a quote?
Most quotes are returned within 24 to 48 hours after we get the make, model, year, and condition. Photos and spindle hours help us reach an accurate number faster but are not required.
Is MTE a direct buyer, or a marketplace, auction, or broker?
MTE is a direct buyer. We purchase your CNC machine outright. There is no listing, no listing fee, no commission, no auction, and no waiting for third-party bids.
Can I sell a used CNC machine for cash, and when do I get paid?
Yes. MTE makes a cash offer and pays at pickup. There is no net-30 invoicing and no waiting on an auction result.
Does MTE handle rigging and freight?
Yes. MTE arranges and pays for rigging, crating, and freight nationwide, and coordinates the removal around your schedule.
Does MTE buy non-running or older CNC machines, or an entire shop?
Yes. We buy CNC machines in any condition, including idle, under-power, and non-running equipment, and we buy a single machine or an entire shop in one transaction.
We Buy Used CNC Machines Nationwide -- Get Your Quote
The fastest way to find out what your CNC machine is worth is to tell us what you have.
Call: 800-822-9524 (toll-free) Or: Submit your machine details online and we will respond within 1-2 business days. Address: Machine Tool Exchange, Lansing, MI. We buy nationwide.
Machine Tool Exchange, an affiliate of Superior Machine Tools, buys used CNC machines and other industrial equipment from shops and manufacturers across the United States. We buy every CNC type and every other category of industrial machinery, so if you have more than CNC to move, our broader sell your machine program covers the whole floor in one transaction.
One call, one quote, one check. No listing, no auction, no fees. That is how MTE buys.