Doosan LYNX-220A

What the maker publishes about the current Doosan LYNX-220A

DN Solutions builds the Lynx 220A, a horizontal turning center with two axes, in its Lynx 210/220 series, a range the maker spans across 6, 8 and 10 inch chucks. This version carries a 6 inch chuck. Work as large as 320 mm across and 322 mm long fits within its turning envelope. The cross slide gives 175 mm of X travel, while the Z axis covers 330 mm. Rapid moves run at 30 m/min in X and 36 m/min in Z. Spindle speed is limited to 6000 r/min, the motor is rated at 15 kW and peak torque reaches 95.5 N·m. Twelve tools can be mounted on the turret. By the maker's dimension table, the machine occupies 2327 mm in length and 1620 mm in width, rises 1655 mm and has a weight of 2900 kg.

Source: DN Solutions, October 26, 2026.

What the Doosan LYNX-220A is used for

DN Solutions' Korean page gives the Lynx 220A the 6 inch chuck of its Lynx 210/220 line, which it calls compact, entry-level horizontal lathes in the 6 to 10 inch class, and notes the line can be expanded into an automation setup.

Source: DN Solutions, October 26, 2026.

Doosan LYNX-220A specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 26, 2026.

What fits a Doosan LYNX-220A

Each of these follows from a published specification above, which is named beside it.

Doosan LYNX-220A equipment and options

Options on the 16 Doosan LYNX-220A units we tracked

• Tailstock 3 of 16
• Parts catcher 2 of 16

What to check on a Doosan LYNX-220A

• Spindle. The manufacturer gives a spindle speed of 6000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 15 kW of spindle power and 95.5 N·m of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 175 mm and Z 330 mm of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 30 m/min. Measure the backlash on each axis.
• Turret. The manufacturer gives the turret stations as 12 ea. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 6 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 320 mm and a max turning length of 322 mm. Check the ways for wear near the chuck.
• Rigging and floor. The manufacturer gives a machine weight of 2900 kg, a 길이 (length) of 2327 mm, a 폭 (width) of 1620 mm and a 높이 (height) of 1655 mm. Confirm the rigging route and the floor will take that.

Doosan LYNX-220A listing history

Where it was listed

Sellers also listed it as PUMA LYNX 220 A.

Filed under CNC Lathes (16) and CNC Turning Centers (2).

Model years seen

2016 ×2, 2014, 2013 ×2, 2012 ×2, 2011 ×2, 2008 ×3, 2007 ×4, 2006 ×2, 2005 ×2.

What Doosan LYNX-220A listings agree on

What affects the value of a used Doosan LYNX-220A

• Options. The units we tracked split on chuck size (6 in on 5 machines, 6.5 in on 2 machines).
• Build year. The units we tracked were built from 2005 to 2016, across 9 model years, most often 2007 (4 units).
• Against the published figures. The manufacturer gives max spindle speed 6000 r/min, spindle motor power 15 kW, turret stations 12 ea and chuck size 6 inch.

Looking for a Doosan LYNX-220A for sale?

We have tracked 21 Doosan LYNX-220A listings on 5 marketplaces (surplusrecord.com, machinetools.com, usedmachinerysales.com, exapro.com and revelationmachinery.com), model years 2005 to 2016. We buy Doosan LYNX-220A machines and do not sell them.

2016 · 2014 · 2013 · 2012 · 2011 · 2011 · 2008 · 2008 · 2007 · 2007 · 2007 · 2007 · 2006 · 2005 · 2005 · year not given

Every Doosan LYNX-220A we have tracked

The Doosan LYNX-220A among lathes and turning centers

Browse all CNC Lathes, or see every Doosan machine we track.

Doosan LYNX-220A variants and related models

1. Doosan LYNX-210A: manufacturer specification page, fetched October 27, 2026.
2. Doosan LYNX-220A: manufacturer specification page, fetched October 26, 2026.