Used Toshiba and Shibaura Machines We Buy
Machine Tool Exchange buys used Toshiba and Shibaura machines straight from the shops that own them, with no broker and no auction house in between. Under this name the used market runs mostly to BTD, BP and BF boring mills, BMC and MPF machining centers, TUE vertical lathes, and injection molding machines. Here is what actually moves an offer.
- 24–48hQuote turnaround
- Since 2012Buying machines
- DirectNot a broker

How Selling Your Toshiba or Shibaura Machine Works
Read us the full designation
Toshiba and Shibaura plates carry suffixes that change the machine, like the R16 or R22 on a BTD boring mill, so send the whole string with the year, the control (TOSNUC, Fanuc or Siemens) and the condition. Spindle hours help if you track them.
Your quote in 24 to 48 hours
We check the series, the table or swing size and the control against current demand, and a quote usually comes back within 24 to 48 hours, straight from the buyer rather than a broker.
Moving a boring mill or a molding press
Accept the number and we can arrange the rigging, crating, freight and pickup, whether the machine is a floor-type boring mill or an injection molding machine. We have been buying used equipment since 2012.
- CNC LathesToshiba 800R (2019)
- CNC Boring MillsToshiba BT-8CR
- CNC Boring MillsToshiba BTD-11 (1982)
- CNC Boring MillsToshiba BTD-9
- CNC Boring MillsToshiba BTD110R16 (1997)
- CNC LathesToshiba 220G
- CNC LathesToshiba 6 (2008)
- CNC Gear MachineryToshiba B AXIS TABLE GEAR
- CNC Boring MillsToshiba BF 130B (1997)
- CNC Vertical Machining Centers (VMC)Toshiba BMC-630 (1995)
- CNC Boring MillsToshiba BP-110 (1996)
- CNC Boring MillsToshiba BTD-11ER16
- CNC LathesToshiba DC-350J-MT
- CNC Vertical Turret Lathes (VTL)Toshiba TXN-13 (1989)
- CNC Vertical Machining Centers (VMC)Toshiba VFSX-2004BY-C1 (2004)
- CNC Boring MillsToshiba BF13AQ
- CNC Boring MillsToshiba BP130 P40 (1997)
- CNC Boring MillsToshiba BP150R22 (2007)
- CNC Boring MillsToshiba BSF-150A
- CNC Boring MillsToshiba BT-10B-RS
- CNC Boring MillsToshiba BT-8DR
Who Builds Toshiba and Shibaura Machines
Both nameplates come from one Japanese company, today Shibaura Machine Co., Ltd., with headquarters in Tokyo and Numazu. It was founded in December 1938 as the Shibaura Machine Tool Co., with Kametaro Fujishima as a key figure, and set up again as Shibaura Machine Works Co. in March 1949. In June 1961 it became Toshiba Machine Co., Ltd., and in April 2020 it went back to a Shibaura name as Shibaura Machine Co., Ltd.
As a rough guide, then, a Toshiba Machine plate points to a machine built between the 1961 and 2020 name changes, and a Shibaura Machine plate to one built after April 2020 or, on a very old machine, before 1961.
Shibaura Machine's Name Changes and Plants
Entries from the History page on Shibaura Machine's corporate site, which runs to 2024, picked for what they say about a used machine's nameplate and origin:
| When | What Shibaura Machine records |
|---|---|
| 1938 (December) | Shibaura Machine Tool Co. established |
| 1949 (March) | Shibaura Machine Works Co. established |
| 1961 (June) | Name changed to Toshiba Machine Co., Ltd. |
| 1964 (September) | Sagami Plant established |
| 1974 (April) | Toshiba Machine Co. America established |
| 1987 (October) | Gotemba Plant established |
| 2002 (October) | Machine tool division made a separate company, Toshiba Machine Machinery Co., Ltd. |
| 2010 (October) | That subsidiary merged back into the parent |
| 2020 (April) | Name changed from Toshiba Machine Co., Ltd. to Shibaura Machine Co., Ltd. |
Plants, the US Company and the Other Product Lines
In Japan, Shibaura Machine builds at its Numazu plant, at Sagami, established in 1964, and at Gotemba, established in 1987, and among its overseas sites it lists plants in Shanghai and Chennai. Its US company goes back to April 1974, when Toshiba Machine Co. America was established.
Machine tools are one line among several. The company's principal products also include injection molding, die casting and extrusion machines and industrial robots, which is why the same plate turns up on plastics and casting equipment as well as on boring mills and vertical lathes.
