Direct procurement2022 Model

Sell your Okuma MULTUS-B250II-1SW/750 today.

MTE does not act as a broker, nor do we buy on consignment. We buy machinery and assets outright and arrange the pickup.

Make: Okuma
Model: MULTUS-B250II-1SW/750
Year: 2022
Category: CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill)
Condition: Used / Surplus

Jason PuuriOwner, Superior Machine & Tool, Inc.Message From MTE Owner

Jason sets final pricing on the machines MTE buys.

Okuma MULTUS-B250II-1SW/750 Specifications

Chuck Size: 8"
Max Diameter Bar Capacity: 2.6"
Spindle Motor: 30 / 20 HP
Spindle Speed: 5000 RPM
Spindle Nose: A2-6
Spindle Bore: 3.15"
Tools: 60
Sub Spindle Chuck Size: 6"
Sub Spindle Motor: 15 / 10 HP
Sub Spindle Nose: 140 mm Flat
Sub Spindle Speed: 6000 RPM
Rapid Traverse Rates (X & Z / Y / W): 1575 / 1023 / 787 ipm
X-Axis Travel: 19.69"
Z-Axis Travel: 31.5"
Y-Axis: 7.87"
C-Axis Index (Left & Right Spindles): 0.001 Degrees
Distance Between Spindles: 40.55"
H1 Index: 0.001 Degrees
H1 Spindle Speed: 50 - 12000 RPM
H1 Swivel: 225 Degrees
Max Tool Diameter: 3.54" / 5.12"
Max Tool Length: 7.87"
Max Tool Weight: 8.8 lbs.
Max Turning Diameter: 23.62"
W-Axis Travel (Sub Spindle): 31.89"
Chip Conveyor: Right Discharge Drum Filter High 750
Lubrication Monitor: B-2
Armroid A201 Robot 3-Jaw Spec: Yes
Kitagawa 8 BB208 Hydraulic Chuck Left: Yes
Kitagawa 6 B206 Hydraulic Chuck Right: Yes
Renishaw RMP600 RMI-Q Capto C6: Yes
Renishaw Inspection Plus Software with GUI - Lathe: Yes
Auto Gauging: Yes
Three Color Tower Light: Yes
Lathe Tool Index: Yes
Lathe Tool THD Clamp: Yes
Tool Clamp Output Hold: Yes
HI-G Control: Yes
PFC II: Yes
Home Position B: Yes
Plane Conversion: Yes
Profile Generation: Yes
Synchronized Tapping: Yes
Helical Cutting: Yes
Slant Cutting: Yes
Spindle Fluctuate: Yes
GM Code Macro: Yes
Center Compensation: Yes
Tool Center Control: Yes
Super-NURBS Hi: Yes
Super Hi-NC: Yes
Super-NURBS Rac: Yes
Inverse Time Feed: Yes
G00 Linear Feed: Yes
B-Axis Interpolation: Yes
Turret Position Clamp: Yes
0.0001M Control: Yes
Lap 4: Yes
Nose Radius 2B: Yes
Expanded Auto Chamfer: Yes
Arc Thread Cutting: Yes
C Zero Offset: Yes
Y Gauging: Yes
Optical Sensor: Yes
Pitch Error Compensation: Yes
Tool Life Management: Yes
Tool Wear Compensation: Yes
Tool Offset System: Yes
Inch / Metric Switchable: Yes
Cycle Time Calculation: Yes
NC Work Counter: Yes
Cycel Time R New: Yes
NC Work Monitor: Yes
Cycle Time Check: Yes
Load Monitor: Yes
Mac Man: Yes
DNC T-1: Yes
DNC DT: Yes
Thermal Compensation L2: Yes
Spindle Orientation: Yes
M-Axis Orient: Yes
Spindle Max IL: Yes
Coordinate Conversion: Yes
Coordinate Calculate: Yes
Program Message: Yes
Custom-API: Yes
Use Tool Display: Yes
Machining Mode: Yes
Nose-R Direction Change: Yes
Base Operating System: Yes
Tool Mac Information: Yes
Offset Base Fix: Yes
Axis Active Stop: Yes
Variable Lost Motion: Yes
Servo Navi L: Yes
CE Marking Stop: Yes
Collision Avoidance System: Yes
Program Help: Yes
Help: Yes
3D Animation: Yes
Animation: Yes
Y-Mode Touch Setter: Yes
3D Coordinate Conversion: Yes
Hi-Speed Restart: Yes
Sup VL Dip Reg: Yes
Robot Dandori Display: Yes
Cycle Mode Set: Yes
Short Rapid Droop: Yes
EES Motor: Yes
Con Back Spindle: Yes
Super Easy Set: Yes
Tool Direction: Yes
Tool Direction Compensation: Yes
TCPC Machine Co: Yes
TCPC Sub Spindle: Yes
Super Prof Gene: Yes
Rapid Feed Speed Set: Yes
Work Weight Set: Yes
C-Axis Manual Coordinate: Yes
SDF Separate NC: Yes
SDF Separate SP: Yes
MFU: Yes
Rotary Notch Fil: Yes
Gather Aging: Yes
Machine Diagnostics: Yes
Eco Suite: Yes
Eco Suite Plus: Yes
OSP Suite: Yes
Thermal Compensation OilCon: Yes
Mac Time Short: Yes
Spindle Out Monitor: Yes
Suite Without Widget: Yes
Remaining Time Display: Yes
Chuck IL RLS: Yes
2 Chuck PDL 1SP: Yes
2 Chuck PDL 2SP: Yes
Oil Cooler Alarm A: Yes
Ex Brake Release: Yes
Spindle Orientation Electric: Yes
First Spindle Oil Cooler: Yes
Second Spindle Oil Cooler: Yes
M-Axis Orientation: Yes
B-Axis Position LOMP: Yes
ATC Type H: Yes
Mechanical Lock Door 1: Yes
Override Special: Yes
Air Pressure Detection: Yes
Program Stop Special: Yes
Oil Level Detection: Yes
Thru Airblow IL: Yes
B-Panel: Yes
OSP Chip Convere: Yes
High Pressure Coolant Unit 3: Yes
C-Axis Brake Torque Limiter: Yes
Coolant L/M Change: Yes
Touch Setter: Yes
Touch Setter Motor: Yes
Touch Sensor: Yes
Door IL S: Yes
Auto Door: Yes
DnC-B: Yes
Chip Conveyor Check: Yes
Portable PH: Yes
B-Axis Turret: Yes
Turret Type H1: Yes
TR Pendulum Control: Yes
Slant-Y Axis: Yes
MG Door Mechanical Lock: Yes
NC Turret with Brake: Yes
New CEMK: Yes
Thermal Oil Cooler: Yes
EE Manual Change: Yes
Armroid Client: Yes
EES Type-B: Yes
Armroid CO Hand: Yes
First Spindle C Gain Cut: Yes
Second Spindle C Gain Cut: Yes
PH Type B: Yes
Spindle Diagnostics: Yes

