Doosan V8300

What the maker publishes about the current Doosan V8300

Within DN Solutions' PUMA V8300/9300 series, the PUMA V8300 turns parts vertically on a 15 inch chuck. Chuck sizes across the series run from 15" to 32". Turned parts on this model can measure 830 mm (33 inch) in diameter. Height of cut runs to 780 mm (31 inch). The X slide strokes 495 mm. Z stroke matches the cut height at 780 mm. Rapid rate is 20 m/min in both X and Z, which the imperial table gives as 787 ipm. The spindle is limited to 2000 r/min. Motor rating is 37 kW (50 hp). Maximum torque reaches 2592 N·m (1912 ft-lb). A servo motor indexes the 12-station turret. An automatic tool changer is optional. The operation panel adjusts in height, and a fixed pendant is an alternative. Footprint dimensions are 2005 mm long and 2715 mm wide, with a height of 3636 mm. The weight figure is 9400 kg (20723 lb).

Source: DN Solutions, September 27, 2026.

What the Doosan V8300 is used for

DN Solutions describes its PUMA V8300/9300 series as medium-size, heavy-duty vertical turning centers for large workpieces, with chucks from 15 in to 32 in across the series; the V8300 itself carries a 15 in chuck.

Source: DN Solutions, October 14, 2026.

Doosan V8300 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Doosan V8300

Each of these follows from a published specification above, which is named beside it.

What to check on a Doosan V8300

• Spindle. The manufacturer gives a spindle speed of 2000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 37 kW (50 hp) of spindle power and 2592 N·m (1912 ft-lb) of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 495 mm (19 inch) and Z 780 mm (31 inch) of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 20 m/min (787 ipm). Measure the backlash on each axis.
• Turret. The manufacturer gives the turret stations as 12. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 15 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 830 mm (33 inch) and a max turning length of 780 mm (31 inch). Check the ways for wear near the chuck.
• Rigging and floor. The manufacturer gives a machine weight of 9400 kg (20723 lb), a machine length of 2005 mm (79 inch), a machine width of 2715 mm (107 inch) and a machine height of 3636 mm (143 inch). Confirm the rigging route and the floor will take that.

Doosan V8300 listing history

Where it was listed

Sellers also listed it as PUMA V8300.

Filed under CNC Lathes (6), CNC Vertical Turret Lathes (VTL) (3), CNC Vertical Machining Centers (VMC) (1) and CNC Vertical Turning Centers (1).

Model years seen

2023 ×2, 2022 ×4, 2019 ×2, 2018, 2017 ×2, 2016.

What Doosan V8300 listings agree on

What affects the value of a used Doosan V8300

• Build year. The units we tracked were built from 2016 to 2023, across 6 model years, most often 2022 (4 units).
• Against the published figures. The manufacturer gives max spindle speed 2000 r/min, spindle motor power 37 kW (50 hp), turret stations 12 and chuck size 15 inch.

Looking for a Doosan V8300 for sale?

We have tracked 13 Doosan V8300 listings on 5 marketplaces (quickmachinerysales.com, surplusrecord.com, machinetools.com, usedcnc.com and equipt.com), model years 2016 to 2023. We buy Doosan V8300 machines and do not sell them.

2023 · 2022 · 2022 · 2022 · 2019 · 2018 · 2017 · 2017 · 2016

Every Doosan V8300 we have tracked

1 more listing, no year.

The Doosan V8300 among lathes and turning centers

Browse all CNC Lathes, or see every Doosan machine we track.

Other CNC Lathes models in this directory

1. Doosan VT 1100: manufacturer specification page, fetched October 14, 2026.
2. Doosan V8300: manufacturer specification page, fetched October 14, 2026.
3. Okuma V100R: manufacturer specification page, fetched October 14, 2026.