2012 Okuma V40R
CNC Turning Centers · 2 listings (surplusrecord.com)
CNC Lathes
Okuma V40R
4 Okuma V40R listings have come through the used market we track: 3 marketplaces, built 2012 where given; one early year that only one marketplace reports is left out; 3 machines once repeats are merged.
2,500 RPMSpindle speed
19.69 inSwing
15.75 inMax turning diameter
What the maker publishes about the current Okuma V40R
Okuma's V40R is a vertical turning lathe in its 1SP-V Series, a line that also lists the V100R, V760EX and V920EX. Okuma describes it as a machine for turning thin and odd-shaped workpieces. Maximum cutting diameter is Ø400 mm, maximum cutting length is 450 mm, and the maximum swing is Ø500 mm. The spindle covers 25 to 2,500 min⁻¹, and spindle power is listed as 22/18.5 kW, or 30/25 hp. Both the X and Z axes traverse rapidly at 24 m/min. Its base and column are box type, the slides run on box ways, and the headstock has a flange construction that Okuma says reduces thermal deformation and vibration. Chips can be discharged to the side or to the rear, and a chip conveyor is optional. The operator has a panel on the front skirt as well as a swiveling pendant panel, and Okuma counts access to the chuck among its ergonomic points. The specifications are given for the OSP-P500 configuration.
Source: Okuma, October 27, 2026.
What the Okuma V40R is used for
Okuma's 2006 page fits the V40R into tight floor plans: a two-axis vertical lathe whose tall Z column uses the space overhead and sends cutting heat up away from the part, while chips fall clear past a slanted headstock casting.
Source: Okuma, an archived copy of the maker's page from 2006, October 28, 2026.
Okuma V40R specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
Swing over bedMax Swing
Ø500 mm
Max turning diameterMax Cutting Diameter
Ø400 mm
Max turning lengthMax Cutting Length
450 mm
Spindle and speed
Max spindle speedSpindle Speed
25~2,500 min⁻¹
Spindle motor powerSpindle Power
22/18.5 kW
Further figures the manufacturer publishes
Rapid Traverse (X/Z)
24 m/minX and Z
- manufacturer specification page, fetched October 27, 2026.
What to check on an Okuma V40R
- Spindle. The manufacturer gives a spindle speed of 25~2,500 min⁻¹. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 22/18.5 kW of spindle power. Take a heavy cut and watch the load meter.
- Bed and ways. The manufacturer gives a max turning diameter of Ø400 mm and a max turning length of 450 mm. Check the ways for wear near the chuck.
When the Okuma V40R was built
The V40R had been launched by the fall of 2006, when okuma.com showed it among the single-spindle VR Series vertical lathes in a snapshot the Wayback Machine took on October 23 of that year.
Source: Okuma, an archived copy of the maker's page from 2006, October 28, 2026.
Okuma V40R listing history
Where it was listed
surplusrecord.com
2 listings, 2012
gaec.com
1 listing
machinetools.com
1 listing
Sellers also filed it under CNC Turning Centers (1).
Model years seen
2012 ×2.
What Okuma V40R listings agree on
Swing
19.69 in
Max turning diameter
15.75 in
Spindle speed
2,500 RPM
Looking for an Okuma V40R for sale?
We have tracked 4 Okuma V40R listings on 3 marketplaces (surplusrecord.com, gaec.com and machinetools.com), model year 2012. We buy Okuma V40R machines and do not sell them.
Every Okuma V40R we have tracked
2 more listings gave no year or the early year left out above.
The Okuma V40R among lathes and turning centers
Browse all CNC Lathes, or see every Okuma machine we track.
Models related to the Okuma V40R
Okuma V100R
Same series
- Max turning diameter
- Ø1,000 mm (Ø39.4 in)1this model: Ø400 mm2
- Max turning length
- 890 mm (35.0 in)1this model: 450 mm2
- Okuma V100R: manufacturer specification page, fetched October 14, 2026.
- Okuma V40R: manufacturer specification page, fetched October 27, 2026.
Have an Okuma V40R to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