Reading the Series Letters on a Shibaura or Toshiba Machine Tool
Shibaura Machine's current machine tool line-up by series, grouped the way the maker groups it. Some designations seen on used machines, such as BP, are not in this current list:
| Series | What it is |
|---|---|
| BTD | Table-type horizontal boring and milling machine with a traversing table; the maker's best-selling series, now offered as the BTD-S |
| BTH | Table-type horizontal boring and milling machine with a traversing column |
| BMC | Horizontal machining center with automatic pallet change as standard |
| BM-Q | Horizontal machining center with a quill-type spindle |
| BF | Floor-type horizontal boring and milling machine, quill-type spindle feed |
| BSF | Floor-type horizontal boring and milling machine, ram-type spindle feed |
| TUE, TSS-C, TUD, TMD, TDS | Vertical lathes and turning centers; an (S) after the name marks the version that can also mill |
| MPC-B, MPC-EⅡ, MPC-H, MPJ | Planomiller-type double-column machining centers with a table that moves along the X-axis |
| MPF-FS | A space-saving double-column machine of the vertical machining center type; five-sided machining with an optional attachment |
| MCW | Double-column machining center with the cross rail traversing on the X-axis |
| MP-(U) | Double-column multi-tasking machine that adds turning, with 5-axis machining |
TOSNUC Controls and Parts Support
Shibaura calls TOSNUC its own NC system, used on its machines for many years, and support for the older series is winding down. In October 2022 it said that the servo motors for the TOSNUC-800 and TOSNUC-777.2 controllers were out of production and the encoder maker was stopping too, so it would end service support for the related parts by the end of December 2025. In January 2024 it added that the IC chips on the core circuit boards of the TOSNUC-600, 777, 777.2, 800 and 888 series had been discontinued.
That shapes the offer on a used Toshiba. A machine still running one of those controls is valued with the parts outlook in mind, while one that has had an NC replacement under Shibaura's retrofit program, which also covers overhauls, repairs and precision adjustment, is a different proposition. Tell us which control is on the screen and whether it has been retrofitted.
Wear Points and Options to Note on a Used Toshiba Boring Mill
Shibaura's own service menu doubles as a checklist of what wears on its boring mills. It regrinds spindle taper holes, which it says deteriorate through long-term use and accidental crashes. It inspects the balance chain that carries a heavy spindle head, because that chain has a lifespan. It updates spindle drive systems and old oil coolers, which it names as a possible source of errors, and it fits a battery box so a missed NC battery change does not cost a recovery.
Configuration separates two machines with the same family name. On Shibaura's horizontal line-up a BTD moves its table and a BTH moves its column, a BF feeds its spindle by quill and a BSF by ram, and a BMC comes with automatic pallet change as standard. The maker lists angle heads, a rotary face plate and an added B-axis as options, so tell us which are on your machine. A taper regrind record, a balance chain or drive replacement, and the options fitted are what let us price a used Toshiba boring mill on the machine rather than on its age.
Shibaura Service, or Selling Outright
In April 2024 Shibaura Machine handed its main machine tool after-sales service business to a group company, Shibaura Machine Engineering Co., Ltd. The service side supplies parts and tooling, regrinds worn spindle taper holes, updates spindle drive systems and oil coolers, and gives guidance on NC programming and operation.
That is the route for a boring mill you plan to keep in production. If it is leaving, we buy it as it stands, and a record of a taper regrind or a drive update is worth passing along with the details.
The Toshiba Machine Types We Buy
Used machines under the Toshiba and Shibaura names lean toward heavy iron. Boring comes first: CNC table-type and floor-type horizontal boring mills, machines filed simply as HBMs, and vertical boring mills. Machining and milling come next, led by horizontal machining centers, gantry and portal mills and vertical machining centers, and turning adds CNC lathes and vertical turret lathes. Plastics and casting equipment is a real part of the mix as well, alongside spindle drives and motors, automation and pallet systems, grinders and robots. Plenty of used Toshibas are also described only as general metal cutting equipment, so on a Toshiba the string stamped on the nameplate tells us more than any category label.
BTD, BP and BF: The Toshiba Boring Mill Lines
Three boring lines carry most of the weight here. BTD, Shibaura's table-type horizontal boring and milling line, is the family most common on the used market, and BTD-110R16 is the model string you will run into most often. Inside the BTD line you will also see BTD-200QF, BTD-110, BTD-11B, BTD-110H, BTD 13F R22, BTD 200QH, BTD-130H.R22 and BTD-200QE. BP comes next, with BP-150, BP-150.R22, BP-13B-P7, BP-130-R22, BP-110 and BP-13 all turning up. BF, the floor-type line, includes the BF-130A, BF 130B and BF-130B. Alongside those three you will also see BT, BTH, BFT and BSF designations. If the plate on your machine reads something outside the three named lines, send it anyway. Boring mills are the used Toshibas that change hands most, and they are the equipment we chase hardest.
