CNC Vertical Machining Centers (VMC)

Okuma MILLAC 1000VH

7 Okuma MILLAC 1000VH listings have come through the used market we track: 4 marketplaces, built 1998–2014 where given.

30 hpSpindle power
39.37 x 39.37 inTable size
120Tool capacity
39.4 inZ-axis travel
Get an offerCall 517-514-5190

What the maker publishes about the current Okuma MILLAC 1000VH

Okuma's MILLAC 1000VH is a five-axis machining center in the MILLAC-VH Series, with a spindle head that swivels so inclined faces are cut in the same chucking. The table is 39.37 x 39.37 in and carries up to 4,400 lbs. Travels read 64.96 in on X, 51.18 in on Y and 39.37 in on Z, and a bracketed Y figure of 62.99 in is also listed. The swivel indexes in steps of 0.001 degree. Rapid traverse is 945 ipm on X and Y and 473 ipm on Z, and the B and C axes rotate at up to 1,440 min⁻¹. The standard spindle spans 20 to 6,000 min⁻¹, with a 100 to 10,000 min⁻¹ spindle shown in brackets. Spindle power reads 30/25 hp. A rotary two-pallet changer comes standard. The structure pairs a box-type bed with rectangular, wide sliding surfaces.

Source: Okuma America Corporation, September 27, 2026.

What the Okuma MILLAC 1000VH is used for

Okuma names aerospace parts and other work with many machining steps as the MILLAC 1000VH’s target; the 5-axis machine has a swivel spindle, cuts inclined faces with 0.001 degree indexing and works several faces in one chucking.

Source: Okuma America Corporation, October 14, 2026.

Okuma MILLAC 1000VH specifications

Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.

Figures as currently published; an older unit may differ in control generation and options.

Spindle and speed

Max spindle speedSpindle Speed
20~6,000 [100~10,000] min⁻¹
Spindle motor powerSpindle Power
22/18.5 kW (30/25 hp)
Rapid traverseRapid Traverse (X/Y/Z)
24 / 24 / 12 m/min

Table, turret and tools

Table sizeTable Dimensions
1,000 x 1,000 mm (39.37 x 39.37 in)
Max table loadMax Load
2,000 kg (4,400 lbs)

Control

ControlConfiguration the specifications are shown for
OSP-P500

Further figures the manufacturer publishes

Travel X/Y/Z
1,650 / 1,300, / 1,000 [1,650 / 1,600 / 1,000] mm (64.96 / 51.18 / 39.37 [64.96 / 62.99 / 39.37] in)
Rapid Traverse (B-C)
1,440 min⁻¹
  1. manufacturer specification page, fetched October 14, 2026.

What to check on an Okuma MILLAC 1000VH

  • Control generation. The manufacturer specifies OSP-P500 for this model. Units we have tracked run 1998 to 2014; an early one may carry an older control or a retrofit.
  • Spindle. The manufacturer gives a spindle speed of 20~6,000 [100~10,000] min⁻¹. Run the spindle to top speed and listen for bearing noise.
  • Spindle load. The manufacturer gives 22/18.5 kW (30/25 hp) of spindle power. Take a heavy cut and watch the load meter.
  • Rapids and ballscrews. The manufacturer gives a rapid traverse of 24 / 24 / 12 m/min. Measure the backlash on each axis.
  • Table. The manufacturer gives a table size of 1,000 x 1,000 mm (39.37 x 39.37 in) and a table load of 2,000 kg (4,400 lbs). Check the table and its T-slots for damage.

Okuma MILLAC 1000VH control and manuals

  • Control OSP-P500

In a 2024 video, Okuma says its OSP control holds the machine manuals already loaded, so an operator can open them at the machine, and that other PDF files load onto it from a USB drive.

Source: Okuma America, October 24, 2026.

Okuma MILLAC 1000VH listing history

Where it was listed

usedcnc.com
3 listings, 1998–2014
machnet.com
2 listings, 1998
gaec.com
1 listing, 2012
machinetools.com
1 listing

Filed under CNC Vertical Machining Centers (VMC) (5), CNC 5-Axis Machining Centers (1) and CNC Horizontal Machining Centers (HMC) (1).

