DMG MORI NZ 2000 T2Y2

What the maker published about the DMG MORI NZ 2000 T2Y2

The NZ2000 T2Y2 carries a pair of headstocks and a pair of turrets, each turret with a Y axis of its own, and Mori Seiki's German site files it under multi axis machines for volume production. Each headstock turns at up to 5,000 min-1 through a 73 mm bore, and bar as thick as 65 mm passes through, or 63 mm in the collet version. Turret 1 moves 110 mm in Y, from plus 65 mm to minus 45 mm; turret 2 has the same 110 mm reversed. In X both turrets travel 210 mm and in Z 810 mm. Headstock 2 slides 920 mm on its B axis. Turned work can measure 320 mm across, where it would meet the turret cover, and 810 mm long when both ends are cut with an outside turning tool. Each turret has 16 stations, 32 altogether, and the driven tool limit is 6,000 min-1, with 12,000 min-1 optional.

Source: Mori Seiki, an archived copy of the maker's page from 2008, October 27, 2026.

What the DMG MORI NZ 2000 T2Y2 is used for

Mori Seiki's German page presents the NZ2000 T2Y2 as a multi axis machine meant for mass production, working bar of up to 65 mm between two headstocks with two Y axis turrets.

Source: Mori Seiki, an archived copy of the maker's page from 2008, October 27, 2026.

DMG MORI NZ 2000 T2Y2 listing history

Where it was listed

Sellers also filed it under CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill) (1).

Model years seen

2011, 2010, 2008 ×3.

What DMG MORI NZ 2000 T2Y2 listings agree on

Looking for a DMG MORI NZ 2000 T2Y2 for sale?

We have tracked 5 DMG MORI NZ 2000 T2Y2 listings on 3 marketplaces (exapro.com, usedcnc.com and quickmachinerysales.com), model years 2008 to 2011. We buy DMG MORI NZ 2000 T2Y2 machines and do not sell them.

2011 · 2010 · 2008 · 2008 · 2008

Every DMG MORI NZ 2000 T2Y2 we have tracked

The DMG MORI NZ 2000 T2Y2 among lathes and turning centers

Browse all CNC Lathes, or see every DMG MORI machine we track.

Models related to the DMG MORI NZ 2000 T2Y2