CNC Vertical Machining Centers (VMC)
Doosan DNM 5700
20 Doosan DNM 5700 listings have come through the used market we track: 7 marketplaces, built 2012–2025 where given; 12 machines once repeats are merged.
1,050 mmX-axis travel
570 mmY-axis travel
30Tool capacity
510 mmZ-axis travel
What the maker publishes about the current Doosan DNM 5700
DN Solutions builds the DNM 5700 as a vertical machining center within its DNM series. Its axes travel 1050 mm in X, 570 mm in Y and 510 mm in Z, which the maker also prints as 41, 22 and 20 inch. Rapid traverse is 36 m/min along X and Y and 30 m/min along Z, or 1417 and 1181 ipm. The spindle uses an ISO #40 tool taper and runs to 8000 r/min. Maximum spindle power is 18.5 kW (25 hp), and peak torque is 117.8 N·m (87 ft-lb). The table measures 1300 mm by 570 mm and accepts workpieces weighing up to 1000 kg (2205 lb). The machine itself weighs 6500 kg, listed as 14330 lb in imperial units.
Source: DN Solutions, October 23, 2026.
What the Doosan DNM 5700 is used for
DN Solutions' automotive page names the DNM 5700 for machining differential cases, and lists the DNM 5700 and 5700L among its DNM series picks for electric vehicle battery pack cases, motor reducer housings and support rings.
Source: DN Solutions, October 27, 2026.
Doosan DNM 5700 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX-Axis Travel Distance
1050 mm
Y-axis travelY-Axis Travel Distance
570 mm
Z-axis travelZ-Axis Travel Distance
510 mm
Spindle and speed
Max spindle speedMax. Spindle Speed
8000 r/min
Spindle motor powerMax. Spindle Power
18.5 kW
Spindle taperTool Taper
ISO #40
Rapid traverseX-/Y-/Z-Axis Rapid Traverse
36/36/30 m/minX/Y/Z
Table, turret and tools
Table sizeTable Length x Table Width
1300 mm x 570 mm
Max table loadMaximum Workpiece weight
1000 kg
Dimensions and weight
Machine weightWeight
6500 kg
Further figures the manufacturer publishes
Max. Spindle Torque
117.8 N·m
- manufacturer specification page, fetched October 23, 2026.
What fits a Doosan DNM 5700
Each of these follows from a published specification above, which is named beside it.
40-taper toolholders
This is a 40-taper spindle — the 7:24 steep taper that CAT-40, BT-40 and DIN 69871 (SK-40) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed.
Derived from Spindle taper: ISO #40
What to check on a Doosan DNM 5700
- Spindle. The manufacturer gives a spindle speed of 8000 r/min. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 18.5 kW of spindle power and 117.8 N·m of spindle torque. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of ISO #40. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 1050 mm, Y 570 mm and Z 510 mm of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 36/36/30 m/min (X/Y/Z). Measure the backlash on each axis.
- Table. The manufacturer gives a table size of 1300 mm x 570 mm and a table load of 1000 kg. Check the table and its T-slots for damage.
- Rigging and floor. The manufacturer gives a machine weight of 6500 kg. Confirm the rigging route and the floor will take that.
Doosan DNM 5700 listing history
Where it was listed
exapro.com
8 listings, 2016–2023
surplusrecord.com
6 listings, 2019–2025
usedcnc.com
2 listings, 2017–2018
cncmachines.com
1 listing, 2019
machinetools.com
1 listing
usedmachinerysales.com
1 listing, 2017
vigert.com
1 listing, 2012
Filed under CNC Vertical Machining Centers (VMC) (19).
Model years seen
2025, 2024, 2023 ×2, 2022 ×2, 2021 ×2, 2019 ×3, 2018 ×3, 2017 ×2, 2016 ×2, 2012.
What Doosan DNM 5700 listings agree on
X-axis travel
1,050 mm
Y-axis travel
570 mm
Z-axis travel
510 mm
Table size
1,300 x 570 mm
Spindle speed
8,000 RPM
Spindle power
18.5 kW (7 machines); 20 hp (2 machines)
Spindle taper
BT 40
Tool capacity
30
Machine weight
6,500 kg
What affects the value of a used Doosan DNM 5700
- Options. The units we tracked split on spindle power (18.5 kW on 7 machines, 20 hp on 2 machines).
- Build year. The units we tracked were built from 2012 to 2025, across 10 model years.
- Against the published figures. The manufacturer gives max spindle speed 8000 r/min, spindle motor power 18.5 kW, X-axis travel 1050 mm and Y-axis travel 570 mm.
Looking for a Doosan DNM 5700 for sale?
We have tracked 20 Doosan DNM 5700 listings on 7 marketplaces (exapro.com, surplusrecord.com, usedcnc.com, cncmachines.com, machinetools.com, usedmachinerysales.com and vigert.com), model years 2012 to 2025. We buy Doosan DNM 5700 machines and do not sell them.
2025 · 2024 · 2023 · 2022 · 2021 · 2019 · 2018 · 2018 · 2017 · 2016 · 2012
Every Doosan DNM 5700 we have tracked
2024 Doosan DNM 5700
Spindle power
18.5 kW
2023 Doosan DNM 5700
2 listings (exapro.com)
Spindle power
18.5 kW
2022 Doosan DNM 5700
2 listings (exapro.com, surplusrecord.com)
Spindle power
18.5 kW
2021 Doosan DNM 5700
2 listings (surplusrecord.com, exapro.com)
2019 Doosan DNM 5700
Metal Cutting · 3 listings (surplusrecord.com, cncmachines.com)
Spindle power
20 hp
2018 Doosan DNM 5700
2 listings (exapro.com, usedcnc.com)
Spindle power
20 hp
2018 Doosan DNM 5700
Spindle power
18.5 kW
2017 Doosan DNM 5700
2 listings (usedmachinerysales.com, usedcnc.com)
Spindle power
18.5 kW
2016 Doosan DNM 5700
2 listings (exapro.com)
Spindle power
18.5 kW
2012 Doosan DNM 5700
Spindle power
18.5 kW
1 more listing, no year.
The Doosan DNM 5700 among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Doosan machine we track.
Doosan DNM 5700 variants and related models
Doosan DNM-5700L
Variant
Doosan DNM 5700S
Variant
Doosan DNM 4500
Same series
Doosan DNM 6700
Same series
- X-axis travel
- 1300 mm1this model: 1050 mm2
- Table size
- 1500 mm x 670 mm1this model: 1300 mm x 570 mm2
- Doosan DNM 6700: manufacturer specification page, fetched October 23, 2026.
- Doosan DNM 5700: manufacturer specification page, fetched October 23, 2026.
Have a Doosan DNM 5700 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
