CNC Swiss-Type Lathes
Tsugami B0386-III
5 Tsugami B0386-III listings have come through the used market we track: 3 marketplaces, built 2018–2022.
6,000 RPMSpindle speed
1.5 inBar capacity
11 kWSpindle power
10,694 lbMachine weight
What the maker publishes about the current Tsugami B0386-III
Tsugami builds the B0386-III, a 6-axis Swiss-type automatic lathe with opposed gang tooling in its 38 mm class. Bar stock up to 38 mm feeds through the sliding headstock. With the guide bushing in place, headstock stroke is 320 mm. Taken out of the guide bushing and run as a chucker, it has a 70 mm stroke, and the conversion kit comes with the machine. Standard tool positions number 32, with 42 as the maximum. Live positions run from 15 standard to 26 at most. An 8-station driven block handles back working. Main spindle speed spans 200 to 6,000 rpm on a 7.5/11 kW motor. The sub spindle reaches 7,000 rpm, and live tools turn at 6,000 rpm. Rapid traverse is 32 m/min. For heavy cuts, the frame uses large linear guides, three-toggle clamping and extra ribs beneath both spindles. A FANUC 32i-B runs it, and part programs can be written in Tsugami's Abile software for the B0 Series. Weight is 4,850 kg.
Source: Tsugami America, September 27, 2026.
What the Tsugami B0386-III is used for
Tsugami America writes that the B0386-III was laid out for heavy cuts on bar stock up to 38 mm. Its eight-station driven back working block suits parts with many milled and drilled features, and a kit to run it as a chucker without the guide bushing comes with the machine.
Source: Tsugami America, October 27, 2026.
Tsugami B0386-III specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
Bar capacityMaximum Bar Stock
38 mm / 1.5″
Axes# Axes
6
Spindle and speed
Max spindle speedMain Spindle Speed
200 – 6,000 rpm
Spindle motor powerMain Spindle Motor
7.5 / 11 kW
Table, turret and tools
Live toolingLive Tool Speed
6,000 rpm
Control
Control
FANUC 32i-B
Dimensions and weight
Machine weightWeight
4,850 kg / 10,694 lbs.
Floor spaceFootprint: W x D x H
2,240 x 1,515 x 2,050 mm (88″ x 60″ x 81″)
Further figures the manufacturer publishes
Tool positions (std / max)
32/ 42
Live tool positions (std / max)
15 / 26
Sub Spindle Speed
200 – 7,000 rpm
- manufacturer specification page, fetched October 14, 2026.
What fits a Tsugami B0386-III
Each of these follows from a published specification above, which is named beside it.
Bar feeder fit
Bar capacity is 38 mm, so a bar feeder for this machine has to be sized for stock up to that diameter.
Derived from Bar capacity: 38 mm / 1.5″
What to check on a Tsugami B0386-III
- Control generation. The manufacturer specifies FANUC 32i-B for this model. Units we have tracked run 2018 to 2022; an early one may carry an older control or a retrofit.
- Spindle. The manufacturer gives a spindle speed of 200 – 6,000 rpm. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 7.5 / 11 kW of spindle power. Take a heavy cut and watch the load meter.
- Bar work. The manufacturer gives a bar capacity of 38 mm / 1.5″. Check any bar feeder is set for that bar.
- Rotary tools. The manufacturer gives the rotary tooling as 6,000 rpm. Check that the rotary tools still drive under load.
- Second spindle. The manufacturer gives a sub spindle speed of 200 – 7,000 rpm. Check that it synchronizes on a part transfer.
- Rotary axes. The manufacturer gives 6 axes. Run each rotary axis through its range.
- Rigging and floor. The manufacturer gives a machine weight of 4,850 kg / 10,694 lbs. and a floor space of 2,240 x 1,515 x 2,050 mm (88″ x 60″ x 81″). Confirm the rigging route and the floor will take that.
Tsugami B0386-III control
- Control FANUC 32i-B
Tsugami B0386-III listing history
Where it was listed
surplusrecord.com
3 listings, 2018–2021
cncmachines.com
1 listing, 2022
equipt.com
1 listing, 2022
Filed under CNC Swiss-Type Lathes (3) and CNC Lathes (1).
Model years seen
2022 ×2, 2021, 2019, 2018.
What Tsugami B0386-III listings agree on
Bar capacity
1.5 in
Spindle speed
6,000 RPM
Spindle power
11 kW
Machine weight
10,694 lb
What affects the value of a used Tsugami B0386-III
- Control. The manufacturer specifies FANUC 32i-B.
- Build year. The units we tracked were built from 2018 to 2022, across 4 model years, most often 2022 (2 units).
- Against the published figures. The manufacturer gives max spindle speed 200 – 6,000 rpm, spindle motor power 7.5 / 11 kW, bar capacity 38 mm / 1.5″ and live tooling 6,000 rpm.
Looking for a Tsugami B0386-III for sale?
We have tracked 5 Tsugami B0386-III listings on 3 marketplaces (surplusrecord.com, cncmachines.com and equipt.com), model years 2018 to 2022. We buy Tsugami B0386-III machines and do not sell them.
Every Tsugami B0386-III we have tracked
2022 Tsugami B0386-III
CNC Lathes
2021 Tsugami B0386-III
2019 Tsugami B0386-III
Metal Cutting
2018 Tsugami B0386-III
The Tsugami B0386-III among lathes and turning centers
Browse all CNC Swiss-Type Lathes, or see every Tsugami machine we track.
Models related to the Tsugami B0386-III
Tsugami B038T
- Control
- FANUC 31i-B1this model: FANUC 32i-B2
Tsugami B-0325-V-III
Same series
- Bar capacity
- 32 mm / 1.26″3this model: 38 mm / 1.5″2
- Control
- FANUC 0i-TF3this model: FANUC 32i-B2
- Tsugami B038T: manufacturer specification page, fetched October 14, 2026.
- Tsugami B0386-III: manufacturer specification page, fetched October 14, 2026.
- Tsugami B-0325-V-III: manufacturer specification page, fetched October 27, 2026.
Have a Tsugami B0386-III to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
