Sell your Mazak QUICK-TURN-NEXUS-200MY 2004 today.
Mazak QUICK-TURN-NEXUS-200MY Specifications
| Chuck Size | 8" |
|---|---|
| W Axis | Not Available |
| Max Bar Capacity | 2" |
| Spindle Horsepower (Cont./30 Min.) | 35 HP |
| X1-Axis Travel | Not Available |
| Spindle Power | Not Available |
| Capacity | Not Available |
| Swing Over Carriage | Not Available |
| X-Axis (Cross Travel) | Not Available |
| Z-Axis (Longitudinal Travel) | Not Available |
| Y-Axis | Not Available |
| Tailstock Quill Taper | Not Available |
| Minimum Spindle Indexing Increment | Not Available |
| Tailstock Quill Travel | Not Available |
| Second Spindle Horsepower | Not Available |
| Swing Over Bed | 26.5" |
| Spindle Speeds 1, 2 | 5000 RPM |
| Rapid Traverse Y Axis | Not Available |
| Design | Not Available |
| Spindle Nose | Not Available |
| Main | Not Available |
| Rapid Traverse X-Axis | Not Available |
| Tailstock Body Travel | Not Available |
| C - Axis Travel 1, 2 | Not Available |
| Spindle Speed (Mill) | Not Available |
| Approximate Machine Height | Not Available |
| Standard Cutting Diameter | Not Available |
| Main Drive Motor | Not Available |
| Sub Spindle Motor | Not Available |
| X-Axis Rapid Traverse Rate | Not Available |
| Tooling | Not Available |
| Turret Positions | 12 |
| W Axis Travel (Sub Spindle) | Not Available |
| Distance Between Spindle Faces (Max.) | Not Available |
| Machining Length | Not Available |
| Chuck Type | Not Available |
| Maximum Tool Weight | Not Available |
| Maximum Machining Diameter | Not Available |
| Max. Cutting Diameter | Not Available |
| Spindle Bore Diameter | Not Available |
| Turret Indexing Time | Not Available |
| Included Tooling | Not Available |
| Sub | Not Available |
| Rapid Traverse Z Axis | Not Available |
| Electrial | Not Available |
| Spindle Indexing (C-Axis) | Not Available |
| Rapid Traverse Rates | Not Available |
| Center Distance | Not Available |
| Additional Equipment | Not Available |
| Main Spindle Bore Diameter | Not Available |
| Machining Spindle Horsepower | Not Available |
| Max Work Transfer Diameter | Not Available |
| X - Axis Travel | Not Available |
| Y-Axis Travel | Not Available |
| Spindle Motor Power | Not Available |
| Control System | Not Available |
| Maximum Tool Diameter | Not Available |
| Spindle HP | Not Available |
| Rapid Traverse | Not Available |
| Tailstock Control | Not Available |
| Bed Length | Not Available |
| Spindle Speed | Not Available |
| Main Spindle Power | Not Available |
| Max Bar Capacity Sub Spindle | Not Available |
| Tool Presetters | Not Available |
| Maximum Cutting Length Chuckwork | Not Available |
| Mfr | Mazak |
| Max Swing Over Bed | 26.5" |
| B-Axis Travel | Not Available |
| Chuck Size 1, 2 | Not Available |
| Main Circuit | Not Available |
| High Pressure Coolant System | Not Available |
| Rotary Tool Motor | Not Available |
| Rapid Traverse Rates X-Axis | Not Available |
| Hydraulic Chuck (Sub) | Not Available |
| Maximum Drill | Not Available |
| Automatic Tool Eye | Not Available |
| Tool | Not Available |
| Spindle Liners | Not Available |
| Tailstock | Not Available |
| Spindle Drive | Not Available |
| Max. Spindle Speed | Not Available |
| Live Tool Holders | Not Available |
| Type Of Turret | Not Available |
| Tool Size | Not Available |
| Approximate Machine Dimensions | Not Available |
| Rapid Traverse Rate X | Not Available |
| Milling Drill Size | Not Available |
| Sub-Spindle | Not Available |
| Z1-Axis | Not Available |
| X - Axis Travel 1, 2 | Not Available |
| Tool Size Milling | Not Available |
| Distance Between Centers | Not Available |
| Spindle Speed Range | Not Available |