BMC, MPF and MPC Machining Centers, TUE Vertical Lathes
On the milling side, BMC is the horizontal machining center line, with BMC-800, BMC-100E, BMC63 and BMC-1000 among the strings stamped on its plates. MPF, a double-column line where five-sided machining comes with an optional attachment, includes the MPF-2140, and MPC is Shibaura's planomiller-type double-column line. MPH double column machining centers turn up less often, so do not be surprised if we ask for more detail on one. Turning is anchored by TUE vertical turning lathes, where TUE-15, TUE 150 and TUE 20 are the most common strings, plus TSS in the same vertical lathe group. TEM, TMD, TXN, TX, MPE, TUD, KRT and KWA also appear as designations. On both the milling and the turning side, the table size, the travels and the control decide more than the family name does.
Toshiba Machine, Shibaura Machine, and the Name on the Plate
Toshiba Machine Co. changed its name to Shibaura Machine Co., Ltd. in April 2020, going back to the Shibaura name it was founded under in 1938. The machines and the product lines did not change, and we buy from both eras, so a nameplate reading Shibaura Machine and one reading Toshiba Machine get the same treatment here. Both names turn up on used machines, and the paperwork shows how loosely these designations get written down. BTD-110R16, BTD110R16 and plain 110R16 are three spellings of one designation. So are TUE-15, TUE 15 and TUE15. BF-130B and BF 130B appear both ways, as do BTD-110 and BTD110, BTH-110 and BTH110, BMC-800 and BMC800. Suffixes add more variation still: BTD-130H.R22, BP-150.R22, BP-130-R22 and BTD 13F R22. That variance is a spelling problem rather than a supply problem, and it is why we ask for the plate string character for character instead of a cleaned up version of what is stamped there.
Injection Molding, Die Casting and Extrusion Under the Toshiba Plate
Toshiba is not only a metal cutting nameplate, and the plastics side is the part most brand pages skip entirely. Injection molding machines are the biggest group on that side, some filed as CNC injection molding machines and some without the CNC label, followed by die casting machines and a few CNC extruders. Model strings on the plastics side include EC-prefixed molders such as the EC240NIIV30, EC240V21, EC65V21, EC55SXV50, EC85SXV50 and EC230SXII, and DC-prefixed die casters including the DC350J, DC800J, DC250J, DC500J, DC350R, DC650J, DC800R and DC500R. We buy molding and die casting machines the same way we buy boring mills, one machine at a time. Send the model, the year, the control, the clamp tonnage if the plate carries it, and the condition, and we take it from there.
Selling a Large Toshiba: Rigging, Freight and Payment
Start with the model, year, condition, spindle hours, tooling and control type, whether that is Tosnuc, Fanuc or Siemens. Photos help and are not required, though on a Toshiba they earn their keep: with so many boring mills and gantry mills under this name, the footprint and the way the machine sits in the building drive the rigging plan. Jason Puuri scopes it himself against current demand, model, condition and age, and an offer typically comes back within 24 to 48 hours. Accept it and we can arrange rigging, crating and freight, in all 50 states, and arrange the pickup. MTE is an affiliate of Superior Machine and Tool, buying and selling used CNC equipment since 2012. We are the buyer, not a broker or a listing service. We take machines running, idle or needing work, and if Mazak, Okuma or DMG Mori equipment is leaving through the same door, we buy that too.
Sources for the Toshiba and Shibaura facts on this page
- History, Shibaura Machine Co., Ltd. (formerly Toshiba Machine Co., Ltd.)
- The origin of manufacturing, Story 1, Shibaura Machine Co., Ltd.
- Corporate Data, Shibaura Machine Co., Ltd.
- Offices and Manufacturing Sites, Shibaura Machine Co., Ltd.
- Machine Tools, Shibaura Machine Co., Ltd.
- Horizontal Machine line-up, Shibaura Machine Co., Ltd.
- Turning Center line-up, Shibaura Machine Co., Ltd.
- Double Column Type Machining Center line-up, Shibaura Machine Co., Ltd.
- Service Business and service notices, Shibaura Machine Co., Ltd.
- Retrofitting Concept and Program, Shibaura Machine Co., Ltd.
Ready to sell your machine? Tell us what you have and get a competitive offer in 24-48 hours. We can arrange the removal, rigging and logistics, and the truck to move it.
Machine Tool ExchangeNationwide CNC machine buyer since 2012
- 24-48h quote
- Coast-to-coast
Customer Reviews



Superior Machine & Tool completed the removal of all our equipment precisely according to our timeline and specifications. Their professionalism and reliability made them a pleasure to work with, and we highly recommend their services.
