Doosan LYNX 300M

What the maker publishes about the current Doosan LYNX 300M

DN Solutions gives its Lynx 300M a rotary tool speed of 5000 r/min, a row the maker leaves empty for the plain Lynx 300, its neighbor in the same Lynx 210/220 spec table. Both are horizontal turning centers, and on the 300M the turret mounts up to 12 tools around a 10 inch chuck. Work can be turned to 370 mm (15 inch) across and 712 mm (28 inch) long. The main spindle, driven at 15 kW, has a ceiling of 3500 r/min, and its torque peaks at 190 N·m, or 140 ft-lb. Slide movement amounts to 255 mm for X and 790 mm for Z, and in rapid mode those axes cover 945 ipm and 1181 ipm. Expressed in inches, the frame is 119 inch in length, 70 inch in width and 67 inch in height. Its mass is put at 4050 kg (8929 lb).

Source: DN Solutions, October 27, 2026.

What the Doosan LYNX 300M is used for

Sharing the 10 inch top of DN Solutions' Korean Lynx 210/220 table with the plain Lynx 300, the 300M adds driven tools at 5,000 r/min to its 12 station turret, for turned and milled parts up to 370 mm across and 712 mm long over 790 mm of Z travel.

Source: DN Solutions, October 27, 2026.

Doosan LYNX 300M specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What fits a Doosan LYNX 300M

Each of these follows from a published specification above, which is named beside it.

What to check on a Doosan LYNX 300M

• Spindle. The manufacturer gives a spindle speed of 3500 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 15 kW of spindle power and 190 N·m of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 255 mm and Z 790 mm of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 24 m/min. Measure the backlash on each axis.
• Turret. The manufacturer gives the turret stations as 12 ea. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 10 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 370 mm and a max turning length of 712 mm. Check the ways for wear near the chuck.
• Rigging and floor. The manufacturer gives a machine weight of 4050 kg, a 길이 of 3035 mm, a 폭 of 1785 mm and a 높이 of 1707 mm. Confirm the rigging route and the floor will take that.

Doosan LYNX 300M listing history

Where it was listed

Model years seen

2014, 2013 ×2, 2011 ×2.

What Doosan LYNX 300M listings agree on

What affects the value of a used Doosan LYNX 300M

• Build year. The units we tracked were built from 2011 to 2014, across 3 model years.
• Against the published figures. The manufacturer gives max spindle speed 3500 r/min, spindle motor power 15 kW, turret stations 12 ea and chuck size 10 inch.

Looking for a Doosan LYNX 300M for sale?

We have tracked 6 Doosan LYNX 300M listings on 3 marketplaces (exapro.com, machinetools.com and usedmachinerysales.com), model years 2011 to 2014. We buy Doosan LYNX 300M machines and do not sell them.

2014 · 2013 · 2013 · 2011 · 2011

Every Doosan LYNX 300M we have tracked

1 more listing, no year.

The Doosan LYNX 300M among lathes and turning centers

Browse all CNC Lathes, or see every Doosan machine we track.

Doosan LYNX 300M variants and related models

1. Doosan LYNX 2100A: manufacturer specification page, fetched October 14, 2026.
2. Doosan LYNX 300M: manufacturer specification page, fetched October 27, 2026.