| Od Turning Tool Size | Not Available |
| No. Positions On Turret | Not Available |
| Max. Swing | Not Available |
| Tool Size (Boring Bar Max. Dia.) | Not Available |
| Max Turning Length | Not Available |
| Tailstock Quill Dia. | Not Available |
| Spindle Speeds Range | Not Available |
| Gantry | Not Available |
| Rapid Traverse X | Not Available |
| High Power Coolant | Not Available |
| Approximate Machine Weight | Not Available |
| Rotary Tools Speed Range (Live Tools) | Not Available |
| Load Stations | Not Available |
| Z1-Axis Travel | Not Available |
| Z-Axis (L) | Not Available |
| Total Number Of Tools | Not Available |
| Rapid Traverse B Axis | Not Available |
| Main Spindle Horsepower | Not Available |
| Tapping | Not Available |
| Chuck Diameter (L&R) | Not Available |
| Z2 Axis Lower | Not Available |
| Second Spindle Maximum RPM | Not Available |
| Main & Second Spindle Motor | Not Available |
| Rapid Traverse Z-Axis | Not Available |
| Turret Rotary Tool Horse Power 1 | Not Available |
| Collet Chuck | Not Available |
| Turret Index Time | Not Available |
| Rapid Traverse C - Axis | Not Available |
| Operating System | Not Available |
| Rapid Traverse Z - Axis | Not Available |
| Main Spindle Bore | Not Available |
| Maximum Tool Length | Not Available |
| Shaft Size | Not Available |
| Weight | Not Available |
| Sub Spindle Rapid Traverse Rate | Not Available |
| Rapid Traverse (Y-Axis) | Not Available |
| Main Spindle Max. Bar Work | Not Available |
| Rotary Tool Spindle Horsepower/(10 Min) | Not Available |
| Tool Storage Capacity | Not Available |
| Bar Work Capacity | Not Available |
| Horsepower Head 1 | Not Available |
| Head 2 | Not Available |
| X-Axis Travel/Rapid Reverse | Not Available |
| Rapid Traverse Rate - X1 | Not Available |
| Max Turning Diameter | Not Available |
| Chuck Size (2Nd Spindle) | Not Available |
| Max Machining Length (Chuck Work) | Not Available |
| Z-Axis Stroke | Not Available |
| Maximum Bar Work | Not Available |
| Number Of Turret Positions | Not Available |
| Z-Axis Travel/Rapid Reverse | Not Available |
| Turret Number Of Tools | Not Available |
| Second Spindle Maximum Bar Work | Not Available |
| Turning Speed | Not Available |
| Signal Tower Lights | Not Available |
| Diameter | Not Available |
| Spindle Bore Main | Not Available |
| X2-Axis (Lower) | Not Available |
| Motor Output (5/10 Min. Rating) | Not Available |
| Type | Not Available |
| Swing | Not Available |
| Bar | Not Available |
| Live Tooling | Not Available |
| Spindle Torque (25% Ed) | Not Available |
| Turret Stations | Not Available |
| Turret Travels (X,Z) | Not Available |
| Live Tool Power | Not Available |
| Number Of Spindles | Not Available |
| Z1 Axis Travel | Not Available |
| X1-Axis | Not Available |
| Second Spindle Bore | Not Available |
| B Axis Travel | Not Available |
| Turret Rotary Tool Spindle Speed 1 | Not Available |
| Chuck Size (Main) | Not Available |
| Tailstock Travel | Not Available |
| Rapid Traverse (C-Axis) | Not Available |
| Turret Configuration | Not Available |
| Max Machining Length (Shaft Work) | Not Available |
| Y1-Axis | Not Available |
| Sub Spindle Bore | Not Available |
| With Adjacent Pocket Empty | Not Available |
| Turning Diameter | Not Available |
| Shaft Diameter | Not Available |
| Max Weight Capacity | Not Available |
| Main Spindle Indexing | Not Available |
| Distance Between Spindle Faces | Not Available |
| Turret Type | Not Available |
| Maximum Turning Length | Not Available |
| C - Axis | Not Available |
| Z-Axis (R) | Not Available |
| Number Of Axes | Not Available |
| Load / Unload Tray | Not Available |
| Maximum Cutting Length For Chuckwork | Not Available |
| Distance Between Center | Not Available |
| Barfeed | Not Available |
| Travel | Not Available |
| Rapid Traverse Rates Z1 | Not Available |
| Z2 | Not Available |
| Maximum Swing Over Cross Slide | Not Available |
| Second Spindle Nose | Not Available |
| Maximum Bar Diameter | Not Available |
| Mill Spindle Power | Not Available |
| Z-Axis Travel (L) | Not Available |
| Horsepower | Not Available |
| Machine Dimensions | Not Available |
| # Axis | Not Available |
| Rear Chuck Prep | Not Available |
| Z-Axis Rapid Feedrate | Not Available |
| Parts Conveyor | Not Available |
| Travels | Not Available |
| Maximum Machining Length | Not Available |
| Features | Not Available |
| Maximum Machining Length For Shaftwork | Not Available |
| X Rapid Traverse Rate | Not Available |
| Machine Height | Not Available |
| Turret Air Blast | Not Available |
| Chuck Size (Subspindle) | Not Available |
| Second Chuck Size | Not Available |
| Spindle Horsepower (30 Min.) | Not Available |
| W - Axis Travel Sub Spindle | Not Available |
| Coolant System | Not Available |
| Tool Type | Not Available |
| Z-Axis | Not Available |
| Spindle Horsepower 1 | Not Available |
| Programmable Tailstock | Not Available |
| C-Axis | Not Available |
| Max RPM | Not Available |
| Spindle Motor | Not Available |
| Spindle Bore Diameter 1, 2 | Not Available |
| Gantry Load / Unloading | Not Available |
| Center To Center | Not Available |
| Spindle Nose 1 | Not Available |
| Power | Not Available |
| Control Circuit | Not Available |
| Power Source | Not Available |
| Bar Feed | Not Available |
| Maximum Machining Diameter (Lower) | Not Available |
| Machine Weight | Not Available |
| Tailstock Quill Stroke | Not Available |
| Rated Capacity | Not Available |
| Max Cutting / Turning Diameter | Not Available |
| Spindle | Not Available |
| Power Requirement | Not Available |
| Motor Output (Half-Hourly Rating) | Not Available |
| Main Spindle Chuck Size | Not Available |
| Maximum Swing Over Lower Turret | Not Available |
| Feedrate | Not Available |
| Mill Spindle Maximum RPM | Not Available |
| Other | Max. |
Do you have a Mazak QUICK-TURN-NEXUS-200MY to sell?
We are actively seeking a 2004 Mazak Quick-Turn-Nexus-200MY, a highly efficient 2-Axis CNC lathe that excels in precision and productivity. This impressive turning center features a swing diameter of 26.6 inches and is capable of handling a maximum turning diameter of 14.8 inches with a length of 21.3 inches. Equipped with an 8-inch chuck and a bar capacity of 2 inches, this machine is ideal for a variety of machining applications. The Quick-Turn-Nexus-200MY boasts a powerful 35 HP spindle motor that allows it to reach speeds of up to 5000 RPM, ensuring quick cycle times and enhanced operational efficiency.
It is designed with the advanced Mazatrol 640T Nexus control, which simplifies programming and operation, making it suitable for both experienced machinists and newcomers alike. Additionally, its integrated chip conveyor and tailstock support further enhance its usability in a busy production environment. If you're looking to sell your Mazak Quick-Turn-Nexus-200MY, we are prepared to offer you a competitive price and a hassle-free transaction. Our team at Superior Machine Tools specializes in the purchase of used CNC machines, and we understand the market value of your equipment.
Reach out to us today to discuss the potential sale of your machine and find out how we can assist you in making the most of your investment. Don't miss the opportunity to work with a trusted buyer who values your machinery as much as you do.
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.