2022 Chevalier FSG-3A818
CNC Grinding Machines
CNC Grinding Machines
Chevalier FSG-3A818
9 Chevalier FSG-3A818 listings have come through the used market we track: 3 marketplaces, built 2022 where given; one early year that only one marketplace reports is left out; 5 machines once repeats are merged.
2 hpSpindle power
What the maker publishes about the current Chevalier FSG-3A818
On Chevalier Machinery's American site the FSG-3A818 appears as an automatic surface grinder and prints its table beside the larger FSG-3A1224. All three axes run automatically through surface and plunge cycles, and when a cycle ends the wheelhead lifts by itself while the table stops at the left or right end. In inch units, it grinds 18.0 inches long and 8.0 inches wide on an 8.0 by 18.0 inch table rated for 551 lbs, and the wheel centerline sits up to 17.7 inches above the table. By hand the table travels 20.9 inches, and its speed varies from 16 to 82 fpm. Crosswise, the feed runs at 37 ipm, each automatic step is 0.02 to 0.24 inch, and hand travel reaches 9.4 inches. A 2 HP motor turns the spindle at 3,450 rpm on 60 Hz or 2,850 rpm on 50 Hz, and the wheel measures 8 inches across and 0.5 inch wide. Its cartridge spindle rides on 4 angled ball bearings of class 7.
Source: Chevalier Machinery, Inc., October 27, 2026.
Chevalier FSG-3A818 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelMax. table travel - manual
20.9" (530 mm)manual
Spindle and speed
Max spindle speedSpindle speed
60Hz 3,450 rpm / 50Hz 2,850 rpm
Spindle motor powerSpindle motor
2 HP (1.5 kW)
Table, turret and tools
Table size
8.0" x18.0" (203 x 457 mm)
Max table loadMax. table load
551 lbs. (250 kg)
Further figures the manufacturer publishes
Grinding length
18.0" (457 mm)
Grinding width
8.0" (203 mm)
Distance table to centerline of wheel
17.7" (450 mm)
Feed speed
37 ipm (960 mm/min)traverse movement (Z)
Max. manual travel
9.4" (240 mm)
- manufacturer specification page, fetched October 27, 2026.
What to check on a Chevalier FSG-3A818
- Spindle. The manufacturer gives a spindle speed of 60Hz 3,450 rpm / 50Hz 2,850 rpm. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 2 HP (1.5 kW) of spindle power. Take a heavy cut and watch the load meter.
- Table. The manufacturer gives a table size of 8.0" x18.0" (203 x 457 mm) and a table load of 551 lbs. (250 kg). Check the table and its T-slots for damage.
Chevalier FSG-3A818 listing history
Where it was listed
machinetools.com
4 listings, 2022
equipt.com
3 listings, 2022
surplusrecord.com
2 listings
Sellers also listed it as FGS-3A818.
Model years seen
2022 ×2.
What Chevalier FSG-3A818 listings agree on
Spindle power
2 hp
Looking for a Chevalier FSG-3A818 for sale?
We have tracked 9 Chevalier FSG-3A818 listings on 3 marketplaces (machinetools.com, equipt.com and surplusrecord.com), model year 2022. We buy Chevalier FSG-3A818 machines and do not sell them.
Every Chevalier FSG-3A818 we have tracked
2022 Chevalier FSG-3A818
CNC Grinding Machines
7 more listings gave no year or the early year left out above.
The Chevalier FSG-3A818 among grinders
Browse all CNC Grinding Machines, or see every Chevalier machine we track.
Chevalier FSG-3A818 variants and related models
Chevalier FSG-3A1224
Variant
- Spindle motor power
- 3.7 kW1this model: 2 HP (1.5 kW)2
- Table size
- 305 x 610 mm1this model: 8.0" x18.0" (203 x 457 mm)2
Chevalier FSG-618M
Same series
- Chevalier FSG-3A1224: manufacturer specification page, fetched October 27, 2026.
- Chevalier FSG-3A818: manufacturer specification page, fetched October 27, 2026.
- Chevalier FSG-2A618: manufacturer specification page, fetched October 27, 2026.
Have a Chevalier FSG-3A818 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
