Okuma 2SP-35HG

What the maker publishes about the current Okuma 2SP-35HG

Two spindles and two turrets define Okuma's 2SP-35HG, which Okuma files with its 2SP-H/HG horizontal CNC lathes and covers in a short table of highlighted specs. Its standard chuck is 10 in. Work can be turned to 11.02 in across and 9.06 in long. On the left and on the right sits a V12 turret, and each spindle has a motor of its own, rated 25 hp for 30 minutes and 20 hp continuous. The machine needs 125.98 in of width and 111.61 in of depth, and its overall height is 159.53 in. Okuma's table marks the M spec extension, meaning milling, for this model, and gives the control as either Okuma's OSP or a FANUC unit.

Source: Okuma, October 27, 2026.

Okuma 2SP-35HG specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What fits an Okuma 2SP-35HG

Each of these follows from a published specification above, which is named beside it.

What to check on an Okuma 2SP-35HG

• Control generation. The manufacturer specifies OSP / FANUC for this model. Units we have tracked run 2005 to 2011; an early one may carry an older control or a retrofit.
• Spindle load. The manufacturer gives 18.5/15 kW (30 min/cont) × 2 (30 min / continuous, two motors) of spindle power. Take a heavy cut and watch the load meter.
• Turret. The manufacturer gives the turret stations as L/R: V12. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 10 in. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 280 mm and a max turning length of 230 mm. Check the ways for wear near the chuck.
• Rotary tools. The manufacturer gives the rotary tooling as M (milling) (spec extension). Check that the rotary tools still drive under load.
• Rigging and floor. The manufacturer gives a floor space of 3,200 × 2,835 mm. Confirm the rigging route and the floor will take that.

Okuma 2SP-35HG control and manuals

• Control OSP / FANUC

In a 2024 video, Okuma says its OSP control holds the machine manuals already loaded, so an operator can open them at the machine, and that other PDF files load onto it from a USB drive.

Source: Okuma America, October 24, 2026.

Okuma 2SP-35HG listing history

Where it was listed

Filed under CNC Lathes (6) and CNC Turning Centers (1).

Model years seen

2011 ×2, 2006 ×2, 2005 ×2.

What Okuma 2SP-35HG listings agree on

What affects the value of a used Okuma 2SP-35HG

• Control. The manufacturer specifies OSP / FANUC.
• Build year. The units we tracked were built from 2005 to 2011, across 3 model years.
• Against the published figures. The manufacturer gives spindle motor power 18.5/15 kW (30 min/cont) × 2 (30 min / continuous, two motors), turret stations L/R: V12, chuck size 10 in and max turning diameter 280 mm.

Looking for an Okuma 2SP-35HG for sale?

We have tracked 8 Okuma 2SP-35HG listings on 4 marketplaces (machinetools.com, surplusrecord.com, usedcnc.com and usedmachinerysales.com), model years 2005 to 2011. We buy Okuma 2SP-35HG machines and do not sell them.

2011 · 2006 · 2005

Every Okuma 2SP-35HG we have tracked

2 more listings, no year.

The Okuma 2SP-35HG among lathes and turning centers

Browse all CNC Lathes, or see every Okuma machine we track.

Other CNC Lathes models in this directory