CNC Horizontal Machining Centers (HMC)
Doosan HM 1250
19 Doosan HM 1250 listings have come through the used market we track: 5 marketplaces, built 2009–2018 where given; 12 machines once repeats are merged.
6,000 RPMSpindle speed
82.67 inX-axis travel
59.5 inY-axis travel
59.5 inZ-axis travel
What the maker publishes about the current Doosan HM 1250
DN Solutions builds the HM 1250 as a horizontal machining center in its HM series, which the maker presents as box guideway machines for large components. The X axis travels 2100 mm, and the Y and Z axes each travel 1500 mm, or 83, 59 and 59 inch. All three axes rapid at 24 m/min (945 ipm). Parts load on a 1250x1250 mm pallet, and the maximum workpiece weight is 3000 kg. The spindle takes ISO #50 tooling and runs to 6000 r/min, with 8000 r/min printed in braces as an option. Spindle power is listed as 26/22 kW, and 37/30 kW is the optional rating. Tool storage has 60 stations. Among the HM series highlights, DN Solutions names a gearbox-driven spindle and a shuttle-type pallet changer. In the dimensions table the machine is 10530 mm long, 5822 mm wide and 4130 mm high, and it weighs 31000 kg.
Source: DN Solutions, October 23, 2026.
What the Doosan HM 1250 is used for
DN Solutions' oil and gas page names the HM 1000, HM 1250 and HM 1250W for surface machining and hole making on wellhead and blowout preventer parts, which it describes as large, heavy parts cut from tough materials.
Source: DN Solutions, October 27, 2026.
Doosan HM 1250 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX-Axis Travel Distance
2100 mm
Y-axis travelY-Axis Travel Distance
1500 mm
Z-axis travelZ-Axis Travel Distance
1500 mm
Spindle and speed
Max spindle speedMax. Spindle Speed
6000 r/minstandard; {8000} r/min printed in braces as the option
Spindle motor powerMax. Spindle Power
26/22 kWstandard; {37/30} kW printed in braces as the option
Spindle taperTool Taper
ISO #50
Rapid traverseX-/Y-/Z-Axis Rapid Traverse
24 m/minX, Y and Z
Table, turret and tools
Max table loadMaximum Workpiece weight
3000 kg
Pallet sizePallet Size
1250x1250 mm
Tool capacityNo. of tool station
60 ea
Dimensions and weight
Machine weightWeight
31000 kg
Further figures the manufacturer publishes
Max. Spindle Speed (value in braces)
8000 r/minoption
Length
10530 mm
Height
4130 mm
Width
5822 mm
- manufacturer specification page, fetched October 23, 2026.
What fits a Doosan HM 1250
Each of these follows from a published specification above, which is named beside it.
50-taper toolholders
This is a 50-taper spindle — the 7:24 steep taper that CAT-50, BT-50 and DIN 69871 (SK-50) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed.
Derived from Spindle taper: ISO #50
Pallets and fixturing
Fixtures, tombstones and spare pallets are cut for a pallet of this size and do not transfer to another machine. On a horizontal they are a large share of what is being sold, so count them before quoting.
Derived from Pallet size: 1250x1250 mm
What to check on a Doosan HM 1250
- Spindle. The manufacturer gives a spindle speed of 6000 r/min (standard; {8000} r/min printed in braces as the option). Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 26/22 kW (standard; {37/30} kW printed in braces as the option) of spindle power. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of ISO #50. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 2100 mm, Y 1500 mm and Z 1500 mm of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 24 m/min (X, Y and Z). Measure the backlash on each axis.
- Tool changer. The manufacturer gives the tool capacity as 60 ea. Cycle every pocket and watch for a hesitation.
- Pallet changer. The manufacturer gives a pallet size of 1250x1250 mm. Run a full pallet change, and count the pallets and fixtures that come with the machine.
- Table. The manufacturer gives a table load of 3000 kg. Check the table and its T-slots for damage.
