Haas TL-4

What the maker published about the Haas TL-4

Haas Automation's TL-4 is a large-capacity CNC flatbed toolroom lathe. Its spindle has an A1-20 nose at the front and another at the rear, and it takes two chucks of up to 25 in (635 mm). Through the spindle runs a 10.81 in (275 mm) bore. Maximum capacity is 35 in by 80 in (889 x 2032 mm), with 35 in of swing. A 55 hp (41 kW) drive works through a 2-speed gearbox, and spindle speed peaks at 500 rpm. The tailstock is manual, and coolant capacity is 100 gallons (379 liters). Programs can be built in the Haas programming system without any G-code, and a thread-repair screen for jobs typical of oilfield work is built in. The control stores 1 MB of programs, displays on a 15 in color LCD monitor and has a USB port. The machine came with no workholding, toolpost or toolholders, and the lathe runs on three-phase power only.

Source: Haas Automation, an archived copy of the maker's page from 2009, October 27, 2026.

What the Haas TL-4 is used for

Haas aims the TL-4 at oilfield work, building into its control a screen for repairing threads, and at big parts, with front and rear spindle noses that take chucks of up to 25 in and a 10.81 in through-bore, on a toolroom lathe run by Haas CNC.

Source: Haas Automation, an archived copy of the maker's page from 2009, October 27, 2026.

Haas TL-4 listing history

Where it was listed

Model years seen

2009, 2008 ×3, 2007 ×4.

What Haas TL-4 listings agree on

Looking for a Haas TL-4 for sale?

We have tracked 8 Haas TL-4 listings on 6 marketplaces (usedcnc.com, equipt.com, machinestation.us, machinesused.com, machinetools.com and surplusrecord.com), model years 2007 to 2009. We buy Haas TL-4 machines and do not sell them.

2009 · 2008 · 2008 · 2008 · 2007 · 2007 · 2007 · 2007

Every Haas TL-4 we have tracked

The Haas TL-4 among lathes and turning centers

Browse all CNC Lathes, or see every Haas machine we track.

Models related to the Haas TL-4