Model years seen

2014, 2013, 2012, 1998 ×3.

What Okuma MILLAC 1000VH listings agree on

Z-axis travel
39.4 in
Table size
39.37 x 39.37 in
Spindle speed
10,000 RPM (2 machines); 6,000 RPM (2 machines)
Spindle power
30 hp
Tool capacity
120
Machine weight
52,800 lb

What affects the value of a used Okuma MILLAC 1000VH

  • Options. The units we tracked split on spindle speed (10,000 RPM on 2 machines, 6,000 RPM on 2 machines).
  • Control. The manufacturer specifies OSP-P500.
  • Build year. The units we tracked were built from 1998 to 2014, across 4 model years, most often 1998 (3 units).
  • Against the published figures. The manufacturer gives max spindle speed 20~6,000 [100~10,000] min⁻¹, spindle motor power 22/18.5 kW (30/25 hp) and max table load 2,000 kg (4,400 lbs).

Looking for an Okuma MILLAC 1000VH for sale?

We have tracked 7 Okuma MILLAC 1000VH listings on 4 marketplaces (usedcnc.com, machnet.com, gaec.com and machinetools.com), model years 1998 to 2014. We buy Okuma MILLAC 1000VH machines and do not sell them.

2014 · 2013 · 2012 · 1998 · 1998 · 1998 · year not given

Every Okuma MILLAC 1000VH we have tracked

2014 Okuma MILLAC 1000VH

Spindle speed
10,000 RPM

2013 Okuma MILLAC 1000VH (listed as 1000VH)

Spindle speed
10,000 RPM

2012 Okuma MILLAC 1000VH

CNC 5-Axis Machining Centers

1998 Okuma MILLAC 1000VH (listed as 1000VH)

Spindle speed
6,000 RPM

1998 Okuma MILLAC 1000VH

CNC Horizontal Machining Centers (HMC)

1998 Okuma MILLAC 1000VH

Okuma MILLAC 1000VH

Spindle speed
6,000 RPM

The Okuma MILLAC 1000VH among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Okuma machine we track.

Models related to the Okuma MILLAC 1000VH

Okuma MILLAC 852VII

Same series

Other CNC Vertical Machining Centers (VMC) models in this directory

Okuma GENOS M560-V

Units tracked
59
Years seen
2011–2023
Table size
1300 x 560 mm (51.18 x 22.05 in)1this model: 1,000 x 1,000 mm (39.37 x 39.37 in)2

Okuma MU-6300V

Units tracked
4
Years seen
2015–2020
Max table load
600 (1,320)3this model: 2,000 kg (4,400 lbs)2
Control
OSP-P300MA <OSP-P300SA>3this model: OSP-P5002

Haas VF-3

Units tracked
164
Years seen
1993–2024
Max table load
1588 kg (3500 lb)4this model: 2,000 kg (4,400 lbs)2

Okuma GENOS M660-V

Units tracked
2
Years seen
2020–2024

Okuma MA-650VB

Units tracked
9
Years seen
2003–2012
Table size
1,530 × 660 mm5this model: 1,000 x 1,000 mm (39.37 x 39.37 in)2
  1. Okuma GENOS M560-V: manufacturer specification page, fetched October 14, 2026.
  2. Okuma MILLAC 1000VH: manufacturer specification page, fetched October 14, 2026.
  3. Okuma MU-6300V: manufacturer spec sheet (PDF), fetched September 16, 2026.
  4. Haas VF-3: manufacturer specification page, fetched October 14, 2026.
  5. Okuma MA-650VB: manufacturer specification page, fetched October 28, 2026.

Have an Okuma MILLAC 1000VH to sell?

We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.

Get an offer517-514-5190

Tell us what you’re selling

Send us the make and model and we’ll come back with a cash offer. Most sellers hear from us the same business day.

What happens next

  1. Same business dayWe confirm your details and ask anything we’re missing.
  2. Within 24–48 hoursYou receive a purchase proposal.
  3. On your timelineSigned agreement, then we can arrange rigging & pickup.

We only use your details to value your machine and get back to you. No lists, no resale.