Do you have a Okuma MULTUS-B250II-1SW/750 to sell?

We are actively seeking a 2022 Okuma MULTUS-B250II-1SW/750 CNC multi-tasking machine. This advanced model is designed to provide exceptional versatility and efficiency for various manufacturing needs. With a robust 30 HP spindle motor and a maximum spindle speed of 12,000 RPM, it is well-equipped to handle a wide range of machining tasks. The machine features an 8-inch chuck size and can accommodate a maximum bar capacity of 2.6 inches, making it ideal for both small and large production runs. The Okuma MULTUS-B250II-1SW/750 is not just about power; it also offers impressive precision with rapid traverse rates of 1,575 inches per minute in the X and Z axes, ensuring that you can complete your machining processes swiftly.

The travel capabilities are noteworthy, featuring 19.69 inches in the X-axis, 31.5 inches in the Z-axis, and 7.87 inches in the Y-axis. This level of travel allows for complex machining operations that can enhance your production capabilities. Additionally, the machine includes a sub-spindle with a 6-inch chuck size and a motor capable of 15 HP, which further increases its operational flexibility. The sub-spindle speed of 6,000 RPM complements the main spindle, enabling simultaneous operations that can significantly reduce cycle times. Sellers often part with machines like this for a variety of reasons.

Whether upgrading to newer technology, downsizing operations, or closing a facility, we understand that each seller has unique circumstances. We are here to support you through this transition, offering competitive prices for your equipment. At Superior Machine Tools, we buy CNC machines nationwide and ensure a seamless selling experience. If you own a 2022 Okuma MULTUS-B250II-1SW/750 or similar equipment, we invite you to reach out to us today. Let us help you unlock the value of your machine while providing you with the support you need during this process.