Okuma V760EX

What the maker publishes about the current Okuma V760EX

Okuma's V760EX is a vertical lathe in the 1SP-V Series, which also lists the V40R, V100R and V920EX. It cuts parts up to Ø760 mm in diameter and 770 mm in length, and its maximum swing is Ø800 mm. The spindle runs from 20 to 2,000 min⁻¹ and is rated 30/22 kW, the first figure for 30 minutes and the second continuous; Okuma also gives this as 40/30 hp. Rapid traverse on X and Z is 24 m/min. Okuma names a milling function, marked M, for this lathe. The base and column are box type, the slideways are large box ways, and the headstock uses a flange construction that Okuma says limits thermal deformation and vibration. A chip conveyor is optional and can discharge to the side or the rear. Besides a swiveling pendant panel, a second operation panel sits on the front skirt, and Okuma lists access to the chuck among the points of its ergonomic layout. Okuma notes that these figures apply to the OSP-P500 configuration.

Source: Okuma, October 27, 2026.

What the Okuma V760EX is used for

The V760EX's vertical layout, says Okuma America's 2021 page, means it can turn thin-walled parts without distorting them, and the same page gives the lathe room for heavy cuts on work up to 29.92 in across and 30.31 in high.

Source: Okuma, an archived copy of the maker's page from 2021, October 28, 2026.

Okuma V760EX specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What to check on an Okuma V760EX

• Spindle. The manufacturer gives a spindle speed of 20~2,000 min⁻¹. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 30/22 kW (30 min/cont.) (30 minute / continuous rating) of spindle power. Take a heavy cut and watch the load meter.
• Bed and ways. The manufacturer gives a max turning diameter of Ø760 mm and a max turning length of 770 mm. Check the ways for wear near the chuck.

Okuma V760EX listing history

Where it was listed

Sellers also filed it under CNC Lathes (1) and CNC Turning Centers (1).

Model years seen

2023 ×2, 2020, 2017.

What Okuma V760EX listings agree on

What affects the value of a used Okuma V760EX

• Build year. The units we tracked were built from 2017 to 2023, across 3 model years, most often 2023 (2 units).
• Against the published figures. The manufacturer gives max spindle speed 20~2,000 min⁻¹, spindle motor power 30/22 kW (30 min/cont.) (30 minute / continuous rating), max turning diameter Ø760 mm and max turning length 770 mm.

Looking for an Okuma V760EX for sale?

We have tracked 5 Okuma V760EX listings on 3 marketplaces (usedcnc.com, machinetools.com and quickmachinerysales.com), model years 2017 to 2023. We buy Okuma V760EX machines and do not sell them.

2023 · 2020 · 2017

Every Okuma V760EX we have tracked

1 more listing, no year.

The Okuma V760EX among lathes and turning centers

Browse all CNC Vertical Turret Lathes (VTL), or see every Okuma machine we track.

Models related to the Okuma V760EX

1. Okuma V100R: manufacturer specification page, fetched October 14, 2026.
2. Okuma V760EX: manufacturer specification page, fetched October 27, 2026.