Used CNC EDM Machines We Buy
Used CNC EDM machines fill 220 listings here, and Machine Tool Exchange buys them direct from the shops that own them, no broker and no auction involved. Makino is the most common builder here at 164 of the 220 machines, Fanuc follows at 31, with 141 distinct model numbers across them. Here is what moves a number.
Call 517-514-5190- 221Units indexed
- 24–48hQuote
- Rigging& freight handled
- DirectNot a broker
Quote in 24–48 hrsFrom the buyer, not a broker
Buying since 2012Outright purchases only221 machines, page 1 of 10
- CNC EDM MachinesMakino EDBV8
- CNC EDM MachinesMakino EDNC 64
- CNC EDM MachinesMakino U6 (2017)
- CNC EDM MachinesMakino DUO64 (2008)
- CNC EDM MachinesMakino EDAF2-FH
- CNC EDM MachinesMakino ednc85s-sinker-edm (2015)
- CNC EDM MachinesMakino EDNC20
- CNC EDM MachinesMakino EDNC43S (1999)
- CNC EDM MachinesMakino EDNC85S (2019)
- CNC EDM MachinesMakino V77 (2011)
- CNC EDM MachinesEmag PECM PT
- CNC EDM MachinesMakino EDAF3-FH
- CNC EDM MachinesCNC WIRE EDM (2007)
- CNC EDM MachinesMakino EDNC 106
- CNC EDM MachinesMakino EDNC15
- CNC EDM MachinesMakino EDNC32-A8MA
- CNC EDM MachinesMakino EDAF2
- CNC EDM MachinesMakino EDNC17
- CNC EDM MachinesMakino EDNC6
- CNC EDM MachinesMakino EU 64 (2006)
- CNC EDM MachinesMakino sp43-cnc-wire-edm (2007)
- CNC EDM MachinesMakino EDNC 43 (2004)
- CNC EDM MachinesMakino EDNC10
- CNC EDM MachinesMakino EDNC157 (2014)
What Is on This EDM Page Right Now
This page holds 220 used EDM machines from nine manufacturers, and those are catalog counts rather than a rounded selection. Across the 220 listings there are 141 distinct model numbers, which tells you close to half of what sits here is a one-off configuration rather than a stocked model line, so each machine gets scoped on its own instead of priced off a model table. Concentration at the top is heavy. Makino is the most common builder on this page at 164 of the 220 machines, Fanuc follows at 31 and Chevalier at 11, which puts 206 of the 220 machines with three builders. A build year is recorded on 164 of the 220 listings, and the machines where a build year is recorded run from 1986 through 2023. The remainder carry no recorded year at all, which is ordinary on EDM equipment that has changed hands or come through a plant move.
Model Families We See Most on These EDM Machines
Model families are where this page has real depth. ROBOCUT is the largest family here at 19 listings, then EDNC at 17, U3 at 12, U6 at 9 and SP43 at 8. EDGE2 and EDNC43 each show 7. Four more sit at 6 apiece: EDAF3, EDNC85, EDAF2 and EDNC6. ALPHA and DUO43 each show 5, and EDNC65, EDNC85S and EDNC64 sit at 4. ROBOCUT is Fanuc's own wire EDM product line. Fanuc is on this page at 31 listings. The catalog spells one designation several ways, and counting those variants together, 56 listings carry a model number beginning with EDNC. Repetition is worth something to a seller. When a platform turns up on this page again and again, we have scoped that platform before and already know which generator, control generation and consumable wear items to look at, so the first number comes back faster than it does on a machine nobody here has handled yet.
What Moves the Offer on a Used EDM
Start with what we ask for on every machine: brand, model, year, condition and control type. Photos help speed the evaluation up but are not required. From there an EDM gets scoped on things a mill never raises. The generator or power supply generation carries as much weight as the frame, and so do the control generation, the work tank size and the X, Y and Z travels. On a wire machine we ask whether automatic wire threading still threads reliably and what shape the wire drive and guides are in. On a sinker we ask about the C-axis, whether an electrode changer comes with it, and the electrode holding or quick-change pallet setup. We ask about the dielectric and filtration system too, resin and filter condition included, since that is the item most often neglected on an idle machine. Jason Puuri scopes these himself, and whether the machine still holds tolerance sits under all of it.
