Chevalier FSG-2A618

What the maker publishes about the current Chevalier FSG-2A618

Chevalier Machinery lists the FSG-2A618 as a semi-automatic surface grinder. It grinds parts up to 457 mm long and 152 mm wide on a 150 x 460 mm table that carries 210 kg, with 450 mm between the table and the wheel centerline. The table travels as far as 510 mm by hand, and its variable speed runs from 5 to 25 m/min. Crosswise, the automatic traverse steps from 0.4 to 6 mm, the feed runs at 960 mm/min, and manual travel reaches 180 mm. A 1.5 kW motor turns the spindle at 3,450 rpm on 60 Hz power or 2,850 rpm on 50 Hz, driving a 205 x 12.7 mm wheel on a 31.75 mm bore. The cartridge spindle sits on four class 7 ball bearings set at an angle, and a separate hydraulic unit keeps vibration and heat away from the machine. The saddle slides on double V ways that are scraped by hand and coated with Turcite-B, the castings are annealed Meehanite iron, and the grinder weighs 790 kg.

Source: Chevalier Machinery, Inc., October 27, 2026.

What the Chevalier FSG-2A618 is used for

Chevalier's American site lists the FSG-2A618 as its semi-automatic surface grinder, in one group with the automatic FSG-3A818/3A1224 and the fully automatic FSG-1224/16ADIV, and says its four-bearing cartridge spindle can take heavy grinding.

Source: Chevalier Machinery, Inc., October 27, 2026.

Chevalier FSG-2A618 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What to check on a Chevalier FSG-2A618

• Spindle. The manufacturer gives a spindle speed of 60 Hz 3,450 rpm / 50 Hz 2,850 rpm. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 1.5 kW of spindle power. Take a heavy cut and watch the load meter.
• Table. The manufacturer gives a table size of 150 x 460 mm and a table load of 210 kg. Check the table and its T-slots for damage.
• Rigging and floor. The manufacturer gives a machine weight of 790 kg. Confirm the rigging route and the floor will take that.

Chevalier FSG-2A618 listing history

Where it was listed

Model years seen

1995 ×2.

What Chevalier FSG-2A618 listings agree on

Looking for a Chevalier FSG-2A618 for sale?

We have tracked 5 Chevalier FSG-2A618 listings on 4 marketplaces (equipt.com, generationmachinetools.com, machinetools.com and surplusrecord.com), model year 1995. We buy Chevalier FSG-2A618 machines and do not sell them.

1995 · 1995

Every Chevalier FSG-2A618 we have tracked

3 more listings gave no year or the early year left out above.

The Chevalier FSG-2A618 among grinders

Browse all CNC Grinding Machines, or see every Chevalier machine we track.

Models related to the Chevalier FSG-2A618

1. Chevalier FSG-3A1224: manufacturer specification page, fetched October 27, 2026.
2. Chevalier FSG-2A618: manufacturer specification page, fetched October 27, 2026.