- Rigging and floor. The manufacturer gives a machine weight of 31000 kg, a length of 10530 mm, a width of 5822 mm and a height of 4130 mm. Confirm the rigging route and the floor will take that.
Doosan HM 1250 listing history
Where it was listed
usedcnc.com
11 listings, 2009–2017
exapro.com
2 listings
machinetools.com
2 listings, 2015–2018
surplusrecord.com
2 listings, 2016
usedmachinerysales.com
2 listings, 2017
Filed under CNC Horizontal Machining Centers (HMC) (14).
Model years seen
2018, 2017 ×4, 2016 ×2, 2015 ×2, 2014 ×2, 2012 ×2, 2011 ×3, 2009.
What Doosan HM 1250 listings agree on
X-axis travel
82.67 in
Y-axis travel
59.5 in
Z-axis travel
59.5 in
Spindle speed
6,000 RPM
Spindle power
40 hp (4 machines); 35 hp (3 machines)
Spindle taper
CAT 50 Big Plus (4 machines); CAT 50 (3 machines)
Tool capacity
60 (5 machines); 90 (3 machines)
Machine weight
76,800 lb
What affects the value of a used Doosan HM 1250
- Options. The units we tracked split on spindle power (40 hp on 4 machines, 35 hp on 3 machines), spindle taper (CAT 50 Big Plus on 4 machines, CAT 50 on 3 machines) and tool capacity (60 on 5 machines, 90 on 3 machines).
- Build year. The units we tracked were built from 2009 to 2018, across 8 model years, most often 2017 (4 units).
- Against the published figures. The manufacturer gives max spindle speed 6000 r/min (standard; {8000} r/min printed in braces as the option), spindle motor power 26/22 kW (standard; {37/30} kW printed in braces as the option), tool capacity 60 ea and X-axis travel 2100 mm.
Looking for a Doosan HM 1250 for sale?
We have tracked 19 Doosan HM 1250 listings on 5 marketplaces (usedcnc.com, exapro.com, machinetools.com, surplusrecord.com and usedmachinerysales.com), model years 2009 to 2018. We buy Doosan HM 1250 machines and do not sell them.
2018 · 2017 · 2017 · 2017 · 2016 · 2015 · 2014 · 2012 · 2011 · 2011 · 2009 · year not given
Every Doosan HM 1250 we have tracked
2017 Doosan HM 1250
2 listings (usedcnc.com)
Spindle power
40 hp
Spindle taper
CAT 50 Big Plus
2017 Doosan HM 1250
2017 Doosan HM 1250
Spindle power
35 hp
Tool capacity
60
2016 Doosan HM 1250
Metal Cutting · 2 listings (surplusrecord.com)
Spindle power
35 hp
Spindle taper
CAT 50
Tool capacity
90
2015 Doosan HM 1250
2 listings (machinetools.com, usedcnc.com)
Spindle taper
CAT 50 Big Plus
Tool capacity
90
2014 Doosan HM 1250
Metal Cutting · 2 listings (usedcnc.com)
Spindle power
40 hp
Tool capacity
60
2012 Doosan HM 1250
Metal Cutting · 2 listings (usedcnc.com)
Spindle taper
CAT 50 Big Plus
Tool capacity
90
2011 Doosan HM 1250
Metal Cutting · 2 listings (usedcnc.com)
Spindle power
40 hp
Tool capacity
60
2011 Doosan HM 1250
Spindle power
40 hp
Spindle taper
CAT 50 Big Plus
Tool capacity
60
2009 Doosan HM 1250
Spindle power
35 hp
Spindle taper
CAT 50
Tool capacity
60
Doosan HM 1250
Metal Cutting · 2 listings (exapro.com)
Spindle taper
CAT 50
The Doosan HM 1250 among machining centers and mills
Browse all CNC Horizontal Machining Centers (HMC), or see every Doosan machine we track.
Models related to the Doosan HM 1250
Doosan HM1000
Same series
Have a Doosan HM 1250 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
