Doosan LYNX-210A

What the maker publishes about the current Doosan LYNX-210A

On the Lynx 210A, DN Solutions runs every axis on box guideways, a construction it names for the Lynx 210 specifically. The machine, a 2-axis horizontal turning center, belongs to the Lynx 210/220 range. Chucks for this model are 6 inch. Turned parts top out at 280 mm in diameter and 280 mm in length. Its 95.5 N·m of spindle torque comes from a 15 kW drive, with speed capped at 6000 r/min. X moves 160 mm and Z moves 330 mm; the rapid rates on those axes are 20 m/min and 24 m/min, or 787 and 945 ipm. Up to 10 tools fit in the turret. It occupies a floor area of 1973 mm by 1590 mm, stands 1657 mm high and weighs 3170 kg (6989 lb).

Source: DN Solutions, October 27, 2026.

What the Doosan LYNX-210A is used for

DN Solutions' Korean page frames the Lynx 210/220 range as entry-level compact lathes taking 6, 8 or 10 inch chucks, with room to grow into an automated setup; the 210A, the 6 inch Lynx 210, rides box guideways on every axis and turns work up to 280 mm across and 280 mm long.

Source: DN Solutions, October 27, 2026.

Doosan LYNX-210A specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What fits a Doosan LYNX-210A

Each of these follows from a published specification above, which is named beside it.

What to check on a Doosan LYNX-210A

• Spindle. The manufacturer gives a spindle speed of 6000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 15 kW of spindle power and 95.5 N·m of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 160 mm and Z 330 mm of travel. Run each axis end to end and check the way covers.
• Turret. The manufacturer gives the turret stations as 10 ea. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 6 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 280 mm and a max turning length of 280 mm. Check the ways for wear near the chuck.
• Rigging and floor. The manufacturer gives a machine weight of 3170 kg, a 길이 of 1973 mm, a 폭 of 1590 mm and a 높이 of 1657 mm. Confirm the rigging route and the floor will take that.

Doosan LYNX-210A listing history

Where it was listed

Sellers also filed it under CNC Turning Centers (1).

Model years seen

2004 ×3, 2003.

What Doosan LYNX-210A listings agree on

What affects the value of a used Doosan LYNX-210A

• Build year. The units we tracked were built from 2003 to 2004, across 2 model years, most often 2004 (3 units).
• Against the published figures. The manufacturer gives max spindle speed 6000 r/min, spindle motor power 15 kW, turret stations 10 ea and chuck size 6 inch.

Looking for a Doosan LYNX-210A for sale?

We have tracked 6 Doosan LYNX-210A listings on 1 marketplace (surplusrecord.com), model years 2003 to 2004. We buy Doosan LYNX-210A machines and do not sell them.

2004 · 2004 · 2003

Every Doosan LYNX-210A we have tracked

2 more listings gave the early year left out above.

The Doosan LYNX-210A among lathes and turning centers

Browse all CNC Lathes, or see every Doosan machine we track.

Models related to the Doosan LYNX-210A

1. Doosan LYNX-220A: manufacturer specification page, fetched October 26, 2026.
2. Doosan LYNX-210A: manufacturer specification page, fetched October 27, 2026.