2013 Toshiba BTD-110H.R13
CNC Horizontal Boring Mills (HBM) · 2 listings (surplusrecord.com)
CNC Boring Mills
Toshiba BTD-110H.R13
3 Toshiba BTD-110H.R13 listings have come through the used market we track: 2 marketplaces, built 2012–2013; 2 machines once repeats are merged.
63 inX-axis travel
49.2 inY-axis travel
44.5 inZ-axis travel
50 taperSpindle taper
What the maker publishes about the current Toshiba BTD-110H.R13
Toshiba's BTD-110H.R13 sits in the boring machine line-up of the maker, now named Shibaura Machine, on a page shared with the BTD-110H.R16. The page gives its spindle 500 mm (19.7 in) of extension, and an automatic clamp at the spindle end lets the NC hold it at any point along that reach. As standard, linear scales read the X, Y and Z positions and a rotary scale reads B, closing the loop. Indexing the B axis takes 14 sec. through 90° and 37 sec. through a full turn. Air-oil mist lubricates the spindle bearings, and an oil jacket surrounds the head. In a seven hour no-load run at 1000 min-1, the standard spindle drifted -1 μm in X, -14 μm in Y and 23 μm in Z. The page lists a TOSNUC 999 CNC.
Source: Shibaura Machine, October 27, 2026.
What the Toshiba BTD-110H.R13 is used for
Shibaura Machine's page gives the BTD-110H.R13 a spindle laid out for deep hole boring, and shows it in a heavy cut at L/D 3.5 in AISI 1055 carbon steel.
Source: Shibaura Machine, October 27, 2026.
Toshiba BTD-110H.R13 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Control
ControlCNC system
TOSNUC 999
Further figures the manufacturer publishes
spindle extension
500 mm (19.7 in)
B-axis positioning time
14 sec. (0°～90°indexing), 37 sec. (0°～360°indexing)
X-axis direction (7 h at 1000 min-1)
-1 μm (-0.04 μin)
Y-axis direction (7 h at 1000 min-1)
-14μm (-0.55 μin)
Z-axis direction (7 h at 1000 min-1)
23μm (0.91 μin)
- manufacturer specification page, fetched October 27, 2026.
What to check on a Toshiba BTD-110H.R13
- Control generation. The manufacturer specifies TOSNUC 999 for this model. Units we have tracked run 2012 to 2013; an early one may carry an older control or a retrofit.
Toshiba BTD-110H.R13 control
- Control TOSNUC 999
Toshiba BTD-110H.R13 listing history
Where it was listed
surplusrecord.com
2 listings, 2013
usedcnc.com
1 listing, 2012
Sellers also filed it under CNC Horizontal Boring Mills (HBM) (1).
Model years seen
2013 ×2, 2012.
What Toshiba BTD-110H.R13 listings agree on
X-axis travel
63 in
Y-axis travel
49.2 in
Z-axis travel
44.5 in
Spindle taper
50 taper
Tool capacity
38
Looking for a Toshiba BTD-110H.R13 for sale?
We have tracked 3 Toshiba BTD-110H.R13 listings on 2 marketplaces (surplusrecord.com and usedcnc.com), model years 2012 to 2013. We buy Toshiba BTD-110H.R13 machines and do not sell them.
Every Toshiba BTD-110H.R13 we have tracked
2012 Toshiba BTD-110H.R13
CNC Boring Mills
The Toshiba BTD-110H.R13 among machining centers and mills
Browse all CNC Boring Mills, or see every Toshiba machine we track.
Toshiba BTD-110H.R13 variants and related models
Toshiba BTD-110H.R16
Variant
Toshiba BTD-130H.R22
Same series
Have a Toshiba BTD-110H.R13 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
