Okuma V100R

What the maker publishes about the current Okuma V100R

Okuma lists the V100R, a vertical lathe, in its 1SP-V series. Work up to Ø39.4 in across can be cut on it. Maximum cutting length is 35.0 in. Swing reaches Ø49.21 in. The spindle turns from 13 to 1,250 min⁻¹. Spindle power is rated at 60/50 hp. The X and Z axes both rapid at 78.74 fpm. The frame pairs a box-type base with a box-type column, and the slides ride on box ways. Okuma builds the headstock with flange construction to curb thermal deformation and vibration while cutting. The maker points the V100R at thin parts and odd-shaped work. Chips run off a base shaped for flow, and an optional conveyor can carry them out to the side or the rear to match the plant layout. The operator gets close access to the chuck, a front-skirt panel for up-close jobs and a pendant panel that swivels.

Source: Okuma, September 27, 2026.

What the Okuma V100R is used for

Okuma Europe's V100R page says the single-spindle vertical lathe series it belongs to is meant for cutting thin and odd-shaped workpieces, on a box-type base and column, with a headstock built with a flange to limit heat distortion and vibration.

Source: Okuma Europe, October 27, 2026.

Okuma V100R specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What to check on an Okuma V100R

• Control generation. The manufacturer specifies OSP-P500 for this model. Units we have tracked run 2005 to 2017; an early one may carry an older control or a retrofit.
• Spindle. The manufacturer gives a spindle speed of 13~1,250 min⁻¹. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 45/37 kW (60/50 hp) of spindle power. Take a heavy cut and watch the load meter.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 24 m/min (78.74 fpm). Measure the backlash on each axis.
• Bed and ways. The manufacturer gives a max turning diameter of Ø1,000 mm (Ø39.4 in) and a max turning length of 890 mm (35.0 in). Check the ways for wear near the chuck.

Okuma V100R control and manuals

• Control OSP-P500

In a 2024 video, Okuma says its OSP control holds the machine manuals already loaded, so an operator can open them at the machine, and that other PDF files load onto it from a USB drive.

Source: Okuma America, October 24, 2026.

Okuma V100R listing history

Where it was listed

Filed under CNC Lathes (7) and CNC Vertical Turning Centers (1).

Model years seen

2017 ×2, 2014, 2012, 2011, 2006, 2005.

What Okuma V100R listings agree on

What affects the value of a used Okuma V100R

• Control. The manufacturer specifies OSP-P500.
• Build year. The units we tracked were built from 2005 to 2017, across 6 model years, most often 2017 (2 units).
• Against the published figures. The manufacturer gives max spindle speed 13~1,250 min⁻¹, spindle motor power 45/37 kW (60/50 hp), max turning diameter Ø1,000 mm (Ø39.4 in) and max turning length 890 mm (35.0 in).

Looking for an Okuma V100R for sale?

We have tracked 10 Okuma V100R listings on 6 marketplaces (usedcnc.com, exapro.com, surplusrecord.com, gaec.com, machsys.com and revelationmachinery.com), model years 2005 to 2017. We buy Okuma V100R machines and do not sell them.

2017 · 2017 · 2014 · 2012 · 2011 · 2006 · 2005

Every Okuma V100R we have tracked

3 more listings, no year.

The Okuma V100R among lathes and turning centers

Browse all CNC Lathes, or see every Okuma machine we track.

Models related to the Okuma V100R

1. Okuma V40R: manufacturer specification page, fetched October 27, 2026.
2. Okuma V100R: manufacturer specification page, fetched October 14, 2026.
3. Okuma V760EX: manufacturer specification page, fetched October 27, 2026.

Other CNC Lathes models in this directory

1. Doosan VT 1100: manufacturer specification page, fetched October 14, 2026.
2. Okuma V100R: manufacturer specification page, fetched October 14, 2026.
3. Doosan V8300: manufacturer specification page, fetched October 14, 2026.