Closing down our facility was stressful, but these folks made selling our surplus equipment fast and easy. Their team handled payment right away and coordinated removal like pros.
We had a deadline for our asset removal, and they removed everything safely and finished ahead of schedule. The whole process was seamless and stress-free.
These guys made the whole process so easy. I got paid fast, and they picked up the equipment right on time.
Common questions
How much is a used Toshiba CNC machine worth?
It depends on the model, the year, the spindle hours, the table and travel sizes, the control and the overall condition. Send those and we scope your specific machine rather than quoting a line off a chart.
How do I sell a used Toshiba machine?
Three steps. Send the model, year, condition, spindle hours, tooling and control type. We evaluate it and get an offer back to you, typically within 24 to 48 hours. Accept it and we schedule the pickup.
What is the difference between Toshiba Machine and Shibaura Machine?
Shibaura Machine is the current name. Toshiba Machine Co. changed its name in April 2020 and the machines and product lines stayed the same. We buy from both eras, and the wording on the nameplate does not change the offer.
Who buys used Toshiba boring mills?
Machine Tool Exchange buys them directly. We are not a listing service, an auction platform, or a broker hunting for a third party afterward, and we buy BTD, BP and BF machines nationwide.
Do you buy Toshiba machines with Tosnuc, Fanuc or Siemens controls?
Yes, all three. Tell us which control the machine runs and its generation along with the model and hours, since that affects how quickly the next shop can put the machine back to work.
Do you buy Toshiba injection molding machines?
Yes, we buy them, along with die casting machines and extruders under the same plate.
Can you arrange rigging, crating and freight on a large Toshiba?
Yes. We can arrange rigging, crating and freight for a large Toshiba in all 50 states, and we can arrange the pickup.
When did Toshiba Machine become Shibaura Machine?
In April 2020, when Toshiba Machine Co., Ltd. changed its name to Shibaura Machine Co., Ltd. It was a return more than a new brand: the company was founded in December 1938 as the Shibaura Machine Tool Co. and had carried the Toshiba Machine name since June 1961. A plate with either name comes from the same maker, and we buy both.
Who distributes Toshiba Machine in the US?
The maker set up its own US company early: Shibaura Machine's history records the establishment of Toshiba Machine Co. America in April 1974. On the service side, the parent company moved its main machine tool after-sales business to Shibaura Machine Engineering Co., Ltd. in April 2024. If you are selling a Toshiba rather than servicing it, we buy it direct.
What is a Toshiba BTD boring mill?
BTD is Shibaura Machine's table-type horizontal boring and milling series, the version in which the table traverses; its BTH series moves the column instead. The maker calls BTD its best-selling machine tool series and offers it today as the BTD-S. Send us the full string off the plate, suffix and all, because the suffix is what separates one BTD from another.
What control does a Toshiba CNC machine use?
Toshiba Machine built its own NC system, TOSNUC, and Shibaura's service notices name the TOSNUC-600, 777, 777.2, 800 and 888 series. In January 2024 Shibaura said the IC chips on those controls' core circuit boards had been discontinued, ending its support for the related parts. Tell us whether your machine still runs TOSNUC or has had its NC replaced.
What does Shibaura make?
Shibaura Machine, the company called Toshiba Machine until April 2020, lists its principal products as injection molding machines, die casting machines, extrusion machines, machine tools and high precision machine tools, along with micro pattern imprinting machines, glass mold press machines, industrial robots, electronic control systems and castings, plus retrofitting and service. That spread is why one plate can sit on a horizontal boring mill, a molding press or a die caster, and we make offers on all three.
Who is the manufacturer of Toshiba products?
For Toshiba-badged machine tools, injection molding machines and die casting machines, the maker is Shibaura Machine Co., Ltd. It carried the Toshiba Machine Co., Ltd. name from June 1961 until April 2020, when it changed back to a Shibaura name. Toshiba copiers, medical scanners and household appliances are not what this page covers, and we do not buy them. If the plate reads Toshiba Machine or Shibaura Machine, it is the industrial maker, and the machine belongs here.
Thinking about selling Toshiba and Shibaura Machines?
The fastest Toshiba quote starts with the data plate read exactly as it is stamped, suffix and all, because BP-150.R22 and BTD 13F R22 are not the same conversation as a bare BP-150. Send that string, the control, the spindle hours and one photo showing how the machine sits on the floor, and Jason Puuri scopes it himself before we build a rigging plan.
- Fast Response
- Fair Offers
- Hassle-Free Process










