Doosan DNM 6700

What the maker publishes about the current Doosan DNM 6700

DN Solutions places the DNM 6700 in its DNM series of vertical machining centers. Travel is 1300 mm on X, 670 mm on Y and 625 mm on Z, printed in imperial as 51, 26 and 25 inch. X and Y rapid at 36 m/min and Z at 30 m/min, which the imperial table gives as 1417 and 1181 ipm. The spindle reaches 8000 r/min on 18.5 kW (25 hp) and develops up to 117.8 N·m (87 ft-lb) of torque. Tooling is ISO #40 with a 7/24 taper. The table is 1500 mm long and 670 mm wide, and it carries workpieces up to 1300 kg (2866 lb). Overall the machine measures 2597 mm in length, 3350 mm in width and 3120 mm in height. It weighs 8500 kg, which is 18739 lb.

Source: DN Solutions, October 23, 2026.

What the Doosan DNM 6700 is used for

DN Solutions' automotive page lists the DNM 6700, 6700L and 6700XL among its DNM series machines for electric vehicle battery pack cases, motor reducer housings, inverter cases and support rings.

Source: DN Solutions, October 27, 2026.

Doosan DNM 6700 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 23, 2026.

What to check on a Doosan DNM 6700

• Spindle. The manufacturer gives a spindle speed of 8000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 18.5 kW of spindle power and 117.8 N·m of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 1300 mm, Y 670 mm and Z 625 mm of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 36/36/30 m/min (X/Y/Z). Measure the backlash on each axis.
• Table. The manufacturer gives a table size of 1500 mm x 670 mm and a table load of 1300 kg. Check the table and its T-slots for damage.
• Rigging and floor. The manufacturer gives a machine weight of 8500 kg, a length of 2597 mm, a width of 3350 mm and a height of 3120 mm. Confirm the rigging route and the floor will take that.

Doosan DNM 6700 listing history

Where it was listed

Filed under CNC Vertical Machining Centers (VMC) (12).

Model years seen

2023 ×2, 2021, 2020, 2019 ×2, 2018 ×2, 2017 ×2, 2016 ×2, 2015.

What Doosan DNM 6700 listings agree on

What affects the value of a used Doosan DNM 6700

• Build year. The units we tracked were built from 2015 to 2023, across 8 model years.
• Against the published figures. The manufacturer gives max spindle speed 8000 r/min, spindle motor power 18.5 kW, X-axis travel 1300 mm and Y-axis travel 670 mm.

Looking for a Doosan DNM 6700 for sale?

We have tracked 13 Doosan DNM 6700 listings on 5 marketplaces (exapro.com, machinetools.com, surplusrecord.com, usedmachinerysales.com and vigert.com), model years 2015 to 2023. We buy Doosan DNM 6700 machines and do not sell them.

2023 · 2021 · 2020 · 2019 · 2018 · 2017 · 2016 · 2015

Every Doosan DNM 6700 we have tracked

The Doosan DNM 6700 among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Doosan machine we track.

Models related to the Doosan DNM 6700

1. Doosan DNM 5700: manufacturer specification page, fetched October 23, 2026.
2. Doosan DNM 6700: manufacturer specification page, fetched October 23, 2026.