2022 Tsugami B-0325-V-III
Metal Cutting
Metal Cutting
Tsugami B-0325-V-III
2 Tsugami B-0325-V-III listings have come through the used market we track: 2 marketplaces, all built 2022.
10,031 lbMachine weight
What the maker publishes about the current Tsugami B-0325-V-III
Tsugami's B0325V-III is a Swiss type lathe with a vertical gang tool post, built on the maker's 5-axis B0 platform for parts up to 32 mm / 1.26″ in diameter. The vertical post adds five cross live tools and brings the machine to 29 tool positions in all. Live tool positions are 5 as standard and up to 11, using cartridge type live tools that turn at 6,000 RPM. Both the main and the sub spindle reach 8,000 RPM, and the headstock stroke is 330 mm / 12.99″. The lathe can run in guide bushing mode or as a chucker, and its rotary guide bushing is direct driven. Four positions handle back working, and a deep hole drilling post drills to 140 mm. Mark III models come with thermal displacement compensation as standard. The control is a FANUC 0i-TF, and the footprint measures 2240 by 1515 by 2050 mm. Options listed include polygon cutting, thread whirling and gear hobbing.
Source: Tsugami America, October 27, 2026.
What the Tsugami B-0325-V-III is used for
Tsugami America's 2022 page adds a vertical post of five modular driven tools to the B0325V-III, so it can take on Swiss-turned parts that need more milling, and Tsugami fits thermal displacement compensation as standard on its Mark III models.
Source: Tsugami America, an archived copy of the maker's page from 2022, October 28, 2026.
Tsugami B-0325-V-III specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
Bar capacityMaximum Part Size
32 mm / 1.26″
Axes# Axis
5
Spindle and speed
Max spindle speedMain Spindle Speed
8,000 RPMmain spindle
Sub-spindleSub Spindle Speed
8,000 RPMsub spindle
Table, turret and tools
Turret stations# Tool Positions (std / max)
29
Live tooling# Live Tool Positions (std / max)
5/11standard / maximum
Control
Control
FANUC 0i-TF
Dimensions and weight
Floor spaceFootprint: W x D x H
2240 x 1515 x 2050 mmW x D x H
Further figures the manufacturer publishes
Max Headstock Stroke
330 mm / 12.99″
Live Tool Speed
6,000 RPM
Deep Hole Drilling Post
140 mm
- manufacturer specification page, fetched October 27, 2026.
What fits a Tsugami B-0325-V-III
Each of these follows from a published specification above, which is named beside it.
Bar feeder fit
Bar capacity is 32 mm, so a bar feeder for this machine has to be sized for stock up to that diameter.
Derived from Bar capacity: 32 mm / 1.26″
What to check on a Tsugami B-0325-V-III
- Control generation. The manufacturer specifies FANUC 0i-TF for this model.
- Spindle. The manufacturer gives a spindle speed of 8,000 RPM (main spindle). Run the spindle to top speed and listen for bearing noise.
- Turret. The manufacturer gives the turret stations as 29. Index every station and time a full turn.
- Bar work. The manufacturer gives a bar capacity of 32 mm / 1.26″. Check any bar feeder is set for that bar.
- Rotary tools and second spindle. The manufacturer gives the rotary tooling as 5/11 (standard / maximum). Check that the rotary tools still drive under load. The manufacturer gives the second spindle as 8,000 RPM (sub spindle). Check that it synchronizes with the main spindle on a part transfer.
- Rotary axes. The manufacturer gives 5 axes. Run each rotary axis through its range.
- Rigging and floor. The manufacturer gives a floor space of 2240 x 1515 x 2050 mm (W x D x H). Confirm the rigging route and the floor will take that.
Tsugami B-0325-V-III control
- Control FANUC 0i-TF
When the Tsugami B-0325-V-III was built
Tsugami America had introduced the B0325V-III, a Mark III Swiss type lathe on its B0 platform, by September 26, 2022, the date the Wayback Machine archived its page.
Source: Tsugami America, an archived copy of the maker's page from 2022, October 28, 2026.
Tsugami B-0325-V-III listing history
Where it was listed
machinetools.com
1 listing, 2022
surplusrecord.com
1 listing, 2022
Model years seen
2022 ×2.
What Tsugami B-0325-V-III listings agree on
Machine weight
10,031 lb
Looking for a Tsugami B-0325-V-III for sale?
We have tracked 2 Tsugami B-0325-V-III listings on 2 marketplaces (machinetools.com and surplusrecord.com), model year 2022. We buy Tsugami B-0325-V-III machines and do not sell them.
Every Tsugami B-0325-V-III we have tracked
2022 Tsugami B-0325-V-III
Metal Cutting
The Tsugami B-0325-V-III among machines
Browse all Metal Cutting, or see every Tsugami machine we track.
Models related to the Tsugami B-0325-V-III
Tsugami B038T
Same series
- Bar capacity
- 38 mm / 1.5″1this model: 32 mm / 1.26″2
- Control
- FANUC 31i-B1this model: FANUC 0i-TF2
Tsugami B0386-III
Same series
- Bar capacity
- 38 mm / 1.5″3this model: 32 mm / 1.26″2
- Control
- FANUC 32i-B3this model: FANUC 0i-TF2
- Tsugami B038T: manufacturer specification page, fetched October 14, 2026.
- Tsugami B-0325-V-III: manufacturer specification page, fetched October 27, 2026.
- Tsugami B0386-III: manufacturer specification page, fetched October 14, 2026.
Have a Tsugami B-0325-V-III to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