Wire, Sinker and Hole-Drilling Machines We Buy
We buy wire EDM and sinker EDM, also called ram EDM, in all sizes and all control generations, in any condition. Small-hole and hole-drilling machines count too, and one is on this page right now, a Makino BX3 hole-driller. EDM equipment is essential to tool, die and mold shops, and precision wire and sinker machines from the top builders stay in demand on the secondary market, so we buy them whether or not they are cutting parts today. The practical note for a seller is that a wire machine and a sinker machine get scoped on entirely different things. Threading reliability plus wire drive and guide wear drive one conversation. C-axis, electrode handling and tank capacity drive the other. That is why the model number and the control generation tell us more in a first email than a general description of condition, and they are the first things we ask for.
Selling One Outright Instead of Listing or Auctioning It
MTE is a direct buyer, not a broker. We purchase the machine outright, so there is no consignment, no listing and no waiting on a third party to find a buyer for you. We buy outright and arrange the pickup. We can arrange the pickup nationwide. We can arrange the rigging, crating and freight, and service covers all 50 states. Any brand, any condition and any quantity works here. Running, idle or decommissioned, a single machine or a full facility, all of it on one quote and one pickup schedule. That matters most when a shop is clearing floor space against a deadline, because the coordinating is ours to do rather than yours. Machine Tool Exchange is an affiliate of Superior Machine Tools. Call 517-514-5190 or send the machine details through our online form to start.
The Rest of the EDM Lineup We Buy
Beyond Makino, Fanuc and Chevalier, six more manufacturers sit on this page, and together they account for 11 of the 220 machines: Brother at 3, Toshiba at 3, Okuma at 2, and one each from Mazak, Walter and Emag. A thin count on a builder is not a signal that we are uninterested in it. It reflects what is on the page the day you read it, nothing more. The list of EDM builders we buy runs wider than the list we hold. Mitsubishi, Sodick, Agie Charmilles and GF Machining are not on the page today but sit squarely inside what we buy, and one of those gets scoped the same way a Makino does. The same goes for a mixed floor. A shop clearing an EDM cell usually has mills and lathes going out at the same time, and those ride on the same quote and the same pickup schedule.
Ready to sell your machine? Tell us what you have and get a competitive offer in 24-48 hours. We can arrange the removal, rigging and logistics, and we can arrange the truck to move it.
Machine Tool ExchangeNationwide CNC machine buyer since 2012
24-48h quote
Coast-to-coast
Customer Reviews
Superior Machine & Tool completed the removal of all our equipment precisely according to our timeline and specifications. Their professionalism and reliability made them a pleasure to work with, and we highly recommend their services.
Closing down our facility was stressful, but these folks made selling our surplus equipment fast and easy. Their team handled payment right away and coordinated removal like pros.
We had a deadline for our asset removal, and they removed everything safely and finished ahead of schedule. The whole process was seamless and stress-free.
These guys made the whole process so easy. I got paid fast, and they picked up the equipment right on time.
Common questions
How do I sell a used EDM machine?
Send the brand, model, year, condition and control type. A quote typically comes back within 24 to 48 hours. Accept it and we schedule the pickup.
What details do you need to quote my EDM machine?
Brand, model, year, condition and control type. Photos speed it up but are not required. On an EDM, add the generator or power supply generation, which carries as much weight as the frame.
Do you buy wire EDM and sinker EDM, or only one type?
Both. Wire EDM and sinker, also called ram EDM, in all sizes and control generations, in any condition. Small-hole and hole-drilling EDMs too.
Can you arrange rigging and freight?
Yes. MTE can arrange rigging, crating and freight in all 50 states, and we can schedule the crew.
Who arranges the pickup for my EDM machine?
We buy the EDM outright, arrange the pickup, and have it moved off your shop floor.
Will you buy an EDM that is idle or already decommissioned?
Yes. Running, idle or decommissioned, a single machine or a full facility. Say upfront if it has been sitting, since dielectric and filtration usually need attention after downtime.
Do you buy EDM brands that are not showing on this page?
Yes. Nine manufacturers are on this page today, and that is current stock rather than the limit of what we buy. Mitsubishi, Sodick, Agie Charmilles and GF Machining are not on the page, and we buy all four.
Thinking about selling CNC EDM Machines?
Generator and control generation are the first things a shop asks about on a used EDM, which is why they move a number faster than a paragraph on condition. With 141 distinct model numbers across 220 machines, and 108 of those the only listing of their model, a good half of what sits here is its own conversation. Send the model, the control and whether it has been sitting, and Jason Puuri will get a number back inside a day or two.
Fast Response- Fair Offers
- Hassle-Free Process
