Doosan VT 1100

What the maker publishes about the current Doosan VT 1100

The PUMA VT1100 is a vertical turning center in the DN Solutions PUMA VT series, and it clamps parts on a 32 inch chuck. Parts up to 1100 mm in diameter fit the machine. Maximum turning length is 960 mm. Travel is 580 mm on the X-axis and 1000 mm on the Z-axis. Both axes move at a rapid rate of 20 m/min. Power reaches the spindle through a gearbox. Top spindle speed is 850 r/min. The spindle motor is rated at 65 kW. Peak torque at the spindle is 7559 N·m. The turret holds 12 tools. An optional automatic tool changer stores 12 tools on Capto C8 shanks. Each changer tool can measure up to 110 mm across and 450 mm long. Overall, the machine is 2830 mm long, 3305 mm wide and 4012 mm tall. It weighs 22000 kg. DN Solutions also lists a milling version in the same series.

Source: DN Solutions, September 27, 2026.

What the Doosan VT 1100 is used for

DN Solutions aims the PUMA VT1100 vertical turning center at heavy cuts on large parts, up to 1,100 mm across, held in a 32 inch chuck.

Source: DN Solutions, October 14, 2026.

Doosan VT 1100 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Doosan VT 1100

Each of these follows from a published specification above, which is named beside it.

What to check on a Doosan VT 1100

• Spindle. The manufacturer gives a spindle speed of 850 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 65 kW (87 hp) of spindle power and 7559 N·m (5575 ft-lb) of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 580 mm (23 inch) and Z 1000 mm (39 inch) of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 20 m/min (787 ipm). Measure the backlash on each axis.
• Turret. The manufacturer gives the turret stations as 12. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 32 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 1100 mm (43 inch) and a max turning length of 960 mm (38 inch). Check the ways for wear near the chuck.
• Rigging and floor. The manufacturer gives a machine weight of 22000 kg (48502 lb), a machine length of 2830 mm (111 inch), a machine width of 3305 mm (130 inch) and a machine height of 4012 mm (158 inch). Confirm the rigging route and the floor will take that.

Doosan VT 1100 listing history

Where it was listed

Sellers also listed it as PUMA VT1100.

Filed under CNC Lathes (7), CNC Vertical Turret Lathes (VTL) (5), CNC Boring Mills (3) and CNC Vertical Boring Mills (1).

Model years seen

2020, 2017, 2016 ×2, 2014, 2013 ×2, 2012 ×5, 2009, 2008, 2007.

What Doosan VT 1100 listings agree on

What affects the value of a used Doosan VT 1100

• Options. The units we tracked split on chuck size (40 in on 5 machines, 32 in on 3 machines).
• Build year. The units we tracked were built from 2007 to 2020, across 9 model years, most often 2012 (5 units).
• Against the published figures. The manufacturer gives max spindle speed 850 r/min, spindle motor power 65 kW (87 hp), turret stations 12 and chuck size 32 inch.

Looking for a Doosan VT 1100 for sale?

We have tracked 16 Doosan VT 1100 listings on 4 marketplaces (usedcnc.com, quickmachinerysales.com, exapro.com and surplusrecord.com), model years 2007 to 2020. We buy Doosan VT 1100 machines and do not sell them.

2020 · 2017 · 2016 · 2014 · 2013 · 2013 · 2012 · 2012 · 2012 · 2012 · 2009 · 2008 · 2007 · year not given

Every Doosan VT 1100 we have tracked

The Doosan VT 1100 among lathes and turning centers

Browse all CNC Lathes, or see every Doosan machine we track.

Doosan VT 1100 variants