Nakamura-Tome WT-100

What the maker publishes about the current Nakamura-Tome WT-100

Nakamura-Tome places the WT-100 among its two-turret, two-spindle machines: a compact multitasking lathe with left and right spindles facing each other, on which upper and lower tools can cut at the same time. Bar work reaches 42mm, and the chuck size is 6″. Turning diameter is 190mm and turning length 503mm. Both spindles run at 6,000 min-1, each driven by an 11/7.5kW motor, and the maker notes that turning power climbs to 22 kW when a shaft is held between the two. Two milling motors of 7.1/2.2kW drive the rotary tools. With multi-tool holders and turret indexing at mid positions, as many as 48 tools can be mounted. The page lists oscillation cutting as applicable, and 3D SmartPro AI and GeoNavi among the functions the model takes. Installed, the machine is 2,630mm wide, 1,923mm deep and 1,940mm tall.

Source: Nakamura-Tome, October 27, 2026.

What the Nakamura-Tome WT-100 is used for

Nakamura-Tome pitches the WT-100 at milling with small tools and at shaft work, where a part clamped between both spindles gets up to 22 kW of turning power.

Source: Nakamura-Tome, October 27, 2026.

Nakamura-Tome WT-100 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What fits a Nakamura-Tome WT-100

Each of these follows from a published specification above, which is named beside it.

What to check on a Nakamura-Tome WT-100

• Spindle. The manufacturer gives a spindle speed of 6,000min -1. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 11/7.5kW (left and right spindles each) of spindle power. Take a heavy cut and watch the load meter.
• Tool changer. The manufacturer gives the tool capacity as 48 tools (up to, with multi-tool holders). Cycle every pocket and watch for a hesitation.
• Chuck and bar. The manufacturer gives a chuck size of 6″ and a bar capacity of 42mm. Check the jaws and the grip pressure; check any bar feeder is set for that bar.
• Bed and ways. The manufacturer gives a max turning diameter of 190mm and a max turning length of 503mm. Check the ways for wear near the chuck.
• Rigging and floor. The manufacturer gives a floor space of height:1,940mm / width:2,630mm / depth:1,923mm. Confirm the rigging route and the floor will take that.

Nakamura-Tome WT-100 listing history

Where it was listed

Sellers also filed it under Tome-CNC Lathes (1).

Model years seen

2019, 2017, 2006 ×2.

What Nakamura-Tome WT-100 listings agree on

What affects the value of a used Nakamura-Tome WT-100

• Build year. The units we tracked were built from 2006 to 2019, across 3 model years, most often 2006 (2 units).
• Against the published figures. The manufacturer gives max spindle speed 6,000min -1, spindle motor power 11/7.5kW (left and right spindles each), tool capacity 48 tools (up to, with multi-tool holders) and chuck size 6″.

Looking for a Nakamura-Tome WT-100 for sale?

We have tracked 5 Nakamura-Tome WT-100 listings on 3 marketplaces (exapro.com, equipt.com and machnet.com), model years 2006 to 2019. We buy Nakamura-Tome WT-100 machines and do not sell them.

2019 · 2017 · 2006 · 2006

Every Nakamura-Tome WT-100 we have tracked

1 more listing, no year.

The Nakamura-Tome WT-100 among lathes and turning centers

Browse all CNC Lathes, or see every Nakamura-Tome machine we track.

Models related to the Nakamura-Tome WT-100