Okuma GENOS M560-V

What the maker publishes about the current Okuma GENOS M560-V

The GENOS M560-V is a vertical machining center in the GENOS M series from Okuma. Its frame follows a double-column layout. Maximum machining volume measures 41.34 x 22.05 x 18.11 in across X, Y and Z. The working surface of the table is 51.18 x 22.05 in. A CAT40 BIG-PLUS spindle turns up to 15,000 min⁻¹. Okuma rates the spindle motor at 30/25 hp. Rapid traverse reaches 1,575 ipm on X and Y and 1,262 ipm on Z. Cutting tools sit in a magazine with 32 pockets. The machine follows the Okuma Thermo-Friendly Concept, which targets thermal growth. Its CNC is the open-architecture OSP-P, loaded with the OSP suite of apps. Okuma names titanium and aluminum among the materials it cuts.

Source: Okuma, September 27, 2026.

What the Okuma GENOS M560-V is used for

Okuma presents the GENOS M560-V as a double-column vertical machining center for cutting titanium through aluminum, and its page shows a titanium cutting demonstration.

Source: Okuma America, October 14, 2026.

Okuma GENOS M560-V specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

Okuma GENOS M560-V equipment and options

Options on the 39 Okuma GENOS M560-V units we tracked

• Chip conveyor 6 of 39
• Rotary table (4th axis) 5 of 39
• Tailstock 2 of 39

What to check on an Okuma GENOS M560-V

• Control generation. The manufacturer specifies OSP-P500 for this model. Units we have tracked run 2011 to 2023; an early one may carry an older control or a retrofit.
• Spindle. The manufacturer gives a spindle speed of 15,000 min⁻¹. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 22/18.5 kW (30/25 hp) of spindle power. Take a heavy cut and watch the load meter.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of X-Y 40, Z: 32 m/min (X-Y: 1,575, Z: 1,262 ipm). Measure the backlash on each axis.
• Tool changer. The manufacturer gives the tool capacity as 32 Tools. Cycle every pocket and watch for a hesitation.
• Table. The manufacturer gives a table size of 1300 x 560 mm (51.18 x 22.05 in). Check the table and its T-slots for damage.
• Work envelope. The manufacturer gives max machining volume 1,050 x 560 x 460 mm (41.34 x 22.05 x 18.11 in). Measure your largest part, with its fixture, against that.

Okuma GENOS M560-V control and manuals

• Control OSP-P500

In a 2024 video, Okuma says its OSP control holds the machine manuals already loaded, so an operator can open them at the machine, and that other PDF files load onto it from a USB drive.

Source: Okuma America, October 24, 2026.

Okuma GENOS M560-V listing history

Where it was listed

Filed under CNC Vertical Machining Centers (VMC) (48).

Model years seen

2023 ×4, 2022 ×5, 2021 ×3, 2019 ×6, 2018 ×6, 2017 ×6, 2016 ×4, 2015 ×5, 2014 ×5, 2013 ×8, 2012 ×4, 2011.

What Okuma GENOS M560-V listings agree on

What affects the value of a used Okuma GENOS M560-V

• Options. The units we tracked split on spindle speed (15,000 RPM on 23 machines, 12,000 RPM on 4 machines), spindle power (30 hp on 20 machines, 25 hp on 2 machines) and spindle taper (CAT 40 on 9 machines, CAT 40 Big Plus on 8 machines).
• Control. The manufacturer specifies OSP-P500.
• Build year. The units we tracked were built from 2011 to 2023, across 12 model years, most often 2013 (8 units).
• Against the published figures. The manufacturer gives max spindle speed 15,000 min⁻¹, spindle motor power 22/18.5 kW (30/25 hp) and tool capacity 32 Tools.

Looking for an Okuma GENOS M560-V for sale?

We have tracked 59 Okuma GENOS M560-V listings on 8 marketplaces (surplusrecord.com, machinetools.com, equipt.com, revelationmachinery.com, cncmachines.com, gaec.com, premierequipment.com and usedmachinerysales.com), model years 2011 to 2023. We buy Okuma GENOS M560-V machines and do not sell them.

2023 · 2023 · 2022 · 2022 · 2022 · 2022 · 2021 · 2021 · 2019 · 2019 · 2019 · 2019 · 2018 · 2018 · 2018 · 2018 · 2018 · 2017 · 2017 · 2017 · 2016 · 2016 · 2016 · 2015 · 2015 · 2015 · 2014 · 2014 · 2014 · 2013 · 2013 · 2013 · 2013 · 2013 · 2012 · 2012 · 2011 · year not given

Every Okuma GENOS M560-V we have tracked

14 more Okuma GENOS M560-V machines

1 more listing, no year.

The Okuma GENOS M560-V among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Okuma machine we track.

Models related to the Okuma GENOS M560-V

1. Okuma GENOS M460V-5AX: manufacturer specification page, fetched October 23, 2026.
2. Okuma GENOS M560-V: manufacturer specification page, fetched October 14, 2026.

Other CNC Vertical Machining Centers (VMC) models in this directory

1. Okuma MILLAC 1000VH: manufacturer specification page, fetched October 14, 2026.
2. Okuma GENOS M560-V: manufacturer specification page, fetched October 14, 2026.
3. Okuma MU-6300V: manufacturer spec sheet (PDF), fetched September 16, 2026.
4. Haas VF-3: manufacturer specification page, fetched October 14, 2026.
5. Okuma MA-650VB: manufacturer specification page, fetched October 28, 2026.