Okuma GENOS M460V-5AX

What the maker publishes about the current Okuma GENOS M460V-5AX

Okuma's GENOS M460V-5AX is a 5-axis vertical machining center with a double-column frame and full simultaneous control of all five axes. A trunnion table, driven through a hypoid gear, holds the work on a Ø 400 mm surface. Maximum machining volume is X: 762, Y: 460 and Z: 460 mm. The spindle reaches 15,000 min⁻¹, and its motor is rated 22/18.5 kW (30/25 hp). Rapid traverse is 40 m/min on X and Y and 32 m/min on Z, while the rotary axes rapid at 14,400 deg/min on A and 18,000 deg/min on C. The tool magazine has room for 48 tools. Chips leave the work zone through dual coil chip augers, and the linear axes run on pre-tensioned ballscrews. The machine comes with the OSP suite of apps loaded, and the listed figures apply to the OSP-P500 control configuration.

Source: Okuma, October 23, 2026.

What the Okuma GENOS M460V-5AX is used for

Okuma Europe's launch release says the GENOS M460V-5AX cuts titanium, aluminum and light alloys on work that runs from die and mold parts down to small parts, and it names aerospace components and parts machined on several sides in one chucking.

Source: Okuma Europe, October 27, 2026.

Okuma GENOS M460V-5AX specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 23, 2026.

What to check on an Okuma GENOS M460V-5AX

• Control generation. The manufacturer specifies OSP-P500 for this model. Units we have tracked run 2017 to 2021; an early one may carry an older control or a retrofit.
• Spindle. The manufacturer gives a spindle speed of 15,000 min⁻¹. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 22/18.5 kW of spindle power. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 762 mm, Y 460 mm and Z 460 mm of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of X-Y: 40 m/min, Z: 32 m/min. Measure the backlash on each axis.
• Tool changer. The manufacturer gives the tool capacity as 48. Cycle every pocket and watch for a hesitation.
• Table. The manufacturer gives a table size of Ø 400 mm. Check the table and its T-slots for damage.
• Rotary axes. The manufacturer gives 5 (full 5-axis simultaneous control) axes. Run each rotary axis through its range.

Okuma GENOS M460V-5AX control and manuals

• Control OSP-P500 (the configuration the published figures are for)

In a 2024 video, Okuma says its OSP control holds the machine manuals already loaded, so an operator can open them at the machine, and that other PDF files load onto it from a USB drive.

Source: Okuma America, October 24, 2026.

When the Okuma GENOS M460V-5AX was built

Okuma America's 2022 release for the GENOS M560V-5AX says the GENOS M460V-5AX was launched in 2017 as a compact 5-axis vertical machine, and that the newer M560V-5AX was developed from it.

Source: Okuma America, October 27, 2026.

Okuma GENOS M460V-5AX listing history

Where it was listed

Filed under CNC 5-Axis Machining Centers (6) and CNC Vertical Machining Centers (VMC) (4).

Model years seen

2021 ×2, 2019, 2018 ×6, 2017.

What Okuma GENOS M460V-5AX listings agree on

What affects the value of a used Okuma GENOS M460V-5AX

• Options. The units we tracked split on tool capacity (48 on 3 machines, 32 on 3 machines).
• Control. The manufacturer specifies OSP-P500.
• Build year. The units we tracked were built from 2017 to 2021, across 4 model years, most often 2018 (6 units).
• Against the published figures. The manufacturer gives max spindle speed 15,000 min⁻¹, spindle motor power 22/18.5 kW, tool capacity 48 and X-axis travel 762 mm.

Looking for an Okuma GENOS M460V-5AX for sale?

We have tracked 14 Okuma GENOS M460V-5AX listings on 6 marketplaces (machinetools.com, surplusrecord.com, exapro.com, revelationmachinery.com, cncmachines.com and quickmachinerysales.com), model years 2017 to 2021. We buy Okuma GENOS M460V-5AX machines and do not sell them.

2021 · 2019 · 2018 · 2018 · 2018 · 2018 · 2018 · 2017 · year not given · year not given

Every Okuma GENOS M460V-5AX we have tracked

1 more listing, no year.

The Okuma GENOS M460V-5AX among machining centers and mills

Browse all CNC 5-Axis Machining Centers, or see every Okuma machine we track.

Models related to the Okuma GENOS M460V-5AX

1. Okuma GENOS M560-V: manufacturer specification page, fetched October 14, 2026.
2. Okuma GENOS M460V-5AX: manufacturer specification page, fetched October 23, 2026.