CNC Lathes

DMG MORI CTX-BETA-1250-4A

3 DMG MORI CTX-BETA-1250-4A listings have come through the used market we track: 2 marketplaces, built 2017–2020.

11.8 inX-axis travel

46.1 inZ-axis travel

540 mmSwing

4 inBar capacity

What the maker published about the DMG MORI CTX-BETA-1250-4A

The CTX beta 1250 4A took DMG MORI's CTX lathes into four axis production turning: an upper and a lower turret work on the part, and an optional combined counter spindle and tailstock unit moves across the bed. Swing over the bed is 540 mm and the largest turning diameter 340 mm. The main spindle and the optional counter spindle each have a built in, water cooled motor rated 32 / 25 kW and 360 / 280 Nm, turn to 5,000 rpm and carry a C axis. Both turrets take 12 VDI 40 TRIFIX tools, index 30° in 0.4 sec and drive tools at up to 4,000 rpm. The upper slide moves 270 mm in X and 1,170 mm in Z, the lower one 195 mm and 1,200 mm, and optional Y axes on the two turrets stroke ±60 mm above and ±40 mm below. Z rapids reach 45 m/min. Standard control was SIEMENS based CELOS, shown on a 21.5 inch ERGOline display, and the machine weighs 14,500 kg.

Source: DMG MORI, an archived copy of the maker's page from 2015, October 27, 2026.

What the DMG MORI CTX-BETA-1250-4A is used for

DMG MORI shows the CTX beta 1250 4A on car parts, machine components and a spindle shaft, and pitches its paired turrets at long workpieces that both can reach without colliding.

Source: DMG MORI, an archived copy of the maker's page from 2015, October 27, 2026.