2022 Doosan LYNX 2100A (listed as 2100A)
Used · CNC Lathes
Chuck size
8 in
CNC Lathes
Doosan LYNX 2100A
12 Doosan LYNX 2100A listings have come through the used market we track on 5 marketplaces, built from 2016 to 2022 where the listing gave a year. Listings that repeat the same machine are shown once, as 10 machines.
350 mmMax turning diameter
6,000 RPMSpindle speed
8.1 inX-axis travel
15 kWSpindle power
What the maker publishes about the current Doosan LYNX 2100A
The Lynx 2100A belongs to the compact 2-axis horizontal Lynx 2100/2600 series from DN Solutions and takes a 6 inch chuck. Turning reaches 350 mm (14 inch) in diameter. The cut can run 330 mm (13 inch) along the part. The X-axis has 205 mm of travel. Z travel is 340 mm. X rapids at 30 m/min, while Z rapids at 36 m/min. In imperial terms those rates are 1181 ipm and 1417 ipm. Top spindle speed is 6000 r/min. A 15 kW (20 hp) motor turns it. Peak spindle torque is 127 N·m, equal to 94 ft-lb. A servo drives the 12-station turret. Full covers over the slideways keep leakage and chips out. Lubrication is by grease. A dual-purpose chip conveyor mounts at the rear. The machine takes up 2320 mm by 1595 mm of floor and is 1693 mm tall. Weight totals 3100 kg (6834 lb).
Source: DN Solutions, September 27, 2026.
Doosan LYNX 2100A listing history
Where it was listed
surplusrecord.com
5 listings, model years 2016 to 2022
exapro.com
3 listings, model years 2018 to 2021
usedcnc.com
2 listings, model year 2017
machinetools.com
1 listing
theequipmenthub.com
1 listing, model year 2018
Model years seen
2022 (2 units), 2021, 2020, 2018 (2 units), 2017 (2 units), 2016 (2 units).
What Doosan LYNX 2100A listings agree on
X-axis travel
8.1 in
Z-axis travel
13.4 in
Swing
23 in
Max turning diameter
350 mm
Max turning length
13 in
Chuck size
6 in (3 machines); 8 in (2 machines)
Bar capacity
2 in
Spindle speed
6,000 RPM
Spindle power
15 kW
Machine weight
6,834 lb
Every Doosan LYNX 2100A we have tracked
2022 Doosan LYNX 2100A
Used · Metal Cutting
2021 Doosan LYNX 2100A
Used · Metal Cutting
2020 Doosan LYNX 2100A
Used · CNC Lathes
2018 Doosan LYNX 2100A
Used · Metal Cutting
2018 Doosan LYNX 2100A
Used · CNC Lathes
2017 Doosan LYNX 2100A
Used · Metal Cutting · Listed 2 times (usedcnc.com)
Chuck size
6 in
2016 Doosan LYNX 2100A
Used · Metal Cutting · Listed 2 times (surplusrecord.com)
Chuck size
6 in
Doosan LYNX 2100A
Used · CNC Lathes
Chuck size
8 in
Doosan LYNX 2100A
Used · CNC Lathes
Chuck size
6 in
The Doosan LYNX 2100A among lathes and turning centers
Browse all CNC Lathes, or see every Doosan machine we track.
Other CNC Lathes models in this directory
Doosan Puma GT3100
- Units tracked
- 14
- Years seen
- 2016 to 2022
Doosan SMX 3100LS
- Units tracked
- 5
- Years seen
- 2018
Doosan PUMA 4100B
- Units tracked
- 11
- Years seen
- 2015 to 2020
Have a Doosan LYNX 2100A to sell?
We are the buyer, not a broker. No listing fee, no commission, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, we handle rigging and freight, and we arrange